Active Filters

  • (-) Empa Authors = Kenel, Christoph
  • (-) Journal ≠ Intermetallics
Search Results 1 - 20 of 21
Select Page
Deep learning for<em> in situ </em>and real-time quality monitoring in additive manufacturing using acoustic emission
Shevchik, S. A., Masinelli, G., Kenel, C., Leinenbach, C., & Wasmer, K. (2019). Deep learning for in situ and real-time quality monitoring in additive manufacturing using acoustic emission. IEEE Transactions on Industrial Informatics, 15(9), 5194-5203. https://doi.org/10.1109/TII.2019.2910524
High temperature isothermal oxidation behaviour of an oxide dispersion strengthened derivative of IN625
Arnold, K., Tatlock, G., Kenel, C., Colella, A., & Matteazzi, P. (2018). High temperature isothermal oxidation behaviour of an oxide dispersion strengthened derivative of IN625. Materials at High Temperatures, 35(1-3), 141-150. https://doi.org/10.1080/09603409.2017.1393145
Acoustic emission for in situ quality monitoring in additive manufacturing using spectral convolutional neural networks
Shevchik, S. A., Kenel, C., Leinenbach, C., & Wasmer, K. (2018). Acoustic emission for in situ quality monitoring in additive manufacturing using spectral convolutional neural networks. Additive Manufacturing, 21, 598-604. https://doi.org/10.1016/j.addma.2017.11.012
<i>In situ</i> and real-time monitoring of powder-bed AM by combining acoustic emission and artificial intelligence
Wasmer, K., Kenel, C., Leinenbach, C., & Shevchik, S. A. (2018). In situ and real-time monitoring of powder-bed AM by combining acoustic emission and artificial intelligence. In M. Mebold & C. Klahn (Eds.), Industrializing additive manufacturing - proceedings of additive manufacturing in products and applications - AMPA2017 (pp. 200-209). https://doi.org/10.1007/978-3-319-66866-6_20
3D laser shock peening – a new method for the 3D control of residual stresses in selective laser melting
Kalentics, N., Boillat, E., Peyre, P., Gorny, C., Kenel, C., Leinenbach, C., … Logé, R. E. (2017). 3D laser shock peening – a new method for the 3D control of residual stresses in selective laser melting. Materials and Design, 130, 350-356. https://doi.org/10.1016/j.matdes.2017.05.083
In situ investigation of phase transformations in Ti-6Al-4V under additive manufacturing conditions combining laser melting and high-speed micro-X-ray diffraction
Kenel, C., Grolimund, D., Li, X., Panepucci, E., Samson, V. A., Ferreira Sanchez, D., … Leinenbach, C. (2017). In situ investigation of phase transformations in Ti-6Al-4V under additive manufacturing conditions combining laser melting and high-speed micro-X-ray diffraction. Scientific Reports, 7, 16358 (10 pp.). https://doi.org/10.1038/s41598-017-16760-0
Selective laser melting of an oxide dispersion strengthened (ODS) γ-TiAl alloy towards production of complex structures
Kenel, C., Dasargyri, G., Bauer, T., Colella, A., Spierings, A. B., Leinenbach, C., & Wegener, K. (2017). Selective laser melting of an oxide dispersion strengthened (ODS) γ-TiAl alloy towards production of complex structures. Materials and Design, 134, 81-90. https://doi.org/10.1016/j.matdes.2017.08.034
Integrating fiber Fabry-Perot cavity sensor into 3-D printed metal components for extreme high-temperature monitoring applications
Mathew, J., Hauser, C., Stoll, P., Kenel, C., Polyzos, D., Havermann, D., … Maier, R. R. J. (2017). Integrating fiber Fabry-Perot cavity sensor into 3-D printed metal components for extreme high-temperature monitoring applications. IEEE Sensors Journal, 17(13), 4107-4114. https://doi.org/10.1109/JSEN.2017.2703085
In situ quality monitoring in am using acoustic emission: a machine learning approach
Wasmer, K., Kenel, C., Leinenbach, C., & Shevchik, S. A. (2017). In situ quality monitoring in am using acoustic emission: a machine learning approach (pp. 386-388). Presented at the Materials science and technology (MS&T17). https://doi.org/10.7449/2017/MST_2017_386_388
Combined in situ synchrotron micro X-ray diffraction and high-speed imaging on rapidly heated and solidified Ti–48Al under additive manufacturing conditions
