Active Filters

  • (-) Empa Authors = Schwiedrzik, Johann J.
  • (-) Empa Authors ≠ Mohanty, Gaurav
  • (-) Empa Authors ≠ Groetsch, Alexander
Search Results 1 - 20 of 80

Pages

  • RSS Feed
Select Page
The use of (3D) HR-EBSD to investigate the brittle to ductile transition in single crystal tungsten
Ast, J., Kalácska, S., Schwiedrzik, J., Polyakov, M., Michler, J., & Maeder, X. (2018). The use of (3D) HR-EBSD to investigate the brittle to ductile transition in single crystal tungsten. Presented at the Gordon research conference on thin film and small scale mechanical behavior. Lewiston, USA.
Investigation of the microscale fracture behaviour of GaAs single crystals for mode I, II and III loading
Ast, J., Schwiedrzik, J., Pethö, L., Maeder, X., & Michler, J. (2018). Investigation of the microscale fracture behaviour of GaAs single crystals for mode I, II and III loading. Presented at the Gordon research conference on thin film and small scale mechanical behavior. Lewiston, USA.
Novel micro-scale specimens for mode-dependent fracture testing of brittle materials: a case study on GaAs single crystals
Ast, J., Schwiedrzik, J. J., Rohbeck, N., Maeder, X., & Michler, J. (2020). Novel micro-scale specimens for mode-dependent fracture testing of brittle materials: a case study on GaAs single crystals. Materials and Design, 193, 108765 (11 pp.). https://doi.org/10.1016/j.matdes.2020.108765
Interfacial fracture behavior and adhesive strength in tensile and shear loading of SiC-PyC-SiC composites by micro-scale specimens
Ast, J., Tian, C., Herre, P., Rohbeck, N., Casari, D., Michler, J., … Schwiedrzik, J. J. (2023). Interfacial fracture behavior and adhesive strength in tensile and shear loading of SiC-PyC-SiC composites by micro-scale specimens. Acta Materialia, 259, 119273 (12 pp.). https://doi.org/10.1016/j.actamat.2023.119273
The brittle-ductile transition of tungsten single crystals at the micro-scale
Ast, J., Schwiedrzik, J. J., Wehrs, J., Frey, D., Polyakov, M. N., Michler, J., & Maeder, X. (2018). The brittle-ductile transition of tungsten single crystals at the micro-scale. Materials and Design, 152, 168-180. https://doi.org/10.1016/j.matdes.2018.04.009
Enhanced mechanical properties and microstructural stability of ultrafine-grained biodegradable Zn–Li–Mn–Mg–Cu alloys produced by rapid solidification and high-pressure torsion
Bednarczyk, W., Wątroba, M., Cieślak, G., Ciemiorek, M., Hamułka, K., Schreiner, C., … Langdon, T. G. (2024). Enhanced mechanical properties and microstructural stability of ultrafine-grained biodegradable Zn–Li–Mn–Mg–Cu alloys produced by rapid solidification and high-pressure torsion. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 892, 146027 (16 pp.). https://doi.org/10.1016/j.msea.2023.146027
Exploring bone's basic building blocks microtensile properties and toughening mechanisms on the lamellar level
Casari, D., Michler, J., Zysset, P., & Schwiedrzik, J. (2019). Exploring bone's basic building blocks microtensile properties and toughening mechanisms on the lamellar level. Presented at the Nanomechanical testing in materials research and development VII. Malaga, Spain.
Tensile properties of bone extracellular matrix at the microscale
Casari, D., Pethö, L., Schürch, P., Brönnimann, R., Philippe, L., Michler, J., … Schwiedrzik, J. (2018). Tensile properties of bone extracellular matrix at the microscale. Presented at the WCB 2018: 8th world congress of biomechanics. Dublin, Ireland.
Design and validation of a testing setup to measure tensile properties of materials at the microscale
Casari, D., Pethö, L., Schürch, P., Philippe, L., Michler, J., Zysset, P., & Schwiedrzik, J. (2018). Design and validation of a testing setup to measure tensile properties of materials at the microscale. Presented at the 2nd EuFN workshop 2018. Grenoble, France.
Experimental design for uniaxial tensile measurements at the microscale
