Active Filters

  • (-) Empa Laboratories = 201 High Performance Ceramics
  • (-) Publication Year = 2006 - 2019
  • (-) Keywords ≠ PZT
  • (-) Empa Laboratories ≠ 308 Concrete and Asphalt
  • (-) Empa Authors = Clemens, Frank J.
Search Results 1 - 20 of 106

Pages

  • RSS Feed
Select Page
FDM Keramikdruck: Herstellung von keramischen Strukturen mit Hilfe von kommerziellen Filamentdruckern
Clemens, F. J. (2019). FDM Keramikdruck: Herstellung von keramischen Strukturen mit Hilfe von kommerziellen Filamentdruckern. Keramische Zeitschrift, 71(5), 40-44. https://doi.org/10.1007/s42410-019-0055-x
Fused deposition modeling of mullite structures from a preceramic polymer and γ-alumina
Gorjan, L., Tonello, R., Sebastian, T., Colombo, P., & Clemens, F. (2019). Fused deposition modeling of mullite structures from a preceramic polymer and γ-alumina. Journal of the European Ceramic Society, 39(7), 2463-2471. https://doi.org/10.1016/j.jeurceramsoc.2019.02.032
Sintering behavior of NbC based cemented carbides bonded with M2 high speed steel
Hadian, A., Zamani, C., & Clemens, F. J. (2019). Sintering behavior of NbC based cemented carbides bonded with M2 high speed steel. Ceramics International, 45(7), 8616-8625. https://doi.org/10.1016/j.ceramint.2019.01.181
Thermoplastic processing and debinding behavior of NbC-M2 high speed steel cemented carbide
Hadian, A., Zamani, C., Gorjan, L., & Clemens, F. J. (2019). Thermoplastic processing and debinding behavior of NbC-M2 high speed steel cemented carbide. Journal of Materials Processing Technology, 263, 91-100. https://doi.org/10.1016/j.jmatprotec.2018.08.006
Draw-spun, photonically annealed Ag fibers as alternative electrodes for flexible CIGS solar cells
Liu, Y., Zeder, S., Lin, S., Carron, R., Grossmann, G., Bolat, S., … Romanyuk, Y. E. (2019). Draw-spun, photonically annealed Ag fibers as alternative electrodes for flexible CIGS solar cells. Science and Technology of Advanced Materials, 20(1), 26-34. https://doi.org/10.1080/14686996.2018.1552480
Ethanolamine-assisted low-temperature crystallization of hydroxide nanoparticle ink into transparent and conductive ITO layers
Liu, Y., Moser, T., Andres, C., Gorjan, L., Remhof, A., Clemens, F., … Romanyuk, Y. E. (2019). Ethanolamine-assisted low-temperature crystallization of hydroxide nanoparticle ink into transparent and conductive ITO layers. Journal of Materials Chemistry A, 7(7), 3083-3089. https://doi.org/10.1039/C8TA09891C
Kinetics of crystallization in 13.2Li<sub>2</sub>O-67.6SiO<sub>2</sub>-14.49Al<sub>2</sub>O<sub>3</sub>-3.3TiO<sub>2</sub>-0.4BaO-0.97ZnO glass ceramic powder: Part I: a model-free vs. model-fitting approach
Savabieh, H., Alizadeh, P., Nayebi, B., & Clemens, F. J. (2019). Kinetics of crystallization in 13.2Li2O-67.6SiO2-14.49Al2O3-3.3TiO2-0.4BaO-0.97ZnO glass ceramic powder: Part I: a model-free vs. model-fitting approach. Ceramics International, 45(7), 8856-8865. https://doi.org/10.1016/j.ceramint.2019.01.214
Enhancing dielectric properties of barium titanate macrofibers
Sebastian, T., Michalek, A., Hedayati, M., Lusiola, T., & Clemens, F. (2019). Enhancing dielectric properties of barium titanate macrofibers. Journal of the European Ceramic Society, 39(13), 3716-3721. https://doi.org/10.1016/j.jeurceramsoc.2019.05.040
Facile synthesis by peroxide method and microwave-assisted hydrothermal treatment of TiO<sub>2</sub> with high photocatalytic efficiency for dye degradation and hydrogen production
Garcia, A. P., Guaglianoni, W. C., Garcia, D. R., Soares, L. G., de Oliveira Vaz, M., Teixeira, S. R., … Bergmann, C. P. (2018). Facile synthesis by peroxide method and microwave-assisted hydrothermal treatment of TiO2 with high photocatalytic efficiency for dye degradation and hydrogen production. Chemistry Select, 3(41), 11454-11459. https://doi.org/10.1002/slct.201802188
Ethylene vinyl acetate as a binder for additive manufacturing of tricalcium phosphate bio-ceramics
Gorjan, L., Reiff, L., Liersch, A., & Clemens, F. (2018). Ethylene vinyl acetate as a binder for additive manufacturing of tricalcium phosphate bio-ceramics. Ceramics International, 44(13), 15817-15823. https://doi.org/10.1016/j.ceramint.2018.05.260
