Active Filters

  • (-) Empa Authors = Mohanty, Gaurav
Search Results 1 - 20 of 45
Select Page
Fiber push-in failure in carbon fiber epoxy composites
Brunner, A. J., Schwiedrzik, J. J., Mohanty, G., & Michler, J. (2020). Fiber push-in failure in carbon fiber epoxy composites. In F. Iacoviello, A. Sedmak, L. Marsavina, B. Blackman, G. A. Ferro, V. Shlyannikov, … L. Banks-Sills (Eds.), Procedia structural integrity: Vol. 28. 1st virtual European conference on fracture - VECF1 (pp. 538-545). https://doi.org/10.1016/j.prostr.2020.10.063
Local mechanical properties at the dendrite scale of Ni-Based superalloys studied by advanced high temperature indentation creep and micropillar compression tests
Haußmann, L., Neumeier, S., Kolb, M., Ast, J., Mohanty, G., Michler, J., & Göken, M. (2020). Local mechanical properties at the dendrite scale of Ni-Based superalloys studied by advanced high temperature indentation creep and micropillar compression tests. In S. Tin, M. Hardy, J. Clews, J. Cormier, Q. Feng, J. Marcin, … A. Suzuki (Eds.), The minerals, metals & materials series. Proceedings of the 14th international symposium on superalloys (pp. 273-281). https://doi.org/10.1007/978-3-030-51834-9_26
An exploratory study on strengthening and thermal stability of magnetron sputtered W nanoparticles at the interface of Cu/Ni multilayer films
Schoeppner, R. L., Mohanty, G., Polyakov, M. N., Petho, L., Maeder, X., & Michler, J. (2020). An exploratory study on strengthening and thermal stability of magnetron sputtered W nanoparticles at the interface of Cu/Ni multilayer films. Materials and Design, 195, 108907 (9 pp.). https://doi.org/10.1016/j.matdes.2020.108907
Novel high temperature vacuum nanoindentation system with active surface referencing and non-contact heating for measurements up to 800 °C
Conte, M., Mohanty, G., Schwiedrzik, J. J., Wheeler, J. M., Bellaton, B., Michler, J., & Randall, N. X. (2019). Novel high temperature vacuum nanoindentation system with active surface referencing and non-contact heating for measurements up to 800 °C. Review of Scientific Instruments, 90(4), 045105 (12 pp.). https://doi.org/10.1063/1.5029873
Deformation of lamellar γ-TiAl below the general yield stress
Edwards, T. E. J., Di Gioacchino, F., Goodfellow, A. J., Mohanty, G., Wehrs, J., Michler, J., & Clegg, W. J. (2019). Deformation of lamellar γ-TiAl below the general yield stress. Acta Materialia, 163, 122-139. https://doi.org/10.1016/j.actamat.2018.09.061
Transverse deformation of a lamellar TiAl alloy at high temperature by <i>in situ</i> microcompression
Edwards, T. E. J., Di Gioacchino, F., Goodfellow, A. J., Mohanty, G., Wehrs, J., Michler, J., & Clegg, W. J. (2019). Transverse deformation of a lamellar TiAl alloy at high temperature by in situ microcompression. Acta Materialia, 166, 85-99. https://doi.org/10.1016/j.actamat.2018.11.050
Microscale fracture of chromia scales
Iyer, A. H. S., Mohanty, G., Stiller, K., Michler, J., & Colliander, M. H. (2019). Microscale fracture of chromia scales. Materialia, 8, 100465 (9 pp.). https://doi.org/10.1016/j.mtla.2019.100465
Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - mechanical machining case
Liao, Z., Polyakov, M., Gavalda Diaz, O., Axinte, D., Mohanty, G., Maeder, X., … Hardy, M. (2019). Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - mechanical machining case. Acta Materialia, 180, 2-14. https://doi.org/10.1016/j.actamat.2019.08.059
High strain rate &lt;em&gt;in situ&lt;/em&gt; testing of silicon micropillars
Pethö, L., Ramachandramoorthy, R., Schwiedrzik, J., Mohanty, G., & Michler, J. (2019). High strain rate in situ testing of silicon micropillars. Presented at the 20th CMi annual review meeting. Lausanne, Switzerland.