Casari, D., Michler, J., Zysset, P., & Schwiedrzik, J. (2017). Experimental design for uniaxial tensile measurements at the microscale. Presented at the Empa PhD students' symposium 2017. Dübendorf, Switzerland.
Experimental design for uniaxial tensile measurements at the microscale
Casari, D., Michler, J., Zysset, P., & Schwiedrzik, J. (2017). Experimental design for uniaxial tensile measurements at the microscale. Presented at the Nanomechanical Testing in Materials Research and Development VI. Dubrovnik, Croatia.
A self-aligning microtensile setup: application to single-crystal GaAs microscale tension–compression asymmetry
Casari, D., Pethö, L., Schürch, P., Maeder, X., Philippe, L., Michler, J., … Schwiedrzik, J. (2019). A self-aligning microtensile setup: application to single-crystal GaAs microscale tension–compression asymmetry. Journal of Materials Research, 34(14), 2517-2534. https://doi.org/10.1557/jmr.2019.183
Microtensile failure mechanisms in lamellar bone: influence of fibrillar orientation, specimen size and hydration
Casari, D., Kochetkova, T., Michler, J., Zysset, P., & Schwiedrzik, J. (2021). Microtensile failure mechanisms in lamellar bone: influence of fibrillar orientation, specimen size and hydration. Acta Biomaterialia, 131, 391-402. https://doi.org/10.1016/j.actbio.2021.06.032
Microtensile properties and failure mechanisms of cortical bone at the lamellar level
Casari, D., Michler, J., Zysset, P., & Schwiedrzik, J. (2021). Microtensile properties and failure mechanisms of cortical bone at the lamellar level. Acta Biomaterialia, 120, 135-145. https://doi.org/10.1016/j.actbio.2020.04.030
On the thinnest Al<sub>2</sub>O<sub>3</sub> interlayers in Al‐based nanolaminates to enhance strength, and the role of constraint
Edwards, T. E. J., Xie, T., della Ventura, N. M., Casari, D., Guerra, C., Huszár, E., … Michler, J. (2022). On the thinnest Al2O3 interlayers in Al‐based nanolaminates to enhance strength, and the role of constraint. Acta Materialia, 240, 118345 (15 pp.). https://doi.org/10.1016/j.actamat.2022.118345
A closed-form analytical approach for the simple prediction of hard-coating failure for tooling systems
Esqué-de los Ojos, D., Best, J. P., Schwiedrzik, J., Morstein, M., & Michler, J. (2016). A closed-form analytical approach for the simple prediction of hard-coating failure for tooling systems. Surface and Coatings Technology, 308, 280-288. https://doi.org/10.1016/j.surfcoat.2016.07.090
Compressive behaviour of uniaxially aligned individual mineralised collagen fibres at the micro- and nanoscale
Groetsch, A., Gourrier, A., Schwiedrzik, J., Sztucki, M., Beck, R. J., Shephard, J. D., … Wolfram, U. (2019). Compressive behaviour of uniaxially aligned individual mineralised collagen fibres at the micro- and nanoscale. Acta Biomaterialia, 89, 313-329. https://doi.org/10.1016/j.actbio.2019.02.053
Nanomechanical testing at high strain rates: new instrumentation for nanoindentation and microcompression
Guillonneau, G., Mieszala, M., Wehrs, J., Schwiedrzik, J., Grop, S., Frey, D., … Wheeler, J. M. (2018). Nanomechanical testing at high strain rates: new instrumentation for nanoindentation and microcompression. Materials and Design, 148, 39-48. https://doi.org/10.1016/j.matdes.2018.03.050
In situ HR-EBSD investigation of deformation twinning in CP-Ti during micro-pillar compression testing
Guo, Y., Schwiedrzik, J., Michler, J., & Maeder, X. (2016). In situ HR-EBSD investigation of deformation twinning in CP-Ti during micro-pillar compression testing. Presented at the Gordon research conference. Lewiston, USA.
On the nucleation and growth of {112̅2} twin in commercial purity titanium: <I>in situ</I> investigation of the local stress field and dislocation density distribution
Guo, Y., Schwiedrzik, J., Michler, J., & Maeder, X. (2016). On the nucleation and growth of {112̅2} twin in commercial purity titanium: in situ investigation of the local stress field and dislocation density distribution. Acta Materialia, 120, 292-301. https://doi.org/10.1016/j.actamat.2016.08.073
 

Pages