Effect of sintering temperature on microstructural evolution of M48 high speed tool steel bonded NbC matrix cemented carbides sintered in inert atmosphere
Hadian, A., Zamani, C., & Clemens, F. J. (2018). Effect of sintering temperature on microstructural evolution of M48 high speed tool steel bonded NbC matrix cemented carbides sintered in inert atmosphere. International Journal of Refractory Metals and Hard Materials, 74, 20-27. https://doi.org/10.1016/j.ijrmhm.2018.02.021
Dielectric relaxation of Bi<sub>4</sub>Ti<sub>3</sub>O<sub>12</sub> ceramics prepared by the low-temperature combustion synthesis
Kozielski, L., Płońska, M., Sebastian, T., & Clemens, F. (2018). Dielectric relaxation of Bi4Ti3O12 ceramics prepared by the low-temperature combustion synthesis. Phase Transitions, 91(9-10), 1081-1091. https://doi.org/10.1080/01411594.2018.1507033
Effect of polymer-ceramic fibre interphase design on coupling factor in low fibre volume content piezoelectric composites
Lusiola, T., Oberle, S., Gorjan, L., & Clemens, F. (2018). Effect of polymer-ceramic fibre interphase design on coupling factor in low fibre volume content piezoelectric composites. Advances in Materials Science and Engineering, 2018, 6465783 (8 pp.). https://doi.org/10.1155/2018/6465783
Preparation and characterization of potassium sodium niobate nanofibers by electrospinning
Lusiola, T., Gorjan, L., & Clemens, F. (2018). Preparation and characterization of potassium sodium niobate nanofibers by electrospinning. International Journal of Applied Ceramic Technology, 15(5), 1292-1300. https://doi.org/10.1111/ijac.12883
Mechanical properties of zirconia core-shell rods with porous core and dense shell prepared by thermoplastic co-extrusion
Kastyl, J., Chlup, Z., Clemens, F., & Trunec, M. (2017). Mechanical properties of zirconia core-shell rods with porous core and dense shell prepared by thermoplastic co-extrusion. Journal of the European Ceramic Society, 37, 2439-2447. https://doi.org/10.1016/j.jeurceramsoc.2017.02.006
Piezoresistive carbon-based hybrid sensor for body-mounted biomedical applications
Melnykowycz, M., Tschudin, M., & Clemens, F. (2017). Piezoresistive carbon-based hybrid sensor for body-mounted biomedical applications. In IOP conference series: materials science and engineering: Vol. 175. 4th international conference on competitive materials and technology processes (IC-CMTP4) (p. 012006 (6 pp.). https://doi.org/10.1088/1757-899X/175/1/012006
Soft condensed matter hybrid fiber sensors for vital function monitoring
Melnykowycz, M., Tschudin, M., Selle, R., Maynard, K. R., Richards-Kortum, R. R., Oden, Z. M., & Clemens, F. J. (2017). Soft condensed matter hybrid fiber sensors for vital function monitoring. P. Vincenzini (Ed.), Advances in science and technology: Vol. 100. (pp. 79-84). Presented at the 7th forum on new materials - part D. https://doi.org/10.4028/www.scientific.net/AST.100.79
Synthesis of BaTiO<sub>3</sub> Nanofibers and their influence on the properties of BaTiO<sub>3</sub> based composite fibers
Michalek, A. (2017). Synthesis of BaTiO3 Nanofibers and their influence on the properties of BaTiO3 based composite fibers [Bachelor thesis].
Investigation of dielectric properties and microstructure of sintered 13·2Li<SUB>2</SUB>O − 67·6SiO<SUB>2</SUB> − 14.49Al<SUB>2</SUB>O<SUB>3</SUB> − 3·3TiO<SUB>2</SUB> − 0.4BaO − 0.97ZnO glass-ceramics
Savabieh, H., Alizadeh, P., Arroyo Rojas Dasilva, Y., Erni, R., & Clemens, F. J. (2017). Investigation of dielectric properties and microstructure of sintered 13·2Li2O − 67·6SiO2 − 14.49Al2O3 − 3·3TiO2 − 0.4BaO − 0.97ZnO glass-ceramics. Journal of the European Ceramic Society, 37(2), 631-639. https://doi.org/10.1016/j.jeurceramsoc.2016.09.009
Development of granular materials for fluidized bed process: measuring attrition resistance with a horizontal ball milling device and its mathematical description
Debras, C., Liu, Y., van Garderen, N., Minisini, B., Graule, T., & Clemens, F. J. (2016). Development of granular materials for fluidized bed process: measuring attrition resistance with a horizontal ball milling device and its mathematical description. Powder Technology, 288, 157-163. https://doi.org/10.1016/j.powtec.2015.10.047
 

Pages