Active Filters

  • (-) Full Text ≠ Open Access
  • (-) Journal = Acta Materialia
Search Results 1 - 20 of 73

Pages

  • RSS Feed
Select Page
A further insight into spherical indentation: ring crack formation in a brittle La<SUB>0.8</SUB>Sr<SUB>0.2</SUB>Ga<SUB>0.8</SUB>Mg<SUB>0.2</SUB>O<SUB>3</SUB> perovskite
Lugovy, M., Slyunyayev, V., Yarmolenko, S., Sankar, J., Graule, T., Kuebler, J., … Orlovskaya, N. (2011). A further insight into spherical indentation: ring crack formation in a brittle La0.8Sr0.2Ga0.8Mg0.2O3 perovskite. Acta Materialia, 59(11), 4425-4436. https://doi.org/10.1016/j.actamat.2011.03.066
Apparent fracture toughness of Si<sub>3</sub>N<sub>4</sub>-based laminates with residual compressive or tensile stresses in surface layers
Lugovy, M., Slyunyayev, V., Orlovskaya, N., Blugan, G., Kuebler, J., & Lewis, M. (2005). Apparent fracture toughness of Si3N4-based laminates with residual compressive or tensile stresses in surface layers. Acta Materialia, 53(2), 289-296. https://doi.org/10.1016/j.actamat.2004.09.022
Atomic-scale structural characterization of grain boundaries in epitaxial Ge/Si microcrystals by HAADF-STEM
Arroyo Rojas Dasilva, Y., Erni, R., Isa, F., Isella, G., von Känel, H., Gröning, P., & Rossell, M. D. (2019). Atomic-scale structural characterization of grain boundaries in epitaxial Ge/Si microcrystals by HAADF-STEM. Acta Materialia, 167, 159-166. https://doi.org/10.1016/j.actamat.2019.01.031
Cohesive and adhesive failure of hard and brittle films on ductile metallic substrates: a film thickness size effect analysis of the model system hydrogenated diamond-like carbon (a-C:H) on Ti substrates
Bernoulli, D., Häfliger, K., Thorwarth, K., Thorwarth, G., Hauert, R., & Spolenak, R. (2015). Cohesive and adhesive failure of hard and brittle films on ductile metallic substrates: a film thickness size effect analysis of the model system hydrogenated diamond-like carbon (a-C:H) on Ti substrates. Acta Materialia, 83, 29-36. https://doi.org/10.1016/j.actamat.2014.09.044
Comparing small scale plasticity of copper-chromium nanolayered and alloyed thin films at elevated temperatures
Raghavan, R., Harzer, T. P., Chawla, V., Djaziri, S., Phillipi, B., Wehrs, J., … Dehm, G. (2015). Comparing small scale plasticity of copper-chromium nanolayered and alloyed thin films at elevated temperatures. Acta Materialia, 93, 175-186. https://doi.org/10.1016/j.actamat.2015.04.008
Composition and automated crystal orientation mapping of rapid solidification products in hypoeutectic Al-4 at.%Cu alloys
Zweiacker, K. W., Liu, C., Gordillo, M. A., McKeown, J. T., Campbell, G. H., & Wiezorek, J. M. K. (2018). Composition and automated crystal orientation mapping of rapid solidification products in hypoeutectic Al-4 at.%Cu alloys. Acta Materialia, 145, 71-83. https://doi.org/10.1016/j.actamat.2017.11.040
Crystal structure, morphology and physical properties of LaCo<SUB>1−<I>x</I></SUB>Ti<I><SUB>x</SUB></I>O<SUB>3±<I>δ</I></SUB> perovskites prepared by a citric acid assisted soft chemistry synthesis
Robert, R., Logvinovich, D., Aguirre, M. H., Ebbinghaus, S. G., Bocher, L., Tomeš, P., & Weidenkaff, A. (2010). Crystal structure, morphology and physical properties of LaCo1−xTixOδ perovskites prepared by a citric acid assisted soft chemistry synthesis. Acta Materialia, 58(2), 680-691. https://doi.org/10.1016/j.actamat.2009.09.046
Crystallization of amorphous ceria solid solutions
Rupp, J. L. M., Solenthaler, C., Gasser, P., Muecke, U. P., & Gauckler, L. J. (2007). Crystallization of amorphous ceria solid solutions. Acta Materialia, 55(10), 3505-3512. https://doi.org/10.1016/j.actamat.2007.02.002
Damage evolution of Nextel 610<sup>TM</sup> alumina fibre reinforced aluminium
Moser, B., Rossoll, A., Weber, L., Beffort, O., & Mortensen, A. (2004). Damage evolution of Nextel 610TM alumina fibre reinforced aluminium. Acta Materialia, 52(3), 573-581. https://doi.org/10.1016/j.actamat.2003.09.040
Determination of plastic properties of metals by instrumented indentation using different sharp indenters
