Query

Active Filters

  • (-) Organizational Unit = 405 Transport at Nanoscale Interfaces
  • (-) Publication Year = 2006 - 2006
Search Results 1 - 20 of 36
Select Page
Interface formation in infiltrated Al(Si)/diamond composites
Beffort, O., Khalid, F. A., Weber, L., Ruch, P., Klotz, U. E., Meier, S., & Kleiner, S. (2006). Interface formation in infiltrated Al(Si)/diamond composites. Diamond and Related Materials, 15(9), 1250-1260. https://doi.org/10.1016/j.diamond.2005.09.036
Reliability, standardization, and validation of optical fiber sensors
Brönnimann, R., Held, M., & Nellen, P. M. (2006). Reliability, standardization, and validation of optical fiber sensors (p. 4 pp.). Presented at the 18th International Conference on Optical Fiber Sensors. .
Measurement of the thermal conductivity of individual carbon nanotubes by the four-point three-<I>ω</I> method
Choi, T. Y., Poulikakos, D., Tharian, J., & Sennhauser, U. (2006). Measurement of the thermal conductivity of individual carbon nanotubes by the four-point three-ω method. Nano Letters, 6(8), 1589-1593. https://doi.org/10.1021/nl060331v
Computer tomography for 3-D volume acquisition and defect analysis
Flisch, A. (2006). Computer tomography for 3-D volume acquisition and defect analysis. Casting Plant and Technology International (3), 10-17.
Computertomographie zur 3-D-Volumenerfassung und Defektanalyse
Flisch, A. (2006). Computertomographie zur 3-D-Volumenerfassung und Defektanalyse. Giesserei, 93(8), 26-30.
Industrial computer tomography for 3D data acquisition and defects analysis
Flisch, A. (2006). Industrial computer tomography for 3D data acquisition and defects analysis (p. (7 pp.). Presented at the 46th international foundry conference. .
Industrielle Computertomographie zur 3D-Volumenerfassung und Defektanalyse. lndustrial computed tomography as tool for 3D-volume digitizing and defect analysis
Flisch, A. (2006). Industrielle Computertomographie zur 3D-Volumenerfassung und Defektanalyse. lndustrial computed tomography as tool for 3D-volume digitizing and defect analysis. Giesserei Rundschau, 53(5-6), 86-88.
ESPI-measurement of a strain gradients in a CFRP-reinforced bending beam
Hack, E., & Schumacher, A. (2006). ESPI-measurement of a strain gradients in a CFRP-reinforced bending beam (p. 2 pp.). Presented at the Photomechanics 2006, International Conference on Full-Field Measurement Techniques and their Applications in Experimental Solid Mechanics. .
Improvement of speckle correlation fringes by adaptive correction using twisted nematic LCD
Hack, E., & Gundu, P. N. (2006). Improvement of speckle correlation fringes by adaptive correction using twisted nematic LCD. In P. Slangen & C. Cerruti (Eds.), Proceedings of SPIE: Vol. 6341. Speckle06: speckles, from grains to flowers (p. 63410L (6 pp.). https://doi.org/10.1117/12.695289
Transesophageal real-time three-dimensional echocardiography. Methods and initial in vitro and human in vivo studies
Handke, M., Heinrichs, G., Moser, U., Hirt, F., Margadant, F., Gattiker, F., Bode, C., & Geibel, A. (2006). Transesophageal real-time three-dimensional echocardiography. Methods and initial in vitro and human in vivo studies. Journal of the American College of Cardiology, 48(10), 2070-2076. https://doi.org/10.1016/j.jacc.2006.08.013
Fabrication and electrical characterization of circuits based on individual tin oxide nanowires
Hernández-Ramírez, F., Tarancón, A., Casals, O., Rodríguez, J., Romano-Rodríguez, A., Morante, J. R., Barth, S., Mathur, S., Choi, T. Y., Poulikakos, D., Callegari, V., & Nellen, P. M. (2006). Fabrication and electrical characterization of circuits based on individual tin oxide nanowires. Nanotechnology, 17(22), 5577-5583. https://doi.org/10.1088/0957-4484/17/22/009
A wall-thickness-based method of adaptive integration time determination for X-ray computed tomography
Hofmann, J., & Flisch, A. (2006). A wall-thickness-based method of adaptive integration time determination for X-ray computed tomography. NDT and E International, 39(8), 668-674. https://doi.org/10.1016/j.ndteint.2006.06.001
Full-scale field tests on geosynthetic reinforced unpaved roads on soft subgrade
Hufenus, R., Rueegger, R., Banjac, R., Mayor, P., Springman, S. M., & Brönnimann, R. (2006). Full-scale field tests on geosynthetic reinforced unpaved roads on soft subgrade. Geotextiles and Geomembranes, 24(1), 21-37. https://doi.org/10.1016/j.geotexmem.2005.06.002
RFID (Radio frequency identification devices) - A new, important challenge for future electronic waste recycling
Jacob, P. (2006). RFID (Radio frequency identification devices) - A new, important challenge for future electronic waste recycling (p. 5 pp.). Presented at the 6th International Symposium Going Green, Care Innovation 2006. .
Reliability and wearout characterisation of LEDs
Jacob, P., Kunz, A., & Nicoletti, G. (2006). Reliability and wearout characterisation of LEDs. Microelectronics and Reliability, 46(9-11), 1711-1714. https://doi.org/10.1016/j.microrel.2006.07.048
Surface electrostatic damage by microprocess robotic machines: diagnosis and reliability, process auditing, and remedies.
Jacob, P., & Nicoletti, G. (2006). Surface electrostatic damage by microprocess robotic machines: diagnosis and reliability, process auditing, and remedies. IEEE Transactions on Device and Materials Reliability, 6(2), 213-220. https://doi.org/10.1109/TDMR.2006.877863
Film formation and characterization of anodic oxides on titanium for biomedical applications
Jaeggi, C., Kern, P., Michler, J., Patscheider, J., Tharian, J., & Munnik, F. (2006). Film formation and characterization of anodic oxides on titanium for biomedical applications. Surface and Interface Analysis, 38(4), 182-185. https://doi.org/10.1002/sia.2261
Deformation and degradation of Sn3.8Ag0.7Cu lead-free solder alloy
Jud, P. P. (2006). Deformation and degradation of Sn3.8Ag0.7Cu lead-free solder alloy [Doctoral dissertation, ETH Zürich]. https://doi.org/10.3929/ethz-a-005214775
Local fatigue in lead-free SnAg3.8Cu0.7 solder
Jud, P. P., Grossmann, G., Sennhauser, U., & Uggowitzer, P. J. (2006). Local fatigue in lead-free SnAg3.8Cu0.7 solder. Advanced Engineering Materials, 8(3), 179-183. https://doi.org/10.1002/adem.200500244
Effect of diamond crystallographic orientation on dissolution and carbide formation in contact with liquid aluminium
Kleiner, S., Khalid, F. A., Ruch, P. W., Meier, S., & Beffort, O. (2006). Effect of diamond crystallographic orientation on dissolution and carbide formation in contact with liquid aluminium. Scripta Materialia, 55(4), 291-294. https://doi.org/10.1016/j.scriptamat.2006.05.003