Active Filters

  • (-) Empa Authors ≠ Clemens, Frank J.
  • (-) Journal = Journal of the European Ceramic Society
Search Results 1 - 20 of 73

Pages

  • RSS Feed
Select Page
MgAl2O4 spinel with transmittance approaching theoretical value at reduced sintering temperatures
Zubrzycka, P., Radecka, M., Graule, T., Trenczek-Zając, A., Zientara, D., & Stuer, M. (2024). MgAl2O4 spinel with transmittance approaching theoretical value at reduced sintering temperatures. Journal of the European Ceramic Society. https://doi.org/10.1016/j.jeurceramsoc.2024.03.049
Liquid metal infiltration of silicon based alloys into porous carbonaceous materials Part-III: experimental verification of conversion products and infiltration depth by infiltration of Si-Zr alloy into mixed SiC/graphite preforms
Naikade, M., Hain, C., Kastelik, K., Parrilli, A., Graule, T., Weber, L., & Ortona, A. (2023). Liquid metal infiltration of silicon based alloys into porous carbonaceous materials Part-III: experimental verification of conversion products and infiltration depth by infiltration of Si-Zr alloy into mixed SiC/graphite preforms. Journal of the European Ceramic Society, 43(1), 47-53. https://doi.org/10.1016/j.jeurceramsoc.2022.09.036
Crack-reduced laser powder bed fused oxide ceramic parts by in-situ synthesis of negative thermal expansion phases
Pfeiffer, S., Florio, K., Makowska, M., Aneziris, C. G., Van Swygenhoven, H., Wegener, K., & Graule, T. (2023). Crack-reduced laser powder bed fused oxide ceramic parts by in-situ synthesis of negative thermal expansion phases. Journal of the European Ceramic Society, 44(2), 1012-1026. https://doi.org/10.1016/j.jeurceramsoc.2023.09.040
BaTiO<sub>3</sub>-based thermistor hollow fibers prepared using a phase inversion spinning process for energy efficient gas sorption
Bell, J. G., Cavasin, N., Knorpp, A., Graule, T., & Stuer, M. (2022). BaTiO3-based thermistor hollow fibers prepared using a phase inversion spinning process for energy efficient gas sorption. Journal of the European Ceramic Society, 42(3), 981-992. https://doi.org/10.1016/j.jeurceramsoc.2021.10.049
Multiscale 2D/3D microshaping and property tuning of polymer-derived SiCN ceramics
Hagelüken, L., Sasikumar, P. V. W., Lee, H. Y., Di Stadio, D., Chandorkar, Y., Rottmar, M., … Brugger, J. (2022). Multiscale 2D/3D microshaping and property tuning of polymer-derived SiCN ceramics. Journal of the European Ceramic Society, 42(5), 1963-1970. https://doi.org/10.1016/j.jeurceramsoc.2021.12.044
Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part I: modelling of channel filling and reaction phase formation
Naikade, M., Ortona, A., Graule, T., & Weber, L. (2022). Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part I: modelling of channel filling and reaction phase formation. Journal of the European Ceramic Society, 42(5), 1971-1983. https://doi.org/10.1016/j.jeurceramsoc.2021.12.068
Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part II: experimental verification of modelling approaches by infiltration of Si-Zr alloy into idealized microchannels
Naikade, M., Hain, C., Kastelik, K., Brönnimann, R., Bianchi, G., Ortona, A., … Weber, L. (2022). Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part II: experimental verification of modelling approaches by infiltration of Si-Zr alloy into idealized microchannels. Journal of the European Ceramic Society, 42(5), 1984-1994. https://doi.org/10.1016/j.jeurceramsoc.2022.01.004
Crack-reduced alumina/aluminum titanate composites additive manufactured by laser powder bed fusion of black TiO<sub>2−x</sub> doped alumina granules
Pfeiffer, S., Florio, K., Makowska, M., Marone, F., Yüzbasi, S., Aneziris, C. G., … Graule, T. (2022). Crack-reduced alumina/aluminum titanate composites additive manufactured by laser powder bed fusion of black TiO2−x doped alumina granules. Journal of the European Ceramic Society, 42(8), 3515-3529. https://doi.org/10.1016/j.jeurceramsoc.2022.02.046
Residual stress induced failure of Ti-6Al-4V/Si<sub>3</sub>N<sub>4</sub> joints brazed with Ag-Cu-Ti filler: the effects of brazing zone's elasto-plasticity and ceramics' intrinsic properties