Bucaille, J. L., Stauss, S., Felder, E., & Michler, J. (2003). Determination of plastic properties of metals by instrumented indentation using different sharp indenters. Acta Materialia, 51(6), 1663-1678. https://doi.org/10.1016/S1359-6454(02)00568-2
Determination of the local environment of silicon and the microstructure of quaternary CrAl(Si)N films
Endrino, J. L., Palacín, S., Aguirre, M. H., Gutiérrez, A., & Schäfers, F. (2007). Determination of the local environment of silicon and the microstructure of quaternary CrAl(Si)N films. Acta Materialia, 55(6), 2129-2135. https://doi.org/10.1016/j.actamat.2006.11.014
Diamond-like carbon coatings on a CoCrMo implant alloy: a detailed XPS analysis of the chemical states at the interface
Müller, U., Falub, C. V., Thorwarth, G., Voisard, C., & Hauert, R. (2011). Diamond-like carbon coatings on a CoCrMo implant alloy: a detailed XPS analysis of the chemical states at the interface. Acta Materialia, 59(3), 1150-1161. https://doi.org/10.1016/j.actamat.2010.10.048
Direct synthesis of Li[BH<SUB>4</SUB>] and Li[BD<SUB>4</SUB>] from the elements
Friedrichs, O., Buchter, F., Borgschulte, A., Remhof, A., Zwicky, C. N., Mauron, P., … Züttel, A. (2008). Direct synthesis of Li[BH4] and Li[BD4] from the elements. Acta Materialia, 56(5), 949-954. https://doi.org/10.1016/j.actamat.2007.10.055
Dislocation density and sub-grain size evolution of 2CrMoNiWV during low cycle fatigue at elevated temperatures
Mayer, T., Balogh, L., Solenthaler, C., Müller Gubler, E., & Holdsworth, S. R. (2012). Dislocation density and sub-grain size evolution of 2CrMoNiWV during low cycle fatigue at elevated temperatures. Acta Materialia, 60(6-7), 2485-2496. https://doi.org/10.1016/j.actamat.2011.12.031
Effect of pre-deformation at room temperature on shape memory properties of stainless type Fe-15Mn-5Si-9Cr-5Ni-(0.5-1.5)NbC alloys
Dong, Z. Z., Kajiwara, S., Kikuchi, T., & Sawaguchi, T. (2005). Effect of pre-deformation at room temperature on shape memory properties of stainless type Fe-15Mn-5Si-9Cr-5Ni-(0.5-1.5)NbC alloys. Acta Materialia, 53(15), 4009-4018. https://doi.org/10.1016/j.actamat.2005.04.035
Effects of Mo and Mn microadditions on strengthening and over-aging resistance of nanoprecipitation-strengthened Al-Zr-Sc-Er-Si alloys
De Luca, A., Seidman, D. N., & Dunand, D. C. (2019). Effects of Mo and Mn microadditions on strengthening and over-aging resistance of nanoprecipitation-strengthened Al-Zr-Sc-Er-Si alloys. Acta Materialia, 165, 1-14. https://doi.org/10.1016/j.actamat.2018.11.031
Electric insulation of a FeSiBC soft magnetic amorphous powder by a wet chemical method: identification of the oxide layer and its thickness control
Nakahara, S., Périgo, E. A., Pittini-Yamada, Y., de Hazan, Y., & Graule, T. (2010). Electric insulation of a FeSiBC soft magnetic amorphous powder by a wet chemical method: identification of the oxide layer and its thickness control. Acta Materialia, 58(17), 5695-5703. https://doi.org/10.1016/j.actamat.2010.06.044
Elevated temperature, micro-compression transient plasticity tests on nanocrystalline Palladium-Gold: probing activation parameters at the lower limit of crystallinity
Wehrs, J., Deckarm, M. J., Wheeler, J. M., Maeder, X., Birringer, R., Mischler, S., & Michler, J. (2017). Elevated temperature, micro-compression transient plasticity tests on nanocrystalline Palladium-Gold: probing activation parameters at the lower limit of crystallinity. Acta Materialia, 129, 124-137. https://doi.org/10.1016/j.actamat.2017.02.045
Engineering the grain boundary network of thin films via ion-irradiation: Towards improved electromigration resistance
Ma, H., La Mattina, F., Shorubalko, I., Spolenak, R., & Seita, M. (2017). Engineering the grain boundary network of thin films via ion-irradiation: Towards improved electromigration resistance. Acta Materialia, 123, 272-284. https://doi.org/10.1016/j.actamat.2016.10.040
Evolution of the microstructure of Sn-Ag-Cu solder joints exposed to ultrasonic waves during solidification
Chinnam, R. K., Fauteux, C., Neuenschwander, J., & Janczak-Rusch, J. (2011). Evolution of the microstructure of Sn-Ag-Cu solder joints exposed to ultrasonic waves during solidification. Acta Materialia, 59(4), 1474-1481. https://doi.org/10.1016/j.actamat.2010.11.011
 

Pages