Active Filters

  • (-) Empa Authors = Schürch, Patrik
Search Results 1 - 13 of 13
  • RSS Feed
Select Page
Effect of high strain rates and temperature on the micromechanical properties of 3D-printed polymer structures made by two-photon lithography
Rohbeck, N., Ramachandramoorthy, R., Casari, D., Schürch, P., Edwards, T. E. J., Schilinsky, L., … Michler, J. (2020). Effect of high strain rates and temperature on the micromechanical properties of 3D-printed polymer structures made by two-photon lithography. Materials and Design, 195, 108977 (9 pp.). https://doi.org/10.1016/j.matdes.2020.108977
Additive manufacturing by template-assisted 3D electrodeposition: nanocrystalline nickel microsprings and microspring arrays
Schürch, P., Ramachandramoorthy, R., Pethö, L., Michler, J., & Philippe, L. (2020). Additive manufacturing by template-assisted 3D electrodeposition: nanocrystalline nickel microsprings and microspring arrays. Applied Materials Today, 18, 100472 (8 pp.). https://doi.org/10.1016/j.apmt.2019.100472
A self-aligning microtensile setup: application to single-crystal GaAs microscale tension–compression asymmetry
Casari, D., Pethö, L., Schürch, P., Maeder, X., Philippe, L., Michler, J., … Schwiedrzik, J. (2019). A self-aligning microtensile setup: application to single-crystal GaAs microscale tension–compression asymmetry. Journal of Materials Research, 34(14), 2517-2534. https://doi.org/10.1557/jmr.2019.183
High aspect-ratio nanocrystalline CuNi T-structures and micro-gears: synthesis, numerical modeling and characterization
Manzano, C. V., Schürch, P., Pethö, L., Bürki, G., Michler, J., & Philippe, L. (2019). High aspect-ratio nanocrystalline CuNi T-structures and micro-gears: synthesis, numerical modeling and characterization. Journal of the Electrochemical Society, 166(10), E310-E316. https://doi.org/10.1149/2.0961910jes
Microtensile testing of brittle materials using custom fabricated self-aligning silicon grippers
Pethö, L., Casari, D., Schürch, P., Maeder, X., Philippe, L., Michler, J., … Schwiedrzik, J. (2019). Microtensile testing of brittle materials using custom fabricated self-aligning silicon grippers. Presented at the 20th CMi annual review meeting. Lausanne, Switzerland.
Design and validation of a testing setup to measure tensile properties of materials at the microscale
Casari, D., Pethö, L., Schürch, P., Philippe, L., Michler, J., Zysset, P., & Schwiedrzik, J. (2018). Design and validation of a testing setup to measure tensile properties of materials at the microscale. Presented at the 2nd EuFN workshop 2018. Grenoble, France.
Tensile properties of bone extracellular matrix at the microscale
Casari, D., Pethö, L., Schürch, P., Brönnimann, R., Philippe, L., Michler, J., … Schwiedrzik, J. (2018). Tensile properties of bone extracellular matrix at the microscale. Presented at the WCB 2018: 8th world congress of biomechanics. Dublin, Ireland.
In situ microtensile testing using custom fabricated silicon grippers
Pethö, L., Casari, D., Schürch, P., Michler, J., Zysset, P., & Schwiedrzik, J. (2018). In situ microtensile testing using custom fabricated silicon grippers. Presented at the 19th CMi annual review meeting. Lausanne.
Towards lightweight materials: Micromechanical test specimen preparation by 2D and 3D microfabrication techniques
Pethö, L., Schürch, P., Mieszala, M., Schwiedrzik, J., Wheeler, J., Philippe, L., & Michler, J. (2018). Towards lightweight materials: Micromechanical test specimen preparation by 2D and 3D microfabrication techniques. Presented at the SWII - additive manufacturing & lightweight technologies 2018. Dübendorf.
Additive manufacturing through galvanoforming of 3D nickel microarchitectures: simulation-assisted synthesis
Schürch, P., Pethö, L., Schwiedrzik, J., Michler, J., & Philippe, L. (2018). Additive manufacturing through galvanoforming of 3D nickel microarchitectures: simulation-assisted synthesis. Advanced Materials Technologies, 3(12), 1800274 (8 pp.). https://doi.org/10.1002/admt.201800274
Electrodeposition of 3D nickel microcomponents: simulation assisted synthesis
Schürch, P., Pethö, L., Schwiedrzik, J., Michler, J., & Philippe, L. (2018). Electrodeposition of 3D nickel microcomponents: simulation assisted synthesis. Presented at the COMSOL conference 2018. Lausanne, Switzerland.
Nanomechanical test specimen preparation techniques by microfabrication and two-photon polymerization to avoid FIB induced implantation damage
Pethö, L., Schürch, P., Mieszala, M., Schwiedrzik, J., Wheeler, J., Philippe, L., & Michler, J. (2017). Nanomechanical test specimen preparation techniques by microfabrication and two-photon polymerization to avoid FIB induced implantation damage. Presented at the Binnig and Rohrer nanotechnology center scientific symposium (BRNC). Zürich, Switzerland.
Nanomechanical test specimen preparation techniques by microfabrication and two-photon polymerization to avoid FIB induced implantation damage
Pethö, L., Schürch, P., Mieszala, M., Schwiedrzik, J., Wheeler, J., Philippe, L., & Michler, J. (2017). Nanomechanical test specimen preparation techniques by microfabrication and two-photon polymerization to avoid FIB induced implantation damage. Presented at the ECI Nanomechanical testing in materials research and development VI. Dubrovnik, Croatia.