Kenel, C., Grolimund, D., Fife, J. L., Samson, V. A., Van Petegem, S., Van Swygenhoven, H., & Leinenbach, C. (2016). Combined in situ synchrotron micro X-ray diffraction and high-speed imaging on rapidly heated and solidified Ti–48Al under additive manufacturing conditions. Scripta Materialia, 114, 117-120. https://doi.org/10.1016/j.scriptamat.2015.12.009
Development of oxide dispersion strengthened titanium aluminides for additive manufacturing
Kenel, C. (2016). Development of oxide dispersion strengthened titanium aluminides for additive manufacturing [Doctoral dissertation, ETH Zürich]. https://doi.org/10.3929/ethz-a-010860058
In situ synchrotron x-ray diffraction and small angle x-ray scattering studies on rapidly heated and cooled Ti-Al and Al-Cu-Mg alloys using laser-based heating
Kenel, C., Schloth, P., Van Petegem, S., Fife, J. L., Grolimund, D., Menzel, A., … Leinenbach, C. (2016). In situ synchrotron x-ray diffraction and small angle x-ray scattering studies on rapidly heated and cooled Ti-Al and Al-Cu-Mg alloys using laser-based heating. JOM: Journal of the Minerals, Metals and Materials Society, 68(3), 978-984. https://doi.org/10.1007/s11837-015-1774-0
Influence of elastic–plastic base material properties on the fatigue and cyclic deformation behavior of brazed steel joints
Koster, M., Lis, A., Lee, W. J., Kenel, C., & Leinenbach, C. (2016). Influence of elastic–plastic base material properties on the fatigue and cyclic deformation behavior of brazed steel joints. International Journal of Fatigue, 82, 49-59. https://doi.org/10.1016/j.ijfatigue.2015.07.029
Metal-diamond composites processed by selective laser melting
Li, X., Spierings, A. B., Kenel, C., Leinenbach, C., & Wegener, K. (2016). Metal-diamond composites processed by selective laser melting. Presented at the THERMEC 2016 international conference on processing & manufacturing of advanced materials. Processing, fabrication, properties, applications. Graz, Austria.
Characteristics of reactive Ni<sub>3</sub>Sn<sub>4</sub> formation and growth in Ni-Sn interlayer systems
Lis, A., Kenel, C., & Leinenbach, C. (2016). Characteristics of reactive Ni3Sn4 formation and growth in Ni-Sn interlayer systems. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47A(6), 2596-2608. https://doi.org/10.1007/s11661-016-3444-4
Influence of cooling rate on microstructure formation during rapid solidification of binary TiAl alloys
Kenel, C., & Leinenbach, C. (2015). Influence of cooling rate on microstructure formation during rapid solidification of binary TiAl alloys. Journal of Alloys and Compounds, 637, 242-247. https://doi.org/10.1016/j.jallcom.2015.03.016
Processing of metal-diamond-composites using selective laser melting
Spierings, A. B., Leinenbach, C., Kenel, C., & Wegener, K. (2015). Processing of metal-diamond-composites using selective laser melting. Rapid Prototyping Journal, 21(2), 130-136. https://doi.org/10.1108/RPJ-11-2014-0156
Digital image correlation for the characterization of fatigue damage evolution in brazed steel joints
Koster, M., Kenel, C., Lee, W. J., & Leinenbach, C. (2014). Digital image correlation for the characterization of fatigue damage evolution in brazed steel joints. In Z. Zhang, B. Skallerud, C. Thaulow, E. Østby, & J. He (Eds.), Procedia materials science: Vol. 3. 20th European conference on fracture (pp. 1117-1122). https://doi.org/10.1016/j.mspro.2014.06.182
Processing of metal-diamond-composites using selective laser melting
Spierings, A. B., Leinenbach, C., Kenel, C., & Wegener, K. (2014). Processing of metal-diamond-composites using selective laser melting. In Solid freeform fabrication proceedings (pp. 764-774). University of Texas at Austin.
Characterization of the fatigue behavior of brazed steel joints by digital image correlation (DIC)
Koster, M., Kenel, C., & Leinenbach, C. (2013). Characterization of the fatigue behavior of brazed steel joints by digital image correlation (DIC). In Vol. 3. 13th international conference on fracture 2013 (ICF-13) (pp. 1993-2001). Chinese Society of Theoretical and Applied Mechanics.