Active Filters

  • (-) Empa Authors = Kishore Babu, Nagumothu
Search Results 1 - 15 of 15
  • RSS Feed
Select Page
Grain refinement of Ti-15V-3Cr-3Sn-3Al metastable β titanium alloy welds using boron-modified fillers
Anis, A. L., Talari, M. K., Kishore Babu, N., Ismail, M. H., Janaki Ram, G. D., & Mohd Arif, I. A. (2018). Grain refinement of Ti-15V-3Cr-3Sn-3Al metastable β titanium alloy welds using boron-modified fillers. Journal of Alloys and Compounds, 749, 320-328. https://doi.org/10.1016/j.jallcom.2018.03.286
Solid state processing of aluminum matrix composites reinforced with nanoparticulate materials
Leparoux, M., Kollo, L., Kwon, H., Kallip, K., Babu, N. K., AlOgab, K., & Talari, M. K. (2018). Solid state processing of aluminum matrix composites reinforced with nanoparticulate materials. Advanced Engineering Materials, 20(11), 1800401 (18 pp.). https://doi.org/10.1002/adem.201800401
Microstructure and mechanical properties of Ti-15-3 alloy gas tungsten arc welds prepared using CP-titanium filler
Anis, A. L., Talari, M. K., Mohd Arif, I. A., Kishore Babu, N., Ismail, M. H., & Janaki Ram, G. D. (2017). Microstructure and mechanical properties of Ti-15-3 alloy gas tungsten arc welds prepared using CP-titanium filler. Transactions of the Indian Institute of Metals, 70(3), 685-690. https://doi.org/10.1007/s12666-017-1049-2
Grain refinement, microstructural and hardness investigation of C added Ti-15-3 alloys prepared by argon arc melting
Arif, I. A. M., Talari, M. K., Anis, A. L., Ismail, M. H., & Kishore Babu, N. (2017). Grain refinement, microstructural and hardness investigation of C added Ti-15-3 alloys prepared by argon arc melting. Transactions of the Indian Institute of Metals, 70(3), 861-865. https://doi.org/10.1007/s12666-017-1048-3
Microstructure and high temperature impression creep properties of Mg–3Ca–xZr (x = 0.3, 0.6, 0.9 wt%) alloys
Darham, W., Anis, A. L., Arif, I. A. M., Kishore Babu, N., Harun, M. K., & Talari, M. K. (2017). Microstructure and high temperature impression creep properties of Mg–3Ca–xZr (x = 0.3, 0.6, 0.9 wt%) alloys. Transactions of the Indian Institute of Metals, 70(3), 649-654. https://doi.org/10.1007/s12666-017-1068-z
Microstructure and mechanical properties of near net shaped aluminium/alumina nanocomposites fabricated by powder metallurgy
Kallip, K., Kishore Babu, N., AlOgab, K. A., Kollo, L., Maeder, X., Arroyo, Y., & Leparoux, M. (2017). Microstructure and mechanical properties of near net shaped aluminium/alumina nanocomposites fabricated by powder metallurgy. Journal of Alloys and Compounds, 714, 133-143. https://doi.org/10.1016/j.jallcom.2017.04.233
High strength Ti-6Al-4V alloy fabricated by high-energy cube milling using calcium as process control agent (PCA) and spark plasma sintering
Kishore Babu, N., Kallip, K., Leparoux, M., AlOgab, K. A., Talari, M. K., & Alqahtani, N. M. (2017). High strength Ti-6Al-4V alloy fabricated by high-energy cube milling using calcium as process control agent (PCA) and spark plasma sintering. International Journal of Advanced Manufacturing Technology, 93(1-4), 445-453. https://doi.org/10.1007/s00170-017-9994-9
Phase evolution during high energy cube milling of Ti–6Al–4V–0.5 vol% TiC powders using heptane and tin as process control agents (PCAs)
Kishore Babu, N., Kallip, K., Leparoux, M., Talari, M. K., AlOgab, K. A., & Alqahtani, N. M. (2017). Phase evolution during high energy cube milling of Ti–6Al–4V–0.5 vol% TiC powders using heptane and tin as process control agents (PCAs). Advanced Engineering Materials, 19(2), 1600662 (6 pp.). https://doi.org/10.1002/adem.201600662
Improving the corrosion properties of magnesium AZ31 alloy GTA weld metal using microarc oxidation process
Siva Prasad, M., Ashfaq, M., Kishore Babu, N., Sreekanth, A., Sivaprasad, K., & Muthupandi, V. (2017). Improving the corrosion properties of magnesium AZ31 alloy GTA weld metal using microarc oxidation process. International Journal of Minerals, Metallurgy, and Materials, 24(5), 566-573. https://doi.org/10.1007/s12613-017-1438-x
Impression creep of Mg-1.5Ca and Mg-3.0Ca alloys
Darham, W., Talari, M. K., Anis, A. L., & Babu, N. K. (2016). Impression creep of Mg-1.5Ca and Mg-3.0Ca alloys. Journal of Engineering and Applied Sciences, 11(12), 2573-2576.
Influence of calcium process control agent (PCA) on Ti-6Al-4V alloy fabricated by high energy ball milling and spark plasma sintering
Kishore Babu, N., Kallip, K., Leparoux, M., AlOgab, K. A., & Talari, M. K. (2016). Influence of calcium process control agent (PCA) on Ti-6Al-4V alloy fabricated by high energy ball milling and spark plasma sintering. Presented at the Material science and engineering conference (MSE). Darmstadt, DE.
Characterization of microstructure and mechanical properties of friction stir welded AlMg5- Al<SUB>2</SUB>O<SUB>3</SUB> nanocomposites
N., K. B., Kallip, K., Leparoux, M., AlOgab, K. A., Reddy, G. M., & Talari, M. K. (2016). Characterization of microstructure and mechanical properties of friction stir welded AlMg5- Al2O3 nanocomposites. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 658, 109-122. https://doi.org/10.1016/j.msea.2016.01.102
Influence of microstructure and strengthening mechanism of AlMg5–Al<SUB>2</SUB>O<SUB>3</SUB> nanocomposites prepared via spark plasma sintering
N., K. B., Kallip, K., Leparoux, M., AlOgab, K. A., Maeder, X., & Arroyo Rojas Dasilva, Y. (2016). Influence of microstructure and strengthening mechanism of AlMg5–Al2O3 nanocomposites prepared via spark plasma sintering. Materials and Design, 95, 534-544. https://doi.org/10.1016/j.matdes.2016.01.138
Microstructure, mechanical, and impression creep properties of AlMg5–0.5 vol% Al<SUB>2</SUB>O<SUB>3</SUB> nanocomposites
Talari, M. K., Babu, N. K., Kallip, K., Leparoux, M., Koller, R. E., AlOgab, K. A., & Maeder, X. (2016). Microstructure, mechanical, and impression creep properties of AlMg5–0.5 vol% Al2O3 nanocomposites. Advanced Engineering Materials, 18(11), 1958-1966. https://doi.org/10.1002/adem.201600301
Influence of frequency and duty cycle on microstructure of plasma electrolytic oxidized AA7075 and the correlation to its corrosion behavior
Arunnellaiappan, T., Nagumothu, K. B., Rama Krishna, L., & Rameshbabu, N. (2015). Influence of frequency and duty cycle on microstructure of plasma electrolytic oxidized AA7075 and the correlation to its corrosion behavior. Surface and Coatings Technology, 280, 136-147. https://doi.org/10.1016/j.surfcoat.2015.08.043