Active Filters

  • (-) Empa Authors ≠ Zubrzycka, Paulina
  • (-) Keywords = microstructure
Search Results 1 - 20 of 176

Pages

  • RSS Feed
Select Page
3D virtual pome fruit tissue generation based on cell growth modeling
Abera, M. K., Verboven, P., Herremans, E., Defraeye, T., Fanta, S. W., Ho, Q. T., … Nicolai, B. M. (2014). 3D virtual pome fruit tissue generation based on cell growth modeling. Food and Bioprocess Technology, 7(2), 542-555. https://doi.org/10.1007/s11947-013-1127-3
Influence of limestone on the hydration of ternary slag cements
Adu-Amankwah, S., Zajac, M., Stabler, C., Lothenbach, B., & Black, L. (2017). Influence of limestone on the hydration of ternary slag cements. Cement and Concrete Research, 100, 96-109. https://doi.org/10.1016/j.cemconres.2017.05.013
Microstructure and mechanical properties of Ti-15-3 alloy gas tungsten arc welds prepared using CP-titanium filler
Anis, A. L., Talari, M. K., Mohd Arif, I. A., Kishore Babu, N., Ismail, M. H., & Janaki Ram, G. D. (2017). Microstructure and mechanical properties of Ti-15-3 alloy gas tungsten arc welds prepared using CP-titanium filler. Transactions of the Indian Institute of Metals, 70(3), 685-690. https://doi.org/10.1007/s12666-017-1049-2
Grain refinement of Ti-15V-3Cr-3Sn-3Al metastable β titanium alloy welds using boron-modified fillers
Anis, A. L., Talari, M. K., Kishore Babu, N., Ismail, M. H., Janaki Ram, G. D., & Mohd Arif, I. A. (2018). Grain refinement of Ti-15V-3Cr-3Sn-3Al metastable β titanium alloy welds using boron-modified fillers. Journal of Alloys and Compounds, 749, 320-328. https://doi.org/10.1016/j.jallcom.2018.03.286
Grain refinement, microstructural and hardness investigation of C added Ti-15-3 alloys prepared by argon arc melting
Arif, I. A. M., Talari, M. K., Anis, A. L., Ismail, M. H., & Kishore Babu, N. (2017). Grain refinement, microstructural and hardness investigation of C added Ti-15-3 alloys prepared by argon arc melting. Transactions of the Indian Institute of Metals, 70(3), 861-865. https://doi.org/10.1007/s12666-017-1048-3
Modeling of interface and internal disorder applied to XRD analysis of Ag-based nano-multilayers
Ariosa, D., Cancellieri, C., Araullo-Peters, V., Chiodi, M., Klyatskina, E., Janczak-Rusch, J., & Jeurgens, L. P. H. (2018). Modeling of interface and internal disorder applied to XRD analysis of Ag-based nano-multilayers. ACS Applied Materials and Interfaces, 10(24), 20938-20949. https://doi.org/10.1021/acsami.8b02653
Microstructure evolution and mechanical properties investigation of friction stir welded AlMg5-Al<sub>2</sub>O<sub>3</sub> nanocomposites
Babu, N. K., Kallip, K., Leparoux, M., AlOgab, K. A., Reddy, G. M., & Talari, M. K. (2016). Microstructure evolution and mechanical properties investigation of friction stir welded AlMg5-Al2O3 nanocomposites. In The Minerals, Metals & Materials Society (Ed.), TMS 2016 145th annual meeting & exhibition. Supplemental proceedings (pp. 729-736). https://doi.org/10.1002/9781119274896.ch87
Microstructural, tribological and corrosion aspects of thermally sprayed Ti-Cr-Si coatings
Bandyopadhyay, P. P., Hadad, M., Jaeggi, C., & Siegmann, S. (2008). Microstructural, tribological and corrosion aspects of thermally sprayed Ti-Cr-Si coatings. Surface and Coatings Technology, 203(1-2), 35-45. https://doi.org/10.1016/j.surfcoat.2008.07.026
Thermal spraying and performance of graded composite cathodes as SOFC-component
Barthel, K., & Rambert, S. (1999). Thermal spraying and performance of graded composite cathodes as SOFC-component. In W. A. Kaysser (Ed.), Materials science forum: Vol. 308-311. FGM'98. Proceedings (pp. 800-805). https://doi.org/10.4028/www.scientific.net/MSF.308-311.800
Microstructure and polarization resistance of thermally sprayed composite cathodes for solid oxide fuel cell use
Barthel, K., Rambert, S., & Siegmann, S. (2000). Microstructure and polarization resistance of thermally sprayed composite cathodes for solid oxide fuel cell use. Journal of Thermal Spray Technology, 9(3), 343-347. https://doi.org/10.1361/105996300770349773
