Active Filters

  • (-) Empa Authors = Hoffmann, Patrik
  • (-) Keywords ≠ silicon
Search Results 1 - 20 of 75

Pages

  • RSS Feed
Select Page
Sewage water-repellent PDMS and magnetic silicone composites: lab to commercialization
Rowthu, S., Mattaparthi, S., Siringil, E., & Hoffmann, P. (2023). Sewage water-repellent PDMS and magnetic silicone composites: lab to commercialization. ACS Applied Polymer Materials, 5(8), 6161-6175. https://doi.org/10.1021/acsapm.3c00822
High vacuum chemical vapor deposition: high growth rate ALD-like film synthesis and epitaxial CVD for integrated photonics
Szmyt, W., Geler-Kremer, J., Abel, S., Fompeyrine, J., & Hoffmann, P. (2022). High vacuum chemical vapor deposition: high growth rate ALD-like film synthesis and epitaxial CVD for integrated photonics. Presented at the ALD/ALE conference 2022. Ghent.
Room temperature direct electron beam lithography in a condensed copper carboxylate
Berger, L., Jurczyk, J., Madajska, K., Szymańska, I. B., Hoffmann, P., & Utke, I. (2021). Room temperature direct electron beam lithography in a condensed copper carboxylate. Micromachines, 12(5), 580 (14 pp.). https://doi.org/10.3390/mi12050580
Photonic methods for rapid crystallization of LiMn<sub>2</sub>O<sub>4</sub> cathodes for solid-state thin-film batteries
Chen, X., Sastre, J., Rumpel, M., Flegler, A., Singhania, A., Balta Bonner, J., … Romanyuk, Y. E. (2021). Photonic methods for rapid crystallization of LiMn2O4 cathodes for solid-state thin-film batteries. Journal of Power Sources, 495, 229424 (9 pp.). https://doi.org/10.1016/j.jpowsour.2020.229424
Harnessing nano oil reservoir network for generating low friction and wear in self-mating alumina
Rowthu, S., Deshpande, P., Annamalai, A., & Hoffmann, P. (2021). Harnessing nano oil reservoir network for generating low friction and wear in self-mating alumina. Materials and Design, 206, 109821 (13 pp.). https://doi.org/10.1016/j.matdes.2021.109821
Development of high strength aluminum alloys for laser-based additive manufacturing
Schuster, M., Leinenbach, C., & Hoffmann, P. (2021). Development of high strength aluminum alloys for laser-based additive manufacturing. Presented at the EDMX research day 2021. Lausanne, CH.
High vacuum chemical vapor deposition of BaTiO<sub>3</sub> films for integrated photonic devices
Szmyt, W., Geler-Kremer, J., Borzì, A., Abel, S., Fompeyrine, J., & Hoffmann, P. (2021). High vacuum chemical vapor deposition of BaTiO3 films for integrated photonic devices. Presented at the Department day: advanced materials and surfaces. Dübendorf, CH.
High-purity copper structures from a perfluorinated copper carboxylate using focused electron beam induced deposition and post-purification
Berger, L., Jurczyk, J., Madajska, K., Edwards, T. E. J., Szymańska, I., Hoffmann, P., & Utke, I. (2020). High-purity copper structures from a perfluorinated copper carboxylate using focused electron beam induced deposition and post-purification. ACS Applied Electronic Materials, 2(7), 1989-1996. https://doi.org/10.1021/acsaelm.0c00282
Microstructure analysis of epitaxial BaTiO&lt;sub&gt;3&lt;/sub&gt; thin films on SrTiO&lt;sub&gt;3&lt;/sub&gt;-buffered Si: strain and dislocation density quantification using HRXRD methods
Borzì, A., Dolabella, S., Szmyt, W., Geler-Kremer, J., Abel, S., Fompeyrine, J., … Neels, A. (2020). Microstructure analysis of epitaxial BaTiO3 thin films on SrTiO3-buffered Si: strain and dislocation density quantification using HRXRD methods. Materialia, 14, 100953 (9 pp.). https://doi.org/10.1016/j.mtla.2020.100953
3D printing: fabrication of metal matrix composite by laser metal deposition and direct dry injection of nanopowders
