Active Filters

  • (-) Empa Authors ≠ Motavalli, Masoud
  • (-) Journal = Journal of the European Ceramic Society
Search Results 1 - 20 of 91

Pages

  • RSS Feed
Select Page
A new measurement method of piezoelectric properties of single ceramic fibres
Steinhausen, R., Kern, S., Pientschke, C., Beige, H., Clemens, F., & Heiber, J. (2010). A new measurement method of piezoelectric properties of single ceramic fibres. Journal of the European Ceramic Society, 30(2), 205-209. https://doi.org/10.1016/j.jeurceramsoc.2009.06.013
A search for temperature induced time-dependent structural transitions in 10 mol%Sc<SUB>2</SUB>O<SUB>3</SUB>–1 mol%CeO<SUB>2</SUB>–ZrO<SUB>2</SUB> and 8 mol%Y<SUB>2</SUB>O<SUB>3</SUB>–ZrO<SUB>2</SUB> electrolyte ceramics
Chen, Y., Orlovskaya, N., Payzant, E. A., Graule, T., & Kuebler, J. (2015). A search for temperature induced time-dependent structural transitions in 10 mol%Sc2O3–1 mol%CeO2–ZrO2 and 8 mol%Y2O3–ZrO2 electrolyte ceramics. Journal of the European Ceramic Society, 35(3), 951-958. https://doi.org/10.1016/j.jeurceramsoc.2014.08.030
A silicon-29 MAS-NMR study of α-silicon nitride and amorphous silicon oxynitride fibres
Chollon, G., Hany, R., Vogt, U., & Berroth, K. (1998). A silicon-29 MAS-NMR study of α-silicon nitride and amorphous silicon oxynitride fibres. Journal of the European Ceramic Society, 18(5), 535-541. https://doi.org/10.1016/S0955-2219(97)00162-3
Analyzing indentation behavior of LaGaO<SUB>3</SUB> single crystals using sharp indenters
Pathak, S., Kalidindi, S. R., Moser, B., Klemenz, C., & Orlovskaya, N. (2008). Analyzing indentation behavior of LaGaO3 single crystals using sharp indenters. Journal of the European Ceramic Society, 28(10), 2039-2047. https://doi.org/10.1016/j.jeurceramsoc.2008.02.010
Aquacasting—a new shaping concept for water based reactive tape casting
Durif, C., Frömder, C., Affolter, C., Lippmann, W., & Graule, T. (2015). Aquacasting—a new shaping concept for water based reactive tape casting. Journal of the European Ceramic Society, 35(13), 3633-3640. https://doi.org/10.1016/j.jeurceramsoc.2015.04.029
BaTiO&lt;sub&gt;3&lt;/sub&gt; nanotubes by co-axial electrospinning: rheological and microstructural investigations
Hedayati, M., Taheri-Nassaj, E., Yourdkhani, A., Borlaf, M., Zhang, J., Calame, M., … Clemens, F. J. (2020). BaTiO3 nanotubes by co-axial electrospinning: rheological and microstructural investigations. Journal of the European Ceramic Society, 40(4), 1269-1279. https://doi.org/10.1016/j.jeurceramsoc.2019.11.078
BaTiO<sub>3</sub>-based thermistor hollow fibers prepared using a phase inversion spinning process for energy efficient gas sorption
Bell, J. G., Cavasin, N., Knorpp, A., Graule, T., & Stuer, M. (2022). BaTiO3-based thermistor hollow fibers prepared using a phase inversion spinning process for energy efficient gas sorption. Journal of the European Ceramic Society, 42(3), 981-992. https://doi.org/10.1016/j.jeurceramsoc.2021.10.049
CNT and PDCs: a fruitful association? Study of a polycarbosilane–MWCNT composite
Dalcanale, F., Grossenbacher, J., Blugan, G., Gullo, M. R., Brugger, J., Tevaearai, H., … Kuebler, J. (2015). CNT and PDCs: a fruitful association? Study of a polycarbosilane–MWCNT composite. Journal of the European Ceramic Society, 35(8), 2215-2224. https://doi.org/10.1016/j.jeurceramsoc.2015.02.016
Ceramic core–shell composites with modified mechanical properties prepared by thermoplastic co-extrusion
Kastyl, J., Chlup, Z., Clemens, F., & Trunec, M. (2015). Ceramic core–shell composites with modified mechanical properties prepared by thermoplastic co-extrusion. Journal of the European Ceramic Society, 35(10), 2873-2881. https://doi.org/10.1016/j.jeurceramsoc.2015.04.012
Characterization and estimation of dielectric constant of electrospun BaTiO<sub>3</sub> nanofibers at different calcination temperatures using theoretical models
Hedayati, M., Taheri-Nassaj, E., Yourdkhani, A., Borlaf, M., Rasekh, S., Amirkhizi, P., … Clemens, F. J. (2021). Characterization and estimation of dielectric constant of electrospun BaTiO3 nanofibers at different calcination temperatures using theoretical models. Journal of the European Ceramic Society, 41(2), 1299-1309. https://doi.org/10.1016/j.jeurceramsoc.2020.09.072
