Active Filters

  • (-) Empa Authors = Michler, Johann
Search Results 1 - 20 of 496

Pages

  • CSV Spreadsheet
  • Excel Spreadsheet
  • RSS Feed
Select Page
An in situ and ex situ study of χ phase formation in a hypoeutectic Fe-based hardfacing alloy
Wieczerzak, K., Michler, J., Wheeler, J. M., Lech, S., Chulist, R., Gondek, Ł., … Bała, P. (2020). An in situ and ex situ study of χ phase formation in a hypoeutectic Fe-based hardfacing alloy. Materials and Design, 188, 108438 (14 pp.). https://doi.org/10.1016/j.matdes.2019.108438
Fluorine gas coinjection as a solution for enhancing spatial resolution of time-of-flight secondary ion mass spectrometry and separating mass interference
Priebe, A., Pethö, L., & Michler, J. (2020). Fluorine gas coinjection as a solution for enhancing spatial resolution of time-of-flight secondary ion mass spectrometry and separating mass interference. Analytical Chemistry. https://doi.org/10.1021/acs.analchem.9b04647
Influence of helium ion irradiation on the structure and strength of diamond
Chen, M., Best, J. P., Shorubalko, I., Michler, J., Spolenak, R., & Wheeler, J. M. (2019). Influence of helium ion irradiation on the structure and strength of diamond. Carbon. https://doi.org/10.1016/j.carbon.2019.10.078
Fracture toughness determination of fused silica by cube corner indentation cracking and pillar splitting
Bruns, S., Petho, L., Minnert, C., Michler, J., & Durst, K. (2020). Fracture toughness determination of fused silica by cube corner indentation cracking and pillar splitting. Materials and Design, 186, 108311 (8 pp.). https://doi.org/10.1016/j.matdes.2019.108311
Polarized raman spectroscopy as a method for quantitative analysis of bone fibril orientation
Kochetkova, T., Braun, O., Overbeck, J., Peruzzi, C., Maurya, A., Michler, J., … Schwiedrzik, J. (2019). Polarized raman spectroscopy as a method for quantitative analysis of bone fibril orientation. Presented at the Empa PhD students' symposium. St. Gallen, Switzerland.
Dynamic compressive strength of hydrated lamellar bone at the microscale
Peruzzi, C., Michler, J., Mazza, E., & Schwiedrzik, J. (2019). Dynamic compressive strength of hydrated lamellar bone at the microscale. Presented at the MRS Fall meeting conference location. Boston, USA.
Dynamic compressive strength of hydrated lamellar bone at the microscale
Peruzzi, C., Michler, J., Mazza, E., & Schwiedrzik, J. (2019). Dynamic compressive strength of hydrated lamellar bone at the microscale. Presented at the Empa PhD students' symposium. St. Gallen, Switzerland.
Aluminum-assisted densification of cosputtered lithium garnet electrolyte films for solid-state batteries
Sastre, J., Lin, T. Y., Filippin, A. N., Priebe, A., Avancini, E., Michler, J., … Buecheler, S. (2019). Aluminum-assisted densification of cosputtered lithium garnet electrolyte films for solid-state batteries. ACS Applied Energy Materials. https://doi.org/10.1021/acsaem.9b01387
Lung-alveoli-on-chip: mechanical characterization of a new biological membrane
Thoma, G., Zamprogno, P. G. V., Ferrari, D., Putz, B., Michler, J., & Guenat, O. T. (2019). Lung-alveoli-on-chip: mechanical characterization of a new biological membrane. Presented at the Day of biomedical research. Bern, Switzerland.
Additive manufacturing by template-assisted 3D electrodeposition: nanocrystalline nickel microsprings and microspring arrays
Schürch, P., Ramachandramoorthy, R., Pethö, L., Michler, J., & Philippe, L. (2019). Additive manufacturing by template-assisted 3D electrodeposition: nanocrystalline nickel microsprings and microspring arrays. Applied Materials Today. https://doi.org/10.1016/j.apmt.2019.100472
Micro-mechanical testing of ceramic matrix composites, extraction of interface properties and impact on composite optimization