Cui, D., Mohanta, A., Leparoux, M., Hoffmann, P., Favre, S., & Tortorici, P. (2020). 3D printing: fabrication of metal matrix composite by laser metal deposition and direct dry injection of nanopowders. Presented at the Medtronic science & technology online conference. Minneapolis, USA.
Impact of oxygen content in powders on the morphology of the laser molten tracks in preparation for additive manufacturing of silicon
Le Dantec, M., Güniat, L., Leistner, M., Figi, R., Bleiner, D., Leparoux, M., & Hoffmann, P. (2020). Impact of oxygen content in powders on the morphology of the laser molten tracks in preparation for additive manufacturing of silicon. Powder Technology, 361, 704-710. https://doi.org/10.1016/j.powtec.2019.11.052
Nanosecond pulsed laser-processing of CVD diamond
Mouhamadali, F., Equis, S., Saeidi, F., Best, J. P., Cantoni, M., Hoffmann, P., & Wasmer, K. (2020). Nanosecond pulsed laser-processing of CVD diamond. Optics and Lasers in Engineering, 126, 105917 (12 pp.). https://doi.org/10.1016/j.optlaseng.2019.105917
Quest project. Direct 3D printing of dissimilar materials
Cui, D., Mohanta, A., Leparoux, M., Hoffmann, P., Favre, S., & Tortorici, P. (2019). Quest project. Direct 3D printing of dissimilar materials. Presented at the Medtronic science & technology conference. Minneapolis, USA.
A novel single-mode microwave assisted synthesis of metal oxide as visible-light photocatalyst
Kato, K., Vaucher, S., Hoffmann, P., Xin, Y., & Shirai, T. (2019). A novel single-mode microwave assisted synthesis of metal oxide as visible-light photocatalyst. Materials Letters, 235(000448000700031), 125-128. https://doi.org/10.1016/j.matlet.2018.09.132
Versatile micro- and nanotexturing techniques for antibacterial applications
Rowthu, S., & Hoffmann, P. (2019). Versatile micro- and nanotexturing techniques for antibacterial applications. In V. Dinca & M. P. Suchea (Eds.), Micro and nano technologies. Functional nanostructured interfaces for environmental and biomedical applications (pp. 27-62). https://doi.org/10.1016/B978-0-12-814401-5.00003-7
Microfabrication of curved sidewall grooves using scanning nanosecond excimer laser ablation
Gong, J., Violakis, G., Infante, D., Hoffmann, P., Kostro, A., & Schüler, A. (2018). Microfabrication of curved sidewall grooves using scanning nanosecond excimer laser ablation. In U. Klotzbach, K. Washio, & R. Kling (Eds.), Proceedings of SPIE: Vol. 10520. Laser-based micro- and nanoprocessing XII (p. 105200Z (8 pp.). https://doi.org/10.1117/12.2286908
Flexural strength evaluations and fractography analyses of slip cast mesoporous submicron alumina
Rowthu, S., Saeidi, F., Wasmer, K., Hoffmann, P., & Kuebler, J. (2018). Flexural strength evaluations and fractography analyses of slip cast mesoporous submicron alumina. Ceramics International, 44(5), 5193-5201. https://doi.org/10.1016/j.ceramint.2017.12.125
Perfluoropolyether-impregnated mesoporous alumina composites overcome the dewetting-tribological properties trade-off
Rowthu, S., & Hoffmann, P. (2018). Perfluoropolyether-impregnated mesoporous alumina composites overcome the dewetting-tribological properties trade-off. ACS Applied Materials and Interfaces, 10(12), 10560-10570. https://doi.org/10.1021/acsami.8b00061
Microstructure and ferroelectricity of BaTiO<SUB>3</SUB> thin films on Si for integrated photonics
Kormondy, K. J., Popoff, Y., Sousa, M., Eltes, F., Caimi, D., Rossell, M. D., … Abel, S. (2017). Microstructure and ferroelectricity of BaTiO3 thin films on Si for integrated photonics. Nanotechnology, 28(7), 075706 (10 pp.). https://doi.org/10.1088/1361-6528/aa53c2
Fabrication of aluminium matrix nanocomposite powders by powder metallurgy
Leparoux, M., Le Dantec, M., Abdulstaar, M., & Hoffmann, P. (2017). Fabrication of aluminium matrix nanocomposite powders by powder metallurgy. Presented at the Alloys for additive manufacturing. Dübendorf, Switzerland.
 

Pages