Active Filters

  • (-) Empa Authors = N. Polyakov, Mikhail
  • (-) Empa Authors = Maeder, Xavier
Search Results 1 - 13 of 13
  • RSS Feed
Select Page
Direct co-deposition of mono-sized nanoparticles during sputtering
Polyakov, M. N., Schoeppner, R. L., Pethö, L., Edwards, T. E. J., Thomas, K., Könnyű, B., … Michler, J. (2020). Direct co-deposition of mono-sized nanoparticles during sputtering. Scripta Materialia, 186, 387-391. https://doi.org/10.1016/j.scriptamat.2020.05.032
An exploratory study on strengthening and thermal stability of magnetron sputtered W nanoparticles at the interface of Cu/Ni multilayer films
Schoeppner, R. L., Mohanty, G., Polyakov, M. N., Petho, L., Maeder, X., & Michler, J. (2020). An exploratory study on strengthening and thermal stability of magnetron sputtered W nanoparticles at the interface of Cu/Ni multilayer films. Materials and Design, 195, 108907 (9 pp.). https://doi.org/10.1016/j.matdes.2020.108907
The formation of a homogeneous α-alumina coating on a Ni-based superalloy from a layer stack deposited by cathodic arc evaporation
Ast, J., Balogh-Michels, Z., Döbeli, M., Dommann, A., Gindrat, M., Maeder, X., … Ramm, J. (2019). The formation of a homogeneous α-alumina coating on a Ni-based superalloy from a layer stack deposited by cathodic arc evaporation. Surface and Coatings Technology, 360, 329-334. https://doi.org/10.1016/j.surfcoat.2018.12.089
Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - mechanical machining case
Liao, Z., Polyakov, M., Gavalda Diaz, O., Axinte, D., Mohanty, G., Maeder, X., … Hardy, M. (2019). Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - mechanical machining case. Acta Materialia, 180, 2-14. https://doi.org/10.1016/j.actamat.2019.08.059
Pulsed current-voltage electrodeposition of stoichiometric Bi<sub>2</sub>Te<sub>3</sub> nanowires and their crystallographic characterization by transmission electron backscatter diffraction
Manzano, C. V., Polyakov, M. N., Maiz, J., Aguirre, M. H., Maeder, X., & Martín-González, M. (2019). Pulsed current-voltage electrodeposition of stoichiometric Bi2Te3 nanowires and their crystallographic characterization by transmission electron backscatter diffraction. Science and Technology of Advanced Materials, 20(1), 1022-1030. https://doi.org/10.1080/14686996.2019.1671778
Microstructure-driven strengthening of TiB<sub>2</sub> coatings deposited by pulsed magnetron sputtering
Polyakov, M. N., Morstein, M., Maeder, X., Nelis, T., Lundin, D., Wehrs, J., … Michler, J. (2019). Microstructure-driven strengthening of TiB2 coatings deposited by pulsed magnetron sputtering. Surface and Coatings Technology, 368, 88-96. https://doi.org/10.1016/j.surfcoat.2019.04.042
Interplay of stresses, plasticity at crack tips and small sample dimensions revealed by in-situ microcantilever tests in tungsten
Ast, J., N. Polyakov, M. N., Mohanty, G., Michler, J., & Maeder, X. (2018). Interplay of stresses, plasticity at crack tips and small sample dimensions revealed by in-situ microcantilever tests in tungsten. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 710, 400-412. https://doi.org/10.1016/j.msea.2017.10.096
The brittle-ductile transition of tungsten single crystals at the micro-scale
Ast, J., Schwiedrzik, J. J., Wehrs, J., Frey, D., Polyakov, M. N., Michler, J., & Maeder, X. (2018). The brittle-ductile transition of tungsten single crystals at the micro-scale. Materials and Design, 152, 168-180. https://doi.org/10.1016/j.matdes.2018.04.009
The use of (3D) HR-EBSD to investigate the brittle to ductile transition in single crystal tungsten
Ast, J., Kalácska, S., Schwiedrzik, J., Polyakov, M., Michler, J., & Maeder, X. (2018). The use of (3D) HR-EBSD to investigate the brittle to ductile transition in single crystal tungsten. Presented at the Gordon research conference on thin film and small scale mechanical behavior. Lewiston, USA.
Residual stress and adhesion of thermal spray coatings: microscopic view by solidification and crystallisation analysis in the epitaxial CoNiCrAlY single splat
Fanicchia, F., Maeder, X., Ast, J., Taylor, A. A., Guo, Y., Polyakov, M. N., … Axinte, D. A. (2018). Residual stress and adhesion of thermal spray coatings: microscopic view by solidification and crystallisation analysis in the epitaxial CoNiCrAlY single splat. Materials and Design, 153, 36-46. https://doi.org/10.1016/j.matdes.2018.04.040
Increasing the thermal stability of thin films by incorporating co-sputtered nanoparticles
Pethö, L., Polyakov, M., Schoeppner, R., Thomas, K., Könnyü, B., Maeder, X., & Michler, J. (2018). Increasing the thermal stability of thin films by incorporating co-sputtered nanoparticles. Presented at the 16th international conference on plasma surface engineering. Garmisch-Partenkirchen, Germany.
Synthesis and characterization of superalloy coatings by cathodic arc evaporation
Ast, J., Döbeli, M., Dommann, A., Gindrat, M., Maeder, X., Neels, A., … Ramm, J. (2017). Synthesis and characterization of superalloy coatings by cathodic arc evaporation. Surface and Coatings Technology, 327, 139-145. https://doi.org/10.1016/j.surfcoat.2017.07.061
Interaction of ALD deposited Al<sub>2</sub>0<sub>3</sub> films with remote fluorine plasma
Ruoho, M., Guerra-Nuñez, C., Polyakov, M., Maeder, X., Spring, P., Andreaus, B., & Utke, I. (2017). Interaction of ALD deposited Al203 films with remote fluorine plasma. Presented at the E-MRS fall meeting 2017. Warsaw, Poland: E-MRS.