Active Filters

  • (-) … = empa-units:7
  • (-) Empa Authors ≠ Ghisleni, Rudy
Search Results 1 - 20 of 581

Pages

  • RSS Feed
Select Page
Unravelling keyhole instabilities and laser absorption dynamics during laser irradiation of Ti6Al4V: a high-fidelity thermo-fluidic study
Aggarwal, A., Shin, Y. C., & Kumar, A. (2024). Unravelling keyhole instabilities and laser absorption dynamics during laser irradiation of Ti6Al4V: a high-fidelity thermo-fluidic study. International Journal of Heat and Mass Transfer, 219, 124841 (23 pp.). https://doi.org/10.1016/j.ijheatmasstransfer.2023.124841
Effect of hydrogen on the chemical state, stoichiometry and density of amorphous Al<sub>2</sub>O<sub>3</sub> films grown by thermal atomic layer deposition
Cancellieri, C., Gramatte, S., Politano, O., Lapeyre, L., Klimashin, F. F., Mackosz, K., … Jeurgens, L. P. H. (2024). Effect of hydrogen on the chemical state, stoichiometry and density of amorphous Al2O3 films grown by thermal atomic layer deposition. Surface and Interface Analysis. https://doi.org/10.1002/sia.7282
Laser metal deposition of titanium on stainless steel with high powder flowrate for high interfacial strength
Cui, D., Aggarwal, A., & Leparoux, M. (2024). Laser metal deposition of titanium on stainless steel with high powder flowrate for high interfacial strength. International Journal of Material Forming, 17(2), 18 (11 pp.). https://doi.org/10.1007/s12289-024-01820-4
Classification of progressive wear on a multi-directional pin-on-disc tribometer simulating conditions in human joints-UHMWPE against CoCrMo using acoustic emission and machine learning
Deshpande, P., Wasmer, K., Imwinkelried, T., Heuberger, R., Dreyer, M., Weisse, B., … Pandiyan, V. (2024). Classification of progressive wear on a multi-directional pin-on-disc tribometer simulating conditions in human joints-UHMWPE against CoCrMo using acoustic emission and machine learning. Lubricants, 12(2), 47 (23 pp.). https://doi.org/10.3390/lubricants12020047
Origin of the enhanced pseudo-elasticity of additively manufactured Fe-17Mn-5Si-4Ni-10Cr-(V, C) shape memory alloy fabricated by laser powder bed fusion
Kim, D., Ferretto, I., Park, G. W., Leinenbach, C., Kim, W., & Lee, W. (2024). Origin of the enhanced pseudo-elasticity of additively manufactured Fe-17Mn-5Si-4Ni-10Cr-(V, C) shape memory alloy fabricated by laser powder bed fusion. Journal of Alloys and Compounds, 976, 173226 (11 pp.). https://doi.org/10.1016/j.jallcom.2023.173226
Monitoring of Laser Powder Bed Fusion process by bridging dissimilar process maps using deep learning-based domain adaptation on acoustic emissions
Pandiyan, V., Wróbel, R., Richter, R. A., Leparoux, M., Leinenbach, C., & Shevchik, S. (2024). Monitoring of Laser Powder Bed Fusion process by bridging dissimilar process maps using deep learning-based domain adaptation on acoustic emissions. Additive Manufacturing, 80, 103974 (13 pp.). https://doi.org/10.1016/j.addma.2024.103974
Site-specifically tailored microstructures with enhanced strength and hardening through laser powder bed fusion
Sofras, C., Čapek, J., Li, X., Roth, C. C., Leinenbach, C., Logé, R. E., … Polatidis, E. (2024). Site-specifically tailored microstructures with enhanced strength and hardening through laser powder bed fusion. Materials and Design, 237, 112539 (11 pp.). https://doi.org/10.1016/j.matdes.2023.112539
The role of process parameters and printing position on meltpool variations in LPBF Hastelloy X: insights into laser-plume interaction
Tang, J., Wróbel, R., Scheel, P., Gaechter, W., Leinenbach, C., & Hosseini, E. (2024). The role of process parameters and printing position on meltpool variations in LPBF Hastelloy X: insights into laser-plume interaction. Additive Manufacturing Letters, 9, 100203 (6 pp.). https://doi.org/10.1016/j.addlet.2024.100203
Explaining the effect of in-plane strain on thermal degradation kinetics of Cu/W nano-multilayers
Troncoso, J. F., Lorenzin, G., Cancellieri, C., & Turlo, V. (2024). Explaining the effect of in-plane strain on thermal degradation kinetics of Cu/W nano-multilayers. Scripta Materialia, 242, 115902 (5 pp.). https://doi.org/10.1016/j.scriptamat.2023.115902
Influence of wall thickness on microstructure and mechanical properties of thin-walled 316L stainless steel produced by laser powder bed fusion
