Background, aim and scope Sources of organic micropollutants occuring in surface waters are often unknown. Regarding environmental risk assessments for surface waters, construction materials have as till now, not been given much consideration, although biocides used as preservatives are known to reach urban storm water runoff. The study focused on biocides for facades coatings and aimed (1) to determine ecotoxicological effect values, (2) to quantify the leaching behaviour and (3) to assess the environmental risk for surface waters using a dynamic transport model.
Materials and methods Eight biocides used in resin based facade coatings were investigated. Some biocides are substances known as pesticides for agricultural purposes like diuron, carbendazim and terbutryn. Ecotoxicological effect values for aquatic organisms were determined for every biocide. Leaching of four biocides from a render under UV-irradiation has been investigated in the laboratory including the influence of varying temperatures. Using 80 irrigation intervals over 28 days, facade runoff was sampled and followed by biocide chemical analysis. The total losses were calculated based on the concentration patterns. These data were used for modelling the transport of cybutryn from facades to surface waters. Biocide specific effect values and leaching characteristics have been taken into consideration.
Results Acute and chronic effect values as well as predicted no effect concentrations for the investigated biocides indicate their high potential to affect aquatic organisms. The leaching of four biocides (diuron, terbutryn, cybutryn, carbendazim) from the facade render under the experimental conditions delivers high concentrations in the beginning followed by an exponential decrease. Rising temperature increased the concentration of biocides in the runoff. The total losses were between 7 % and 29 % depending on the substances. More than half of the losses occur in the runoff within the first 15 min of runoff from a 60 min irrigation cycle. The modelling result for cybutryn underlines its high environmental risk for small surface waters.
Discussion The leaching of the biocides, their potential ecotoxic effects and persistence show clearly that the environmental risk for surface waters and soils seems to be high for certain biocides; whereas for others the risk seems to be significantly lower. With respect water quality criteria, polluted facades runoff has to be diluted before runoff can enter the discharge. Diuron and carbendazim are however also used as pesticides and preservatives for other materials and cybutryn is also used as an antifouling agent. All pathways have to be evaluated in order to identify relevant sources and to act more efficiently with respect to water and soil protection.
Conclusions Concentrations with high environmental risk are expected at new facades, especially at facades with thermal insulation. With the given low predicted no effect concentrations in a range of a few ng/L and large amounts of biocides applied in paints and renders, the environmental risk for common biocides used in facade coatings has to be investigated in laboratory and field scale. It seems plausible that source control measures as the most efficient and sustainable precautionary principle need to be evaluated.
Recommendations and perspectives Biocides and additives applied in construction materials have to be taken into consideration as relevant sources when evaluating the quality of storm water runoff, discharge into urban areas and the impact to soil and surface waters. A sustainable construction material management and storm water management are required. It is expected that ongoing laboratory and field studies with exterior paints, renders and flat sheets for waterproofing containing biocides and additives will give further insight into their environmental impact.