Active Filters

  • (-) Empa Laboratories = 405 Transport at Nanoscale Interfaces
  • (-) Publication Year = 2006 - 2019
  • (-) Empa Authors ≠ Jerjen, Iwan
  • (-) Empa Laboratories ≠ 504 Automotive Powertrain Technologies
  • (-) Empa Laboratories = 303 Structural Engineering
Search Results 1 - 15 of 15
  • RSS Feed
Select Page
Experimental investigation of friction stresses between adjacent panels made of Oriented Strand Board (OSB) and between OSB panels and glued laminated timber (GLT) frame members
Steiger, R., Fink, G., Nerbano, S., Hack, E., & Beyer, K. (2018). Experimental investigation of friction stresses between adjacent panels made of Oriented Strand Board (OSB) and between OSB panels and glued laminated timber (GLT) frame members. Materials and Structures, 51, 2 (14 pp.). https://doi.org/10.1617/s11527-017-1124-5
Carbon fiber reinforced composites proved to be very successful in construction during a quarter of a century
Meier, U., Brönnimann, R., Anderegg, P., Terrasi, G. P., Motavalli, M., & Czaderski, C. (2016). Carbon fiber reinforced composites proved to be very successful in construction during a quarter of a century (p. (8 pp.). Presented at the ECCM17 - 17th European conference on composite materials. .
Iron-based shape memory alloys (Fe-SMA) - a new material for prestressing concrete structures
Czaderski, C., Weber, B., Shahverdi, M., Motavalli, M., Leinenbach, C., Lee, W., … Michels, J. (2015). Iron-based shape memory alloys (Fe-SMA) - a new material for prestressing concrete structures. In A. Ilki, M. Motavalli, P. Inci, & M. Köhli (Eds.), Proceedings of SMAR 2015 the 3rd conference on smart monitoring, assessment and rehabilitation of civil structures (p. (12 pp.). ITU; Empa.
Feasibility of iron-based shape memory alloy strips for prestressed strengthening of concrete structures
Czaderski, C., Shahverdi, M., Brönnimann, R., Leinenbach, C., & Motavalli, M. (2014). Feasibility of iron-based shape memory alloy strips for prestressed strengthening of concrete structures. Construction and Building Materials, 56, 94-105. https://doi.org/10.1016/j.conbuildmat.2014.01.069
Delamination detection in a 90-year-old glulam block with scanning dry point-contact ultrasound
Neuenschwander, J., Sanabria, S. J., Schuetz, P., Widmann, R., & Vogel, M. (2013). Delamination detection in a 90-year-old glulam block with scanning dry point-contact ultrasound. Holzforschung, 67(8), 949-957. https://doi.org/10.1515/hf-2012-0202
Novel air-coupled ultrasound method for climatic-induced delamination imaging in individual bonding planes of historic glued timber
Sanabria, S. J., Schütz, P., Neuenschwander, J., Widmann, R., & Niemz, P. (2013). Novel air-coupled ultrasound method for climatic-induced delamination imaging in individual bonding planes of historic glued timber (pp. 594-601). Presented at the 18th international nondestructive testing and evaluation of wood symposium. .
Gradient anchorage method for prestressed CFRP strips – principle and application
Michels, J., Czaderski, C., Brönnimann, R., & Motavalli, M. (2012). Gradient anchorage method for prestressed CFRP strips – principle and application. In F. Biondini & D. M. Frangopol (Eds.), Bridge maintenance, safety, management, resilience and sustainability (pp. 1981-1986). Taylor & Francis.
Temporary bond strength of partly cured epoxy adhesive for anchoring prestressed CFRP strips on concrete
Michels, J., Czaderski, C., El-Hacha, R., Brönnimann, R., & Motavalli, M. (2012). Temporary bond strength of partly cured epoxy adhesive for anchoring prestressed CFRP strips on concrete. Composite Structures, 94(9), 2667-2676. https://doi.org/10.1016/j.compstruct.2012.03.037
Electrostatic modification of the bending stiffness of adaptive structures
Bergamini, A. (2009). Electrostatic modification of the bending stiffness of adaptive structures [Doctoral dissertation, ETH Zürich]. https://doi.org/10.3929/ethz-a-005774538
Comparison of measured and calculated interfacial strains at CFRP plate end
Schumacher, A., & Hack, E. (2008). Comparison of measured and calculated interfacial strains at CFRP plate end. In M. Motavalli (Ed.), FRP composites in civil engineering. Proceedings of the 4th international conference on FRP composites in civil engineering (p. (6 pp.). International Institute for FRP in Construction (IIFC).
Flexural strengthening of beams using externally bonded plates: advanced optical measurements at the beam-to-plate interface
Schumacher, A., Czaderski, C., Hack, E., & Motavalli, M. (2008). Flexural strengthening of beams using externally bonded plates: advanced optical measurements at the beam-to-plate interface. In IABSE congress reports. 17th IABSE congress: creating and renewing urban structures – tall buildings, bridges and infrastructure (p. (9 pp.). International association for bridge and structural engineering (IABSE).
Stable debonding at discontinuity
Czaderski, C., Hack, E., Aram, M. R., & Motavalli, M. (2007). Stable debonding at discontinuity. In T. Triantafillou (Ed.), Fiber-reinforced polymer reinforcement for concrete structures: proceedings of the 8th international symposium on fiber-reinforced polymer reinforcement for concrete structures (FRPRCS-8) (p. (10 pp.). University of Patras.
DSPI strain measurement on an externally reinforced bending beam: a comparison of step-by-step addition and pixel shift correlation
Hack, E., & Schumacher, A. (2007). DSPI strain measurement on an externally reinforced bending beam: a comparison of step-by-step addition and pixel shift correlation. Optics and Lasers in Engineering, 45(5), 589-595. https://doi.org/10.1016/j.optlaseng.2006.08.003
ESPI measurements of strain on a CFRP-reinforced bending beam
Hack, E., & Schumacher, A. (2007). ESPI measurements of strain on a CFRP-reinforced bending beam. Strain, 43(3), 235-239. https://doi.org/10.1111/j.1475-1305.2007.00339.x
ESPI-measurement of a strain gradients in a CFRP-reinforced bending beam
Hack, E., & Schumacher, A. (2006). ESPI-measurement of a strain gradients in a CFRP-reinforced bending beam (p. (2 pp.). Presented at the Photomechanics 2006, international conference on full-field measurement techniques and their applications in experimental solid mechanics. .