Active Filters

  • (-) Empa Authors = Petho, Laszlo
Search Results 1 - 20 of 55
Select Page
High sensitivity of fluorine gas-assisted FIB-TOF-SIMS for chemical characterization of buried sublayers in thin films
Priebe, A., Pethö, L., Huszar, E., Xie, T., Utke, I., & Michler, J. (2021). High sensitivity of fluorine gas-assisted FIB-TOF-SIMS for chemical characterization of buried sublayers in thin films. ACS Applied Materials and Interfaces, 13(13), 15890-15900. https://doi.org/10.1021/acsami.1c01627
Combinatorial materials design approach to investigate adhesion layer chemistry for optimal interfacial adhesion strength
Schoeppner, R. L., Putz, B., Taylor, A. A., Pethö, L., Thomas, K., Antonin, O., … Michler, J. (2021). Combinatorial materials design approach to investigate adhesion layer chemistry for optimal interfacial adhesion strength. Crystals, 11(4), 357 (17 pp.). https://doi.org/10.3390/cryst11040357
Ultrastrong nanocrystalline binary alloys discovered via high-throughput screening of the CoCr system
Wieczerzak, K., Nowicka, O., Michalski, S., Edwards, T. E. J., Jain, M., Xie, T., … Michler, J. (2021). Ultrastrong nanocrystalline binary alloys discovered via high-throughput screening of the CoCr system. Materials and Design, 205, 109710 (16 pp.). https://doi.org/10.1016/j.matdes.2021.109710
Fracture toughness determination of fused silica by cube corner indentation cracking and pillar splitting
Bruns, S., Petho, L., Minnert, C., Michler, J., & Durst, K. (2020). Fracture toughness determination of fused silica by cube corner indentation cracking and pillar splitting. Materials and Design, 186, 108311 (8 pp.). https://doi.org/10.1016/j.matdes.2019.108311
Achieving micron-scale plasticity and theoretical strength in silicon
Chen, M., Pethö, L., Sologubenko, A. S., Ma, H., Michler, J., Spolenak, R., & Wheeler, J. M. (2020). Achieving micron-scale plasticity and theoretical strength in silicon. Nature Communications, 11(1), 2681 (10 pp.). https://doi.org/10.1038/s41467-020-16384-5
A set of empirical equations describing the observed colours of metal-anodic aluminium oxide-Al nanostructures
Manzano, C. V., Schwiedrzik, J. J., Bürki, G., Pethö, L., Michler, J., & Philippe, L. (2020). A set of empirical equations describing the observed colours of metal-anodic aluminium oxide-Al nanostructures. Beilstein Journal of Nanotechnology, 11, 798-806. https://doi.org/10.3762/bjnano.11.64
Processing and characterization of a multibeam sputtered nanocrystalline CoCrFeNi high-entropy alloy film
Nagy, P., Rohbeck, N., Roussely, G., Sortais, P., Lábár, J. L., Gubicza, J., … Pethö, L. (2020). Processing and characterization of a multibeam sputtered nanocrystalline CoCrFeNi high-entropy alloy film. Surface and Coatings Technology, 386, 125465 (9 pp.). https://doi.org/10.1016/j.surfcoat.2020.125465
Direct co-deposition of mono-sized nanoparticles during sputtering
Polyakov, M. N., Schoeppner, R. L., Pethö, L., Edwards, T. E. J., Thomas, K., Könnyű, B., … Michler, J. (2020). Direct co-deposition of mono-sized nanoparticles during sputtering. Scripta Materialia, 186, 387-391. https://doi.org/10.1016/j.scriptamat.2020.05.032
Elemental characterization of Al nanoparticles buried under a Cu thin film - TOF-SIMS vs. STEM/EDX
Priebe, A., Barnes, J. P., Edwards, T. E. J., Huszár, E., Pethö, L., & Michler, J. (2020). Elemental characterization of Al nanoparticles buried under a Cu thin film - TOF-SIMS vs. STEM/EDX. Analytical Chemistry, 92(18), 12518-12527. https://doi.org/10.1021/acs.analchem.0c02361
Fluorine gas coinjection as a solution for enhancing spatial resolution of time-of-flight secondary ion mass spectrometry and separating mass interference
Priebe, A., Pethö, L., & Michler, J. (2020). Fluorine gas coinjection as a solution for enhancing spatial resolution of time-of-flight secondary ion mass spectrometry and separating mass interference. Analytical Chemistry, 92(2), 2121-2129. https://doi.org/10.1021/acs.analchem.9b04647