Kabel, J., Parkison, D., Edwards, T., Michler, J., & Hosemann, P. (2019). Micro-mechanical testing of ceramic matrix composites, extraction of interface properties and impact on composite optimization. Presented at the ECI Nanomechanical testing in materials research and development VII. Malaga, Spain.
Simultaneous gas co-injection during a FIB-TOF-SIMS measurement as a solution for enhancing spatial resolution and de-coupling mass interference
Priebe, A., Utke, I., Pethö, L., & Michler, J. (2019). Simultaneous gas co-injection during a FIB-TOF-SIMS measurement as a solution for enhancing spatial resolution and de-coupling mass interference. Presented at the 22nd International conference on secondary ion mass spectrometry – SIMS-22. Kyoto, Japan.
Exploring bone's basic building blocks microtensile properties and toughening mechanisms on the lamellar level
Casari, D., Michler, J., Zysset, P., & Schwiedrzik, J. (2019). Exploring bone's basic building blocks microtensile properties and toughening mechanisms on the lamellar level. Presented at the Nanomechanical testing in materials research and development VII. Malaga, Spain.
Investigation of geometrically necessary dislocation structures in compressed Cu micropillars by 3-dimensional HR-EBSD
Kalácska, S., Dankházi, Z., Zilahi, G., Maeder, X., Michler, J., Ispánovity, P. D., & Groma, I. (2020). Investigation of geometrically necessary dislocation structures in compressed Cu micropillars by 3-dimensional HR-EBSD. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 770, 138499 (10 pp.). https://doi.org/10.1016/j.msea.2019.138499
Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - mechanical machining case
Liao, Z., Polyakov, M., Gavalda Diaz, O., Axinte, D., Mohanty, G., Maeder, X., … Hardy, M. (2019). Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - mechanical machining case. Acta Materialia, 180, 2-14. https://doi.org/10.1016/j.actamat.2019.08.059
Relating fracture toughness to micro-pillar compression response for a laser powder bed additive manufactured bulk metallic glass
Best, J. P., Ast, J., Li, B., Stolpe, M., Busch, R., Yang, F., … Kruzic, J. J. (2020). Relating fracture toughness to micro-pillar compression response for a laser powder bed additive manufactured bulk metallic glass. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 770, 138535 (8 pp.). https://doi.org/10.1016/j.msea.2019.138535
Determination of the true projected contact area by in situ indentation testing
Guillonneau, G., Wheeler, J. M., Wehrs, J., Philippe, L., Baral, P., Höppel, H. W., … Michler, J. (2019). Determination of the true projected contact area by in situ indentation testing. Journal of Materials Research, 34(16), 2859-2868. https://doi.org/10.1557/jmr.2019.236
Microscale fracture of chromia scales
Iyer, A. H. S., Mohanty, G., Stiller, K., Michler, J., & Colliander, M. H. (2019). Microscale fracture of chromia scales. Materialia, 8, 100465 (9 pp.). https://doi.org/10.1016/j.mtla.2019.100465
Highly reduced ecotoxicity of ZnO-based micro/nanostructures on aquatic biota: influence of architecture, chemical composition, fixation, and photocatalytic efficiency
Serrà, A., Zhang, Y., Sepúlveda, B., Gómez, E., Nogués, J., Michler, J., & Philippe, L. (2020). Highly reduced ecotoxicity of ZnO-based micro/nanostructures on aquatic biota: influence of architecture, chemical composition, fixation, and photocatalytic efficiency. Water Research, 169, 115210 (12 pp.). https://doi.org/10.1016/j.watres.2019.115210
The effect of dislocation nature on the size effect in Indium Antimonide above and below the brittle-ductile transition
Wheeler, J. M., Thilly, L., Zou, Y., Morel, A., Raghavan, R., & Michler, J. (2019). The effect of dislocation nature on the size effect in Indium Antimonide above and below the brittle-ductile transition. MRS Advances, (8 pp.). https://doi.org/10.1557/adv.2019.369
 

Pages