Waste materials from coal mining and consumer products can pose significant risks to the environment. Residual coal deposits lead to the formation of acid drainage and release of contaminants, causing negative changes in soil and aquatic systems. Low density polyethylene (LDPE) polymers are an environmental concern due to their high useage, and slow degradation in the environment. In this study both waste materials were used to develop a composite to mitigate the environmental impacts of coal mining waste (CMW). The composite material was produced in different formulations (0-80 % wt CMW), and samples were tested for formation of acid drainage and release of contaminants. Chemical characterisation of the CMW and leachate of the composite materials was performed by X-ray fluorescence and atomic absorption spectrometry. Ecotoxicological effects in soil and water were investigated using standard tests with the earthworm, Eisenia fetida, the collembolan, Folsomia candida and the bacterium, Aliivibrio fischeri. Composites with 20 % wt LDPE showed a 50% increase in the pH value of the leachate compared to the CMW leachate. Iron, aluminium and sulfate concentrations were lower in leachates of the composite materials, and a reduction in the ecotoxicological impact on the tested organisms was observed. The hydrophobic nature of the composite's polymeric matrix as well its physical properties contributed to a better coating of the coal residue particles, blocking the contact with water and reducing the environmental risks of CMW. These results show that the production of composite material is a viable alternative route for treating coal and LDPE waste.