| 2CV.3.19: Towards the correlation of mechanical properties and sawing parameters of silicon wafers
Bidiville, A., Wasmer, K., Michler, J., Ballif, C., Van der Meer, M., & Nasch, P. M. (2007). 2CV.3.19: Towards the correlation of mechanical properties and sawing parameters of silicon wafers. Presented at the Poster presented at the 22nd European Photovoltaic Solar Energy & Exhibition. Mailand, Italy. |
| 2CV.3.20: effect of strength test methods on silicon wafer strength measurements
Wasmer, K., Bidiville, A., Michler, J., Ballif, C., Van der Meer, M., & Nasch, P. (2007). 2CV.3.20: effect of strength test methods on silicon wafer strength measurements. Presented at the 22nd European photovoltaic solar energy & exhibition. Mailand, Italy. |
| A multiscale approach for the simulation of dendritic microstructures in Al-ZN-SI coatings
Niederberger, C., Michler, J., & Jacot, A. (2006). A multiscale approach for the simulation of dendritic microstructures in Al-ZN-SI coatings. In C. A. Gandin (Ed.), Vol. 1. Modeling of casting, welding and advanced solidification processes - XI (pp. 463-470). TMS. |
| A nano-tensile testing system for studying nanostructures inside an electron microscope: design, characterization and application
Zhang, D. (2010). A nano-tensile testing system for studying nanostructures inside an electron microscope: design, characterization and application [Doctoral dissertation, EPF Lausanne]. https://doi.org/10.5075/epfl-thesis-4605 |
| A new push-pull sample design for microscale mode 1 fracture toughness measurements under uniaxial tension
Schwiedrzik, J., Ast, J., Maeder, X., Pethö, L., & Michler, J. (2017). A new push-pull sample design for microscale mode 1 fracture toughness measurements under uniaxial tension. Presented at the ECI nanomechanical testing in materials research and development VI. Dubrovnik, Croatia. |
| Adding tip-enhanced raman spectroscopy functionality to the “NanoBits” toolbox concept for atomic force microscopy
Gamez, G., LeNader, V., Bartenwerfer, M., Savenko, A., Brodard, P., & Michler, J. (2012). Adding tip-enhanced raman spectroscopy functionality to the “NanoBits” toolbox concept for atomic force microscopy. Presented at the The great scientific exchange (SCIX). Kansas City, USA. |
| Adhesion tests for thermal spray coatings: tentative of correlation of bond strength and interfacial indentation
Hadad, M., Marot, G., Chicot, D., Lesage, J., Michler, J., & Siegmann, S. (2005). Adhesion tests for thermal spray coatings: tentative of correlation of bond strength and interfacial indentation. In S. Mahlstedt & B. Brommer (Eds.), German association for welding and related technologies (p. (8 pp.). Deutscher Verband für Schweißen und verwandte Verfahren. |
| An overview of nanomaterial testing using in-situ nanoindenter
Wasmer, K., Moser, B., Pouvreau, C., & Michler, J. (2007). An overview of nanomaterial testing using in-situ nanoindenter. In P. Ander, W. Bauer, S. Heinemann, P. Kallio, R. Passas, & A. Treimanis (Eds.), Fine structure of papermaking fibres - the final report of COST Action E54 2011 (pp. 44-47). |
| Analysis of longitudinal twinning in y-TiAl by microcompression up to 700 °C with strain and crystal orientation mapping
Edwards, T. E. J., Di Gioacchino, F., Mohanty, G., Wehrs, J., Michler, J., & Clegg, W. J. (2018). Analysis of longitudinal twinning in y-TiAl by microcompression up to 700 °C with strain and crystal orientation mapping. Presented at the Gordon research conference on thin film and small scale mechanical behavior. Lewiston, USA. |
| Anisotropic micromechanical properties and deformation mechanisms of bone extracellular matrix in tension and compression
Schwiedrzik, J., Casari, D., Pethö, L., Taylor, A., Wolfram, U., Zysset, P. K., & Michler, J. (2018). Anisotropic micromechanical properties and deformation mechanisms of bone extracellular matrix in tension and compression. Presented at the Gordon research conference on thin film and small scale mechanical behavior. Lewiston, USA. |
| Annealing effect on coherent-incoherent interface tricomponent nanoscale metallic multilayer thin films
Taylor, A. A., Schoeppner, R. L., Cordill, M. J., Zbib, H. M., Bahr, D. F., & Michler, J. (2015). Annealing effect on coherent-incoherent interface tricomponent nanoscale metallic multilayer thin films. Presented at the Nanomechanical testing in materials research and development V. Albufeira, PT. |
| Anomalous plasticity in amorphous silica micropillars tested at high strain rates
Ramachandramoorthy, R., Schwiedrzik, J., Petho, L., Frey, D., Bregeut, J. M., & Michler, J. (2018). Anomalous plasticity in amorphous silica micropillars tested at high strain rates. Presented at the Gordon research conference on thin film and small scale mechanical behavior. Lewiston, USA. |
| Application of FIB-TOF-SIMS technique for elemental characterization of new thin film energy devices
Priebe, A., Avancini, E., Sastre Pellicer, J., Bücheler, S., & Michler, J. (2018). Application of FIB-TOF-SIMS technique for elemental characterization of new thin film energy devices. Presented at the 2nd EuFN workshop 2018. Grenoble, France. |
| Assessing bone ultrastructure via nanoscale X-Ray computed tomography and quantitative polarized raman spectroscopy
Kochetkova, T., Kormilina, T., Englisch, S., Drobek, D., Wirth, J., Apeleo Zubiri, B., … Schwiedrzik, J. (2022