Active Filters

  • (-) Empa Authors = Gorjan, Lovro
Search Results 1 - 15 of 15
  • RSS Feed
Select Page
Debinding and sintering of dense ceramic structures made with fused deposition modeling
Clemens, F., Schulz, J., Gorjan, L., Liersch, A., Sebastian, T., & Sarraf, F. (2021). Debinding and sintering of dense ceramic structures made with fused deposition modeling. In M. Meboldt & C. Klahn (Eds.), Industrializing additive manufacturing. Proceedings of AMPA2020 (pp. 293-303). https://doi.org/10.1007/978-3-030-54334-1_21
Millisecond photonic sintering of iron oxide doped alumina ceramic coatings
Gilshtein, E., Pfeiffer, S., Rossell, M. D., Sastre, J., Gorjan, L., Erni, R., … Romanyuk, Y. E. (2021). Millisecond photonic sintering of iron oxide doped alumina ceramic coatings. Scientific Reports, 11(1), 3536 (10 pp.). https://doi.org/10.1038/s41598-021-82896-9
Manufacturing complex Al<sub>2</sub>O<sub>3</sub> ceramic structures using consumer-grade fused deposition modelling printers
Conzelmann, N. A., Gorjan, L., Sarraf, F., Poulikakos, L. D., Partl, M. N., Müller, C. R., & Clemens, F. J. (2020). Manufacturing complex Al2O3 ceramic structures using consumer-grade fused deposition modelling printers. Rapid Prototyping Journal, 26(6), 1035-1048. https://doi.org/10.1108/RPJ-05-2019-0133
Effect of stearic acid on rheological properties and printability of ethylene vinyl acetate based feedstocks for fused filament fabrication of alumina
Gorjan, L., Galusca, C., Sami, M., Sebastian, T., & Clemens, F. (2020). Effect of stearic acid on rheological properties and printability of ethylene vinyl acetate based feedstocks for fused filament fabrication of alumina. Additive Manufacturing, 36, 101391 (9 pp.). https://doi.org/10.1016/j.addma.2020.101391
Synthesis of hydroxyapatite fibers using electrospinning: a study of phase evolution based on polymer matrix
Sebastian, T., Preisker, T. R., Gorjan, L., Graule, T., Aneziris, C. G., & Clemens, F. J. (2020). Synthesis of hydroxyapatite fibers using electrospinning: a study of phase evolution based on polymer matrix. Journal of the European Ceramic Society, 40(6), 2489-2496. https://doi.org/10.1016/j.jeurceramsoc.2020.01.070
Fused deposition modeling of mullite structures from a preceramic polymer and γ-alumina
Gorjan, L., Tonello, R., Sebastian, T., Colombo, P., & Clemens, F. (2019). Fused deposition modeling of mullite structures from a preceramic polymer and γ-alumina. Journal of the European Ceramic Society, 39(7), 2463-2471. https://doi.org/10.1016/j.jeurceramsoc.2019.02.032
Thermoplastic processing and debinding behavior of NbC-M2 high speed steel cemented carbide
Hadian, A., Zamani, C., Gorjan, L., & Clemens, F. J. (2019). Thermoplastic processing and debinding behavior of NbC-M2 high speed steel cemented carbide. Journal of Materials Processing Technology, 263, 91-100. https://doi.org/10.1016/j.jmatprotec.2018.08.006
Ethanolamine-assisted low-temperature crystallization of hydroxide nanoparticle ink into transparent and conductive ITO layers
Liu, Y., Moser, T., Andres, C., Gorjan, L., Remhof, A., Clemens, F., … Romanyuk, Y. E. (2019). Ethanolamine-assisted low-temperature crystallization of hydroxide nanoparticle ink into transparent and conductive ITO layers. Journal of Materials Chemistry A, 7(7), 3083-3089. https://doi.org/10.1039/C8TA09891C
Ethylene vinyl acetate as a binder for additive manufacturing of tricalcium phosphate bio-ceramics
Gorjan, L., Reiff, L., Liersch, A., & Clemens, F. (2018). Ethylene vinyl acetate as a binder for additive manufacturing of tricalcium phosphate bio-ceramics. Ceramics International, 44(13), 15817-15823. https://doi.org/10.1016/j.ceramint.2018.05.260
Effect of polymer-ceramic fibre interphase design on coupling factor in low fibre volume content piezoelectric composites
Lusiola, T., Oberle, S., Gorjan, L., & Clemens, F. (2018). Effect of polymer-ceramic fibre interphase design on coupling factor in low fibre volume content piezoelectric composites. Advances in Materials Science and Engineering, 2018, 6465783 (8 pp.). https://doi.org/10.1155/2018/6465783
Preparation and characterization of potassium sodium niobate nanofibers by electrospinning
Lusiola, T., Gorjan, L., & Clemens, F. (2018). Preparation and characterization of potassium sodium niobate nanofibers by electrospinning. International Journal of Applied Ceramic Technology, 15(5), 1292-1300. https://doi.org/10.1111/ijac.12883
Kinetics and equilibrium of eco-debinding of PZT ceramics shaped by thermoplastic extrusion
Gorjan, L., Lusiola, T., Scharf, D., & Clemens, F. (2017). Kinetics and equilibrium of eco-debinding of PZT ceramics shaped by thermoplastic extrusion. Journal of the European Ceramic Society, 37, 5273-5280. https://doi.org/10.1016/j.jeurceramsoc.2017.04.063
Ceramic protection plates brazed to aluminum brake discs
Gorjan, L., Boretius, M., Blugan, G., Gili, F., Mangherini, D., Lizarralde, X., … Kuebler, J. (2016). Ceramic protection plates brazed to aluminum brake discs. Ceramics International, 42(14), 15739-15746. https://doi.org/10.1016/j.ceramint.2016.07.035
Effectiveness of wick-debinding inside powder bed for ceramic laminates made by tape casting
Gorjan, L., Blugan, G., Graule, T., & Kuebler, J. (2015). Effectiveness of wick-debinding inside powder bed for ceramic laminates made by tape casting. Powder Technology, 273, 197-202. https://doi.org/10.1016/j.powtec.2014.12.049
Fracture behavior of soldered Al<SUB>2</SUB>O<SUB>3</SUB> ceramic to A356 aluminum alloy and resistance of the joint to low temperature exposure
Gorjan, L., Blugan, G., Boretius, M., De La Pierre, S., Ferraris, M., Casalegno, V., … Kuebler, J. (2015). Fracture behavior of soldered Al2O3 ceramic to A356 aluminum alloy and resistance of the joint to low temperature exposure. Materials and Design, 88, 889-896. https://doi.org/10.1016/j.matdes.2015.09.067