Interplay of stresses, plasticity at crack tips and small sample dimensions revealed by in-situ microcantilever tests in tungsten
Ast, J., N. Polyakov, M. N., Mohanty, G., Michler, J., & Maeder, X. (2018). Interplay of stresses, plasticity at crack tips and small sample dimensions revealed by in-situ microcantilever tests in tungsten. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 710, 400-412. https://doi.org/10.1016/j.msea.2017.10.096
Analysis of longitudinal twinning in y-TiAl by microcompression up to 700 °C with strain and crystal orientation mapping
Edwards, T. E. J., Di Gioacchino, F., Mohanty, G., Wehrs, J., Michler, J., & Clegg, W. J. (2018). Analysis of longitudinal twinning in y-TiAl by microcompression up to 700 °C with strain and crystal orientation mapping. Presented at the Gordon research conference on thin film and small scale mechanical behavior. Lewiston, USA.
Deformation of lamellar y-TiAl below the general yield stress
Edwards, T. E. J., Di Gioacchino, F., Goodfellow, A. J., Mohanty, G., Wehrs, J., Michler, J., & Clegg, W. J. (2018). Deformation of lamellar y-TiAl below the general yield stress. Presented at the Indentation 2018. Liège, Belgium.
Longitudinal twinning in a TiAl alloy at high temperature by <i>in situ</i> microcompression
Edwards, T. E., Di Gioacchino, F., Mohanty, G., Wehrs, J., Michler, J., & Clegg, W. J. (2018). Longitudinal twinning in a TiAl alloy at high temperature by in situ microcompression. Acta Materialia, 148, 202-215. https://doi.org/10.1016/j.actamat.2018.01.007
Comparison study of internal stress measured by diffraction mapping and calculation using FEM
Gamcova, J., Milkovič, O., Németh, D., Mohanty, G., Michalik, Š., Wehrs, J., … Franz, H. (2018). Comparison study of internal stress measured by diffraction mapping and calculation using FEM. Key Engineering Materials, 784, 120-123. https://doi.org/10.4028/www.scientific.net/KEM.784.120
Combinatorial deposition techniques enabling fundamental nanomechanic investigations
Pethö, L., Schoeppner, R., Taylor, A., Schwiedrzik, J., Mohanty, G., Chawla, V., … Michler, J. (2018). Combinatorial deposition techniques enabling fundamental nanomechanic investigations. Presented at the Swiss nano convention.
<I>In situ</I> micromechanical testing of tungsten micro-cantilevers using HR-EBSD for the assessment of deformation evolution
Ast, J., Mohanty, G., Guo, Y., Michler, J., & Maeder, X. (2017). In situ micromechanical testing of tungsten micro-cantilevers using HR-EBSD for the assessment of deformation evolution. Materials and Design, 117, 265-266. https://doi.org/10.1016/j.matdes.2016.12.052
Electrodeposition of dilute Ni-W alloy with enhanced thermal stability: accessing nanotwinned to nanocrystalline microstructures
Hasegawa, M., Guillonneau, G., Maeder, X., Mohanty, G., Wehrs, J., Michler, J., & Philippe, L. (2017). Electrodeposition of dilute Ni-W alloy with enhanced thermal stability: accessing nanotwinned to nanocrystalline microstructures. Materials Today Communications, 12, 63-71. https://doi.org/10.1016/j.mtcomm.2017.06.002
In-situ EBSD measurements during micro-cantilever experiments in single crystalline tungsten
Ast, J., Mohanty, G., Michler, J., & Maeder, X. (2016). In-situ EBSD measurements during micro-cantilever experiments in single crystalline tungsten. Presented at the Gordon Research Conference. Lewiston, USA.
Understanding the mechanical behavior of fiber/matrix interfaces during push-in tests by means of finite element simulations and a cohesive zone model
Esqué-de los Ojos, D., Ghisleni, R., Battisti, A., Mohanty, G., Michler, J., Sort, J., & Brunner, A. J. (2016). Understanding the mechanical behavior of fiber/matrix interfaces during push-in tests by means of finite element simulations and a cohesive zone model. Computational Materials Science, 117, 330-337. https://doi.org/10.1016/j.commatsci.2016.02.009
Mapping strain fields induced in Zr-based bulk metallic glasses during <I>in-situ</I> nanoindentation by X-ray nanodiffraction
Gamcová, J., Mohanty, G., Michalik, Š., Wehrs, J., Bednarčík, J., Krywka, C., … Franz, H. (2016). Mapping strain fields induced in Zr-based bulk metallic glasses during in-situ nanoindentation by X-ray nanodiffraction. Applied Physics Letters, 108(3), 031907 (4 pp.). https://doi.org/10.1063/1.4939981