Active Filters

  • (-) Empa Authors = Hoffmann, Patrik
Search Results 1 - 20 of 70

Pages

  • RSS Feed
Select Page
Photonic methods for rapid crystallization of LiMn<sub>2</sub>O<sub>4</sub> cathodes for solid-state thin-film batteries
Chen, X., Sastre, J., Rumpel, M., Flegler, A., Singhania, A., Balta Bonner, J., … Romanyuk, Y. E. (2021). Photonic methods for rapid crystallization of LiMn2O4 cathodes for solid-state thin-film batteries. Journal of Power Sources, 495, 229424 (9 pp.). https://doi.org/10.1016/j.jpowsour.2020.229424
High-purity copper structures from a perfluorinated copper carboxylate using focused electron beam induced deposition and post-purification
Berger, L., Jurczyk, J., Madajska, K., Edwards, T. E. J., Szymańska, I., Hoffmann, P., & Utke, I. (2020). High-purity copper structures from a perfluorinated copper carboxylate using focused electron beam induced deposition and post-purification. ACS Applied Electronic Materials, 2(7), 1989-1996. https://doi.org/10.1021/acsaelm.0c00282
Microstructure analysis of epitaxial BaTiO&lt;sub&gt;3&lt;/sub&gt; thin films on SrTiO&lt;sub&gt;3&lt;/sub&gt;-buffered Si: strain and dislocation density quantification using HRXRD methods
Borzì, A., Dolabella, S., Szmyt, W., Geler-Kremer, J., Abel, S., Fompeyrine, J., … Neels, A. (2020). Microstructure analysis of epitaxial BaTiO3 thin films on SrTiO3-buffered Si: strain and dislocation density quantification using HRXRD methods. Materialia, 14, 100953 (9 pp.). https://doi.org/10.1016/j.mtla.2020.100953
3D printing: fabrication of metal matrix composite by laser metal deposition and direct dry injection of nanopowders
Cui, D., Mohanta, A., Leparoux, M., Hoffmann, P., Favre, S., & Tortorici, P. (2020). 3D printing: fabrication of metal matrix composite by laser metal deposition and direct dry injection of nanopowders. Presented at the Medtronic science & technology online conference. Minneapolis, USA.
Epitaxial growth of silicon on silicon wafers by direct laser melting
Le Dantec, M., Abdulstaar, M., Leparoux, M., & Hoffmann, P. (2020). Epitaxial growth of silicon on silicon wafers by direct laser melting. Materials, 13(21), 4728 (8 pp.). https://doi.org/10.3390/ma13214728
Impact of oxygen content in powders on the morphology of the laser molten tracks in preparation for additive manufacturing of silicon
Le Dantec, M., Güniat, L., Leistner, M., Figi, R., Bleiner, D., Leparoux, M., & Hoffmann, P. (2020). Impact of oxygen content in powders on the morphology of the laser molten tracks in preparation for additive manufacturing of silicon. Powder Technology, 361, 704-710. https://doi.org/10.1016/j.powtec.2019.11.052
Nanosecond pulsed laser-processing of CVD diamond
Mouhamadali, F., Equis, S., Saeidi, F., Best, J. P., Cantoni, M., Hoffmann, P., & Wasmer, K. (2020). Nanosecond pulsed laser-processing of CVD diamond. Optics and Lasers in Engineering, 126, 105917 (12 pp.). https://doi.org/10.1016/j.optlaseng.2019.105917
Quest project. Direct 3D printing of dissimilar materials
Cui, D., Mohanta, A., Leparoux, M., Hoffmann, P., Favre, S., & Tortorici, P. (2019). Quest project. Direct 3D printing of dissimilar materials. Presented at the Medtronic science & technology conference. Minneapolis, USA.
A novel single-mode microwave assisted synthesis of metal oxide as visible-light photocatalyst
Kato, K., Vaucher, S., Hoffmann, P., Xin, Y., & Shirai, T. (2019). A novel single-mode microwave assisted synthesis of metal oxide as visible-light photocatalyst. Materials Letters, 235(000448000700031), 125-128. https://doi.org/10.1016/j.matlet.2018.09.132
Versatile micro- and nanotexturing techniques for antibacterial applications
Rowthu, S., & Hoffmann, P. (2019). Versatile micro- and nanotexturing techniques for antibacterial applications. In V. Dinca & M. P. Suchea (Eds.), Micro and nano technologies. Functional nanostructured interfaces for environmental and biomedical applications (pp. 27-62). https://doi.org/10.1016/B978-0-12-814401-5.00003-7