Ong, F. S., Rheingans, B., Goto, K., Tobe, H., Ohmura, T., Janczak-Rusch, J., & Sato, E. (2021). Residual stress induced failure of Ti-6Al-4V/Si3N4 joints brazed with Ag-Cu-Ti filler: the effects of brazing zone's elasto-plasticity and ceramics' intrinsic properties. Journal of the European Ceramic Society, 41(13), 6319-6329. https://doi.org/10.1016/j.jeurceramsoc.2021.06.038
Direct laser additive manufacturing of high performance oxide ceramics: a state-of-the-art review
Pfeiffer, S., Florio, K., Puccio, D., Grasso, M., Colosimo, B. M., Aneziris, C. G., … Graule, T. (2021). Direct laser additive manufacturing of high performance oxide ceramics: a state-of-the-art review. Journal of the European Ceramic Society, 41(13), 6087-6114. https://doi.org/10.1016/j.jeurceramsoc.2021.05.035
Fabrication of ZrO&lt;sub&gt;2&lt;/sub&gt; and ATZ materials via UV-LCM-DLP additive manufacturing technology
Borlaf, M., Szubra, N., Serra-Capdevila, A., Kubiak, W. W., & Graule, T. (2020). Fabrication of ZrO2 and ATZ materials via UV-LCM-DLP additive manufacturing technology. Journal of the European Ceramic Society, 40(4), 1574-1581. https://doi.org/10.1016/j.jeurceramsoc.2019.11.037
Development of UV-curable ZrO&lt;sub&gt;2&lt;/sub&gt; slurries for additive manufacturing (LCM-DLP) technology
Borlaf, M., Serra-Capdevila, A., Colominas, C., & Graule, T. (2019). Development of UV-curable ZrO2 slurries for additive manufacturing (LCM-DLP) technology. Journal of the European Ceramic Society, 39(13), 3797-3803. https://doi.org/10.1016/j.jeurceramsoc.2019.05.023
Studying the wettability of Si and eutectic Si-Zr alloy on carbon and silicon carbide by sessile drop experiments
Naikade, M., Fankhänel, B., Weber, L., Ortona, A., Stelter, M., & Graule, T. (2019). Studying the wettability of Si and eutectic Si-Zr alloy on carbon and silicon carbide by sessile drop experiments. Journal of the European Ceramic Society, 39(4), 735-742. https://doi.org/10.1016/j.jeurceramsoc.2018.11.049
High temperature stiffening of ferroelastic LaCoO<sub>3</sub>
Orlovskaya, N., Lugovy, M., Verbylo, D., Reece, M. J., Graule, T., & Kuebler, J. (2019). High temperature stiffening of ferroelastic LaCoO3. Journal of the European Ceramic Society, 39, 3338-3343. https://doi.org/10.1016/j.jeurceramsoc.2019.03.052
Comparative study of static and cyclic fatigue of ZrB2-SiC ceramic composites
Lugovy, M., Orlovskaya, N., Slyunyayev, V., Mitrentsis, E., Neumann, M., Aneziris, C. G., … Kuebler, J. (2018). Comparative study of static and cyclic fatigue of ZrB2-SiC ceramic composites. Journal of the European Ceramic Society, 38(4), 1128-1135. https://doi.org/10.1016/j.jeurceramsoc.2017.12.024
Effect of carbon contamination on the sintering of alumina ceramics
Michálek, M., Michálková, M., Blugan, G., & Kuebler, J. (2018). Effect of carbon contamination on the sintering of alumina ceramics. Journal of the European Ceramic Society, 38, 193-199. https://doi.org/10.1016/j.jeurceramsoc.2017.08.011
Non-congruence of high-temperature mechanical and structural behaviors of LaCoO<SUB>3</SUB> based perovskites
Aman, A., Jordan, R., Chen, Y., Stadelmann, R., Lugovy, M., Orlovskaya, N., … Kuebler, J. (2017). Non-congruence of high-temperature mechanical and structural behaviors of LaCoO3 based perovskites. Journal of the European Ceramic Society, 37(4), 1563-1576. https://doi.org/10.1016/j.jeurceramsoc.2016.11.005
Influence of cerium doping on mechanical properties of tetragonal scandium-stabilized zirconia
Kubrin, R., Blugan, G., & Kuebler, J. (2017). Influence of cerium doping on mechanical properties of tetragonal scandium-stabilized zirconia. Journal of the European Ceramic Society, 37(4), 1651-1656. https://doi.org/10.1016/j.jeurceramsoc.2016.11.038
Effects of Ni doping on the sintering and electrical properties of BaZr0.8Y0.2O3−δ proton conducting electrolyte prepared by Flame Spray Synthesis
Bozza, F., Bator, K., Kubiak, W. W., & Graule, T. (2016). Effects of Ni doping on the sintering and electrical properties of BaZr0.8Y0.2O3−δ proton conducting electrolyte prepared by Flame Spray Synthesis. Journal of the European Ceramic Society, 36(1), 101-107. https://doi.org/10.1016/j.jeurceramsoc.2015.09.010
Cyclic fatigue effect in particulate ceramic composites
Lugovy, M., Slyunyayev, V., Orlovskaya, N., Reece, M., Graule, T., & Kuebler, J. (2016). Cyclic fatigue effect in particulate ceramic composites. Journal of the European Ceramic Society, 36(14), 3257-3266. https://doi.org/10.1016/j.jeurceramsoc.2016.05.020
 

Pages