Characterization of perovskite powders for cathode and oxygen membranes made by different synthesis routes
Sfeir, J., Vaucher, S., Holtappels, P., Vogt, U., Schindler, H. J., Van herle, J., … Bucheli, O. (2005). Characterization of perovskite powders for cathode and oxygen membranes made by different synthesis routes. Journal of the European Ceramic Society, 25(12), 1991-1995. https://doi.org/10.1016/j.jeurceramsoc.2005.03.124
Comparative study of static and cyclic fatigue of ZrB2-SiC ceramic composites
Lugovy, M., Orlovskaya, N., Slyunyayev, V., Mitrentsis, E., Neumann, M., Aneziris, C. G., … Kuebler, J. (2018). Comparative study of static and cyclic fatigue of ZrB2-SiC ceramic composites. Journal of the European Ceramic Society, 38(4), 1128-1135. https://doi.org/10.1016/j.jeurceramsoc.2017.12.024
Comparison of the sandwiched beam (SB) and opposite roller loading (ORL) techniques for the pre-cracking of brittle materials
Trentini, E., Kübler, J., & Sglavo, V. M. (2003). Comparison of the sandwiched beam (SB) and opposite roller loading (ORL) techniques for the pre-cracking of brittle materials. Journal of the European Ceramic Society, 23(8), 1257-1262. https://doi.org/10.1016/S0955-2219(02)00290-X
Composite ceramic fuel cell fabricated by vacuum plasma spraying
Rambert, S., McEvoy, A. J., & Barthel, K. (1999). Composite ceramic fuel cell fabricated by vacuum plasma spraying. Journal of the European Ceramic Society, 19(6-7), 921-923. https://doi.org/10.1016/s0955-2219(98)00345-8
Controlled atmosphere pyrolysis of polyureasilazane for tailored volume fraction Si<sub>3</sub>N<sub>4</sub>/SiC nanocomposites powders
Strong Jr., K. T., Arreguin, S. A., & Bordia, R. K. (2016). Controlled atmosphere pyrolysis of polyureasilazane for tailored volume fraction Si3N4/SiC nanocomposites powders. Journal of the European Ceramic Society, 36(15), 3663-3669. https://doi.org/10.1016/j.jeurceramsoc.2016.03.015
Correlation between oxygen transport properties and microstructure in La<sub>0.5</sub>Sr<sub>0.5</sub>FeO<sub>3-<em>δ</em></sub>
Diethelm, S., Van herle, J., Sfeir, J., & Buffat, P. (2005). Correlation between oxygen transport properties and microstructure in La0.5Sr0.5FeO3-δ. Journal of the European Ceramic Society, 25(12), 2191-2196. https://doi.org/10.1016/j.jeurceramsoc.2005.03.028
Crack-reduced alumina/aluminum titanate composites additive manufactured by laser powder bed fusion of black TiO<sub>2−x</sub> doped alumina granules
Pfeiffer, S., Florio, K., Makowska, M., Marone, F., Yüzbasi, S., Aneziris, C. G., … Graule, T. (2022). Crack-reduced alumina/aluminum titanate composites additive manufactured by laser powder bed fusion of black TiO2−x doped alumina granules. Journal of the European Ceramic Society, 42(8), 3515-3529. https://doi.org/10.1016/j.jeurceramsoc.2022.02.046
Crack-reduced laser powder bed fused oxide ceramic parts by in-situ synthesis of negative thermal expansion phases
Pfeiffer, S., Florio, K., Makowska, M., Aneziris, C. G., Van Swygenhoven, H., Wegener, K., & Graule, T. (2023). Crack-reduced laser powder bed fused oxide ceramic parts by in-situ synthesis of negative thermal expansion phases. Journal of the European Ceramic Society, 44(2), 1012-1026. https://doi.org/10.1016/j.jeurceramsoc.2023.09.040
Critical particle concentration in electrophoretic deposition
Radice, S., Bradbury, C. R., Michler, J., & Mischler, S. (2010). Critical particle concentration in electrophoretic deposition. Journal of the European Ceramic Society, 30(5), 1079-1088. https://doi.org/10.1016/j.jeurceramsoc.2009.08.021
Cyclic fatigue effect in particulate ceramic composites
Lugovy, M., Slyunyayev, V., Orlovskaya, N., Reece, M., Graule, T., & Kuebler, J. (2016). Cyclic fatigue effect in particulate ceramic composites. Journal of the European Ceramic Society, 36(14), 3257-3266. https://doi.org/10.1016/j.jeurceramsoc.2016.05.020
 

Pages