Wrobel, R., Del Guidice, L., Scheel, P., Abando, N., Maeder, X., Vassiliou, M., … Leinenbach, C. (2024). Influence of wall thickness on microstructure and mechanical properties of thin-walled 316L stainless steel produced by laser powder bed fusion. Materials and Design, 238, 112652. https://doi.org/10.1016/j.matdes.2024.112652
Healing of keyhole porosity by means of defocused laser beam remelting: operando observation by X-ray imaging and acoustic emission-based detection
de Formanoir, C., Hamidi Nasab, M., Schlenger, L., Van Petegem, S., Masinelli, G., Marone, F., … Logé, R. E. (2024). Healing of keyhole porosity by means of defocused laser beam remelting: operando observation by X-ray imaging and acoustic emission-based detection. Additive Manufacturing, 79, 103880 (18 pp.). https://doi.org/10.1016/j.addma.2023.103880
Investigation of laser beam attenuation and energy partitioning during coaxial laser directed energy deposition process
Aggarwal, A., Leparoux, M., Turlo, V., & Leinenbach, C. (2023). Investigation of laser beam attenuation and energy partitioning during coaxial laser directed energy deposition process. Presented at the Alloys for additive manufacturing symposium (AAMS 2023). Madrid.
A molecular dynamics study of Ag-Ni nanometric multilayers: thermal behavior and stability
Baras, F., Politano, O., Li, Y., & Turlo, V. (2023). A molecular dynamics study of Ag-Ni nanometric multilayers: thermal behavior and stability. Nanomaterials, 13(14), 2134 (24 pp.). https://doi.org/10.3390/nano13142134
All-optical switching of liquid crystals at terahertz frequencies enabled by metamaterials
Beddoes, B., Perivolari, E., Kaczmarek, M., Apostolopoulos, V., & Fedotov, V. A. (2023). All-optical switching of liquid crystals at terahertz frequencies enabled by metamaterials. Optics Express, 31(11), 18336-18345. https://doi.org/10.1364/OE.488360
Molecular dynamics simulations of nanoscale solidification in the context of Ni additive manufacturing
Bizot, Q., Politano, O., Turlo, V., & Baras, F. (2023). Molecular dynamics simulations of nanoscale solidification in the context of Ni additive manufacturing. Materialia, 27, 101639 (14 pp.). https://doi.org/10.1016/j.mtla.2022.101639
Time-of-flight polarization contrast neutron imaging for enhanced characterization of ferritic phase fractions in Fe-Mn-Si shape memory alloys
Busi, M., Ferretto, I., Malamud, F., Leinenbach, C., & Strobl, M. (2023). Time-of-flight polarization contrast neutron imaging for enhanced characterization of ferritic phase fractions in Fe-Mn-Si shape memory alloys. In Journal of physics: conference series: Vol. 2605. International topical meeting on neutron radiography (p. 012025 (9 pp.). https://doi.org/10.1088/1742-6596/2605/1/012025
Encoder-decoder based convolutional neural network (EDCNN) for video classification of smoke and fire image
Caesarendra, W., Pandiyan, V., Umar, M. M., Pamungkas, D. S., Sulowicz, M., & Yassin, H. (2023). Encoder-decoder based convolutional neural network (EDCNN) for video classification of smoke and fire image. In W. R. Puspita (Ed.), AIP conference proceedings: Vol. 2665. International conference on applied engineering (p. 040012 (9 pp.). https://doi.org/10.1063/5.0127353
Effect of HfO<sub>2</sub> dispersoids on the microstructure of a Ni-Cr-Al-Ti superalloy processed by laser-based powder-bed fusion
De Luca, A., Kenel, C., Dunand, D. C., & Leinenbach, C. (2023). Effect of HfO2 dispersoids on the microstructure of a Ni-Cr-Al-Ti superalloy processed by laser-based powder-bed fusion. Additive Manufacturing Letters, 6, 100139 (6 pp.). https://doi.org/10.1016/j.addlet.2023.100139
Acoustic emission for the prediction of processing regimes in Laser Powder Bed Fusion, and the generation of processing maps
Drissi-Daoudi, R., Masinelli, G., de Formanoir, C., Wasmer, K., Jhabvala, J., & Logé, R. E. (2023). Acoustic emission for the prediction of processing regimes in Laser Powder Bed Fusion, and the generation of processing maps. Additive Manufacturing, 67, 103484 (14 pp.). https://doi.org/10.1016/j.addma.2023.103484
Material testing of micro-concrete and 3D-printed reinforcement for use in small-scale seismic testing of RC structures
Elmorsy, M., Wrobel, R., Leinenbach, C., & Vassiliou, M. F. (2023). Material testing of micro-concrete and 3D-printed reinforcement for use in small-scale seismic testing of RC structures. In M. Papadrakakis & M. Fragiadakis (Eds.), COMPDYN proceedings. 9th ECCOMAS thematic conference on computational methods in structural dynamics and earthquake engineering (COMPDYN 2023) (p. (11 pp.). https://doi.org/10.3929/ethz-b-000615924
 

Pages