Potential of gas-assisted time-of-flight secondary ion mass spectrometry for improving the elemental characterization of complex metal-based systems
Priebe, A., Xie, T., Pethö, L., & Michler, J. (2020). Potential of gas-assisted time-of-flight secondary ion mass spectrometry for improving the elemental characterization of complex metal-based systems. Journal of Analytical Atomic Spectrometry, 35(12), 2997-3006. https://doi.org/10.1039/D0JA00372G
The matrix effect in TOF-SIMS analysis of two-element inorganic thin films
Priebe, A., Xie, T., Bürki, G., Pethö, L., & Johann, M. (2020). The matrix effect in TOF-SIMS analysis of two-element inorganic thin films. Journal of Analytical Atomic Spectrometry, 35(6), 1156 (11 pp.). https://doi.org/10.1039/C9JA00428A
An exploratory study on strengthening and thermal stability of magnetron sputtered W nanoparticles at the interface of Cu/Ni multilayer films
Schoeppner, R. L., Mohanty, G., Polyakov, M. N., Petho, L., Maeder, X., & Michler, J. (2020). An exploratory study on strengthening and thermal stability of magnetron sputtered W nanoparticles at the interface of Cu/Ni multilayer films. Materials and Design, 195, 108907 (9 pp.). https://doi.org/10.1016/j.matdes.2020.108907
Interfacial adhesion of alumina thin films over the full compositional range of ternary fcc alloy films: a combinatorial nanoindentation study
Schoeppner, R., Ferguson, C., Pethö, L., Guerra-Nuñez, C., Taylor, A. A., Polyakov, M., … Michler, J. (2020). Interfacial adhesion of alumina thin films over the full compositional range of ternary fcc alloy films: a combinatorial nanoindentation study. Materials and Design, 193, 108802 (10 pp.). https://doi.org/10.1016/j.matdes.2020.108802
Additive manufacturing by template-assisted 3D electrodeposition: nanocrystalline nickel microsprings and microspring arrays
Schürch, P., Ramachandramoorthy, R., Pethö, L., Michler, J., & Philippe, L. (2020). Additive manufacturing by template-assisted 3D electrodeposition: nanocrystalline nickel microsprings and microspring arrays. Applied Materials Today, 18, 100472 (8 pp.). https://doi.org/10.1016/j.apmt.2019.100472
Synthesis of model Al-Al<sub>2</sub>O<sub>3</sub> multilayer systems with monolayer oxide thickness control by circumventing native oxidation
Xie, T., Edwards, T. E. J., della Ventura, N. M., Casari, D., Huszár, E., Fu, L., … Pethö, L. (2020). Synthesis of model Al-Al2O3 multilayer systems with monolayer oxide thickness control by circumventing native oxidation. Thin Solid Films, 711, 138287 (8 pp.). https://doi.org/10.1016/j.tsf.2020.138287
A self-aligning microtensile setup: application to single-crystal GaAs microscale tension–compression asymmetry
Casari, D., Pethö, L., Schürch, P., Maeder, X., Philippe, L., Michler, J., … Schwiedrzik, J. (2019). A self-aligning microtensile setup: application to single-crystal GaAs microscale tension–compression asymmetry. Journal of Materials Research, 34(14), 2517-2534. https://doi.org/10.1557/jmr.2019.183
High aspect-ratio nanocrystalline CuNi T-structures and micro-gears: synthesis, numerical modeling and characterization
Manzano, C. V., Schürch, P., Pethö, L., Bürki, G., Michler, J., & Philippe, L. (2019). High aspect-ratio nanocrystalline CuNi T-structures and micro-gears: synthesis, numerical modeling and characterization. Journal of the Electrochemical Society, 166(10), E310-E316. https://doi.org/10.1149/2.0961910jes
In-situ mechanical testing of microfabricated micro/nanopillars
Petho, L., Chen, M., Lauener, C. M., Michler, J., & Wheeler, J. M. (2019). In-situ mechanical testing of microfabricated micro/nanopillars. Presented at the 20th CMi annual review meeting. Lausanne, Switzerland.
High strain rate <em>in situ</em> testing of silicon micropillars
Pethö, L., Ramachandramoorthy, R., Schwiedrzik, J., Mohanty, G., & Michler, J. (2019). High strain rate in situ testing of silicon micropillars. Presented at the 20th CMi annual review meeting. Lausanne, Switzerland.