Query

Active Filters

  • (-) Empa Laboratories = 307 Center for Synergetic Structures
Search Results 1 - 20 of 65

Pages

  • RSS Feed
Select Page
Pumping cycle kite power with twings
Luchsinger, R., Aregger, D., Bezard, F., Costa, D., Galliot, C., Gohl, F., … Smith, R. S. (2018). Pumping cycle kite power with twings. In R. Schmehl (Ed.), Green energy and technology. Airborne wind energy. Advances in technology development and research (pp. 603-621). https://doi.org/10.1007/978-981-10-1947-0_24
Modal identification and dynamic response assessment of a tensairity girder
Klis, R., Chatzi, E., Galliot, C., Luchsinger, R., & Feltrin, G. (2017). Modal identification and dynamic response assessment of a tensairity girder. Journal of Structural Engineering, 143(2), 04016165 (11 pp.). https://doi.org/10.1061/(ASCE)ST.1943-541X.0001637
Experimental and numerical investigation of a tensairity arch
Roekens, J., De Laet, L., Mollaert, M., & Luchsinger, R. (2016). Experimental and numerical investigation of a tensairity arch. Thin-Walled Structures, 105, 112-120. https://doi.org/10.1016/j.tws.2016.04.010
A new generation of temporary pavilions based on tensairity girders
Beccarelli, P., Maffei, R., Galliot, C., & Luchsinger, R. H. (2015). A new generation of temporary pavilions based on tensairity girders. Steel Construction: Design and Research, 8(4), 259-264. https://doi.org/10.1002/stco.201510036
Ducati Superbike Pavilion: Design and manufacturing of a Tensairity<sup>®</sup> roof
Beccarelli, P., Maffei, R., Luchsinger, R. H., & Chilton, J. (2015). Ducati Superbike Pavilion: Design and manufacturing of a Tensairity® roof. In E. Oñate, K. U. Bletzinger, & B. Kröplin (Eds.), Structural membranes 2015. VII international conference on textile composites and inflatable structures (pp. 115-125).
Measuring sub-mm structural displacements using QDaedalus: a digital clip-on measuring system developed for total stations
Charalampous, E., Psimoulis, P., Guillaume, S., Spiridonakos, M., Klis, R., Bürki, B., … Feltrin, G. (2015). Measuring sub-mm structural displacements using QDaedalus: a digital clip-on measuring system developed for total stations. Applied Geomatics, 7(2), 91-101. https://doi.org/10.1007/s12518-014-0150-z
Biochemical properties and yields of diverse bacterial laccase-like multicopper oxidases expressed in <I>Escherichia coli</I>
Ihssen, J., Reiss, R., Luchsinger, R., Thöny-Meyer, L., & Richter, M. (2015). Biochemical properties and yields of diverse bacterial laccase-like multicopper oxidases expressed in Escherichia coli. Scientific Reports, 5, 10465 (13 pp.). https://doi.org/10.1038/srep10465
Morphological control: a design principle for applications in space science
Füchslin, R. M., Dumont, E., Flumini, D., Fuchs, H. U., Hauser, H., Jaeger, C., … Weyland, M. (2014). Morphological control: a design principle for applications in space science. JBIS. Journal of the British Interplanetary Society, 67(7), 305-313.
Near-wake measurements in an offhore reference field using a kite-borne aerodynamic probe system
Ettlin, K., Mansour, M., Subramanian, B., Costa, D., Chokani, N., & Abhari, R. S. (2013). Near-wake measurements in an offhore reference field using a kite-borne aerodynamic probe system. In Vol. 3. European wind energy conference & exhibition (EWEC 2013) (pp. 1783-1789). European Wind Energy Association.
Morphological computation and morphological control: steps toward a formal theory and applications
Füchslin, R. M., Dzyakanchuk, A., Flumini, D., Hauser, H., Hunt, K. J., Luchsinger, R. H., … Walker, R. (2013). Morphological computation and morphological control: steps toward a formal theory and applications. Artificial Life, 19(1), 9-34. https://doi.org/10.1162/artl_a_00079
Structural behavior of symmetric spindle-shaped Tensairity girders with reinforced chord coupling
Galliot, C., & Luchsinger, R. H. (2013). Structural behavior of symmetric spindle-shaped Tensairity girders with reinforced chord coupling. Engineering Structures, 56, 407-416. https://doi.org/10.1016/j.engstruct.2013.05.023
Simulation based wing design for kite power
Gohl, F., & Luchsinger, R. H. (2013). Simulation based wing design for kite power. In U. Ahrens, M. Diehl, & M. Schmehl (Eds.), Green Energy and Technology: Vol. Part III. Airborne wind energy (pp. 325-338). https://doi.org/10.1007/978-3-642-39965-7_18
Pumping cycle kite power
Luchsinger, R. H. (2013). Pumping cycle kite power. In U. Ahrens, M. Diehl, & M. Schmehl (Eds.), Green Energy and Technology: Vol. Part I. Airborne wind energy (pp. 47-64). https://doi.org/10.1007/978-3-642-39965-7_3
Structural behavior of symmetric spindle-shaped tensairity girders
Luchsinger, R. H., & Galliot, C. (2013). Structural behavior of symmetric spindle-shaped tensairity girders. Journal of Structural Engineering, 139(2), 169-179. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000619
The new lightweight structure: tensairity
Luchsinger, R. H. (2013). The new lightweight structure: tensairity. In R. Motro (Ed.), Flexible composite materials in architecture, construction and interiors (pp. 100-111). Birkhäuser Verlag.
Investigation of a fast mechanical self-repair mechanism for inflatable structures
Rampf, M., Speck, O., Speck, T., & Luchsinger, R. H. (2013). Investigation of a fast mechanical self-repair mechanism for inflatable structures. International Journal of Engineering Science, 63, 61-70. https://doi.org/10.1016/j.ijengsci.2012.11.002
Bio-inspired self-healing materials
Speck, T., Bauer, G., Flues, F., Oelker, K., Rampf, M., Schüssele, A. C., … Speck, O. (2013). Bio-inspired self-healing materials. In P. Fratzl, J. W. C. Dunlop, & R. Weinkamer (Eds.), RSC smart material: Vol. 4. Materials design inspired by nature: function through inner architecture (pp. 359-389). https://doi.org/10.1039/9781849737555-00359
Drop weight tensile impact testing of adhesively bonded carbon/epoxy laminate joints
Galliot, C., Rousseau, J., & Verchery, G. (2012). Drop weight tensile impact testing of adhesively bonded carbon/epoxy laminate joints. International Journal of Adhesion and Adhesives, 35, 68-75. https://doi.org/10.1016/j.ijadhadh.2012.02.002
Strong &amp; light: inflatable structures with tensairity
Luchsinger, R. H., & Galliot, C. (2012). Strong & light: inflatable structures with tensairity. In S. W. Beckwith, M. Maher, G. M. Newaz, & G. R. Villanueva (Eds.), SAMPE 2012 - connecting the advanced materials community, Baltimore, MD, May 21-24, 2012. Baltimore: Society for the Advancement of Material and Process Engineering (SAMPE).
Biomimetic products
Masselter, T., Bauer, G., Gallenmüller, F., Haushahn, T., Poppinga, S., Schmitt, C., … Schwager, H. (2012). Biomimetic products. In Y. Bar-Cohen (Ed.), Biomimetics: nature-based innovation (pp. 377-429). CRC Press.
 

Pages