Microfabrication of curved sidewall grooves using scanning nanosecond excimer laser ablation
Gong, J., Violakis, G., Infante, D., Hoffmann, P., Kostro, A., & Schüler, A. (2018). Microfabrication of curved sidewall grooves using scanning nanosecond excimer laser ablation. In U. Klotzbach, K. Washio, & R. Kling (Eds.), Proceedings of SPIE: Vol. 10520. Laser-based micro- and nanoprocessing XII (p. 105200Z (8 pp.). https://doi.org/10.1117/12.2286908
Additive manufacturing of semiconductor silicon on silicon using direct laser melting
Le Dantec, M., Abdulstaar, M., Leistner, M., Leparoux, M., & Hoffmann, P. (2018). Additive manufacturing of semiconductor silicon on silicon using direct laser melting. In M. Meboldt & C. Klahn (Eds.), Industrializing additive manufacturing - proceedings of additive manufacturing in products and applications - AMPA2017 (pp. 104-116). https://doi.org/10.1007/978-3-319-66866-6_10
Flexural strength evaluations and fractography analyses of slip cast mesoporous submicron alumina
Rowthu, S., Saeidi, F., Wasmer, K., Hoffmann, P., & Kuebler, J. (2018). Flexural strength evaluations and fractography analyses of slip cast mesoporous submicron alumina. Ceramics International, 44(5), 5193-5201. https://doi.org/10.1016/j.ceramint.2017.12.125
Perfluoropolyether-impregnated mesoporous alumina composites overcome the dewetting-tribological properties trade-off
Rowthu, S., & Hoffmann, P. (2018). Perfluoropolyether-impregnated mesoporous alumina composites overcome the dewetting-tribological properties trade-off. ACS Applied Materials and Interfaces, 10(12), 10560-10570. https://doi.org/10.1021/acsami.8b00061
Microstructure and ferroelectricity of BaTiO<SUB>3</SUB> thin films on Si for integrated photonics
Kormondy, K. J., Popoff, Y., Sousa, M., Eltes, F., Caimi, D., Rossell, M. D., … Abel, S. (2017). Microstructure and ferroelectricity of BaTiO3 thin films on Si for integrated photonics. Nanotechnology, 28(7), 075706 (10 pp.). https://doi.org/10.1088/1361-6528/aa53c2
Fabrication of aluminium matrix nanocomposite powders by powder metallurgy
Leparoux, M., Le Dantec, M., Abdulstaar, M., & Hoffmann, P. (2017). Fabrication of aluminium matrix nanocomposite powders by powder metallurgy. Presented at the Alloys for additive manufacturing. Dübendorf, Switzerland.
Low temperature epitaxial barium titanate thin film growth in high vacuum CVD
Reinke, M., Kuzminykh, Y., Eltes, F., Abel, S., LaGrange, T., Neels, A., … Hoffmann, P. (2017). Low temperature epitaxial barium titanate thin film growth in high vacuum CVD. Advanced Materials Interfaces, 1700116 (8 pp.). https://doi.org/10.1002/admi.201700116
Molecular dimensions and surface diffusion assisted mechanically robust slippery perfluoropolyether impregnated mesoporous alumina interfaces
Rowthu, S., Balic, E. E., & Hoffmann, P. (2017). Molecular dimensions and surface diffusion assisted mechanically robust slippery perfluoropolyether impregnated mesoporous alumina interfaces. Nanotechnology, 28(50), 505605 (14 pp.). https://doi.org/10.1088/1361-6528/aa974a
Effects of laser surface texturing on the wear and failure mechanism of grey cast iron reciprocating against steel under starved lubrication conditions
Saeidi, F., Parlinska-Wojtan, M., Hoffmann, P., & Wasmer, K. (2017). Effects of laser surface texturing on the wear and failure mechanism of grey cast iron reciprocating against steel under starved lubrication conditions. Wear, 386-387, 29-38. https://doi.org/10.1016/j.wear.2017.05.015
Origin of scuffing in grey cast iron-steel tribo-system
Saeidi, F., Taylor, A. A., Meylan, B., Hoffmann, P., & Wasmer, K. (2017). Origin of scuffing in grey cast iron-steel tribo-system. Materials and Design, 116, 622-630. https://doi.org/10.1016/j.matdes.2016.12.044
 

Pages