Interface velocity dependent solute trapping and phase selection during rapid solidification of laser melted hypo-eutectic Al-11at.%Cu alloy
Bathula, V., Liu, C., Zweiacker, K., McKeown, J., & Wiezorek, J. M. K. (2020). Interface velocity dependent solute trapping and phase selection during rapid solidification of laser melted hypo-eutectic Al-11at.%Cu alloy. Acta Materialia, 195, 341-357. https://doi.org/10.1016/j.actamat.2020.04.006
<I>In vitro </I>bioactivity of micro metal injection moulded stainless steel with defined surface features
Bitar, M., Friederici, V., Imgrund, P., Brose, C., & Bruinink, A. (2012). In vitro bioactivity of micro metal injection moulded stainless steel with defined surface features. European Cells and Materials, 23, 333-347. https://doi.org/10.22203/eCM.v023a26
<I>Chimie douce</I> synthesis and thermochemical characterization of mesoporous perovskite-type titanate phases
Bocher, L., Aguirre, M. H., Robert, R., Trottmann, M., Logvinovich, D., Hug, P., & Weidenkaff, A. (2007). Chimie douce synthesis and thermochemical characterization of mesoporous perovskite-type titanate phases. Thermochimica Acta, 457(1-2), 11-19. https://doi.org/10.1016/j.tca.2007.02.013
Porosity and microstructure of plasma deposited TiO<SUB>2</SUB> thin films
Borrás, A., Sánchez-Valencia, J. R., Garrido-Molinero, J., Barranco, A., & González-Elipe, A. R. (2009). Porosity and microstructure of plasma deposited TiO2 thin films. Microporous and Mesoporous Materials, 118(1-3), 314-324. https://doi.org/10.1016/j.micromeso.2008.09.002
Impact of ferrocene on the structure of diesel exhaust soot as probed with wide-angle X-ray scattering and C(1s) NEXAFS spectroscopy
Braun, A., Huggins, F. E., Kelly, K. E., Mun, B. S., Ehrlich, S. N., & Huffman, G. P. (2006). Impact of ferrocene on the structure of diesel exhaust soot as probed with wide-angle X-ray scattering and C(1s) NEXAFS spectroscopy. Carbon, 44(14), 2904-2911. https://doi.org/10.1016/j.carbon.2006.05.051
Microstructure, residual stresses and shear strength of diamond-steel-joints brazed with a Cu-Sn-based active filler alloy
Buhl, S., Leinenbach, C., Spolenak, R., & Wegener, K. (2012). Microstructure, residual stresses and shear strength of diamond-steel-joints brazed with a Cu-Sn-based active filler alloy. International Journal of Refractory Metals and Hard Materials, 30(1), 16-24. https://doi.org/10.1016/j.ijrmhm.2011.06.006
The role of Si incorporation on the anodic growth of barrier-type Al oxide
Cancellieri, C., Evangelisti, F., Geldmacher, T., Araullo-Peters, V., Ott, N., Chiodi, M., … Schmutz, P. (2017). The role of Si incorporation on the anodic growth of barrier-type Al oxide. Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 226, 120-131. https://doi.org/10.1016/j.mseb.2017.09.012
The effect of interfacial Ge and RF-Bias on the microstructure and stress evolution upon annealing of Ag/AlN multilayers
Cancellieri, C., Klyatskina, E., Chiodi, M., Janczak-Rusch, J., & Jeurgens, L. (2018). The effect of interfacial Ge and RF-Bias on the microstructure and stress evolution upon annealing of Ag/AlN multilayers. Applied Sciences, 8(12), 2403 (13 pp.). https://doi.org/10.3390/app8122403
Microstructure-property control in functional materials by multilayer design
Cancellieri, C., Lorenzin, G., & Jeurgens, L. P. H. (2022). Microstructure-property control in functional materials by multilayer design. Chimia, 76(3), 223-228. https://doi.org/10.2533/chimia.2022.223
Microstructure and mechanical properties of Ni/10 mol% Sc<SUB>2</SUB>O<SUB>3</SUB>–1 mol% CeO<SUB>2</SUB>–ZrO<SUB>2</SUB> cermet anode for solid oxide fuel cells
Chen, Y., Orlovskaya, N., Graule, T., & Kuebler, J. (2013). Microstructure and mechanical properties of Ni/10 mol% Sc2O3–1 mol% CeO2–ZrO2 cermet anode for solid oxide fuel cells. Journal of the European Ceramic Society, 33(3), 557-564. https://doi.org/10.1016/j.jeurceramsoc.2012.10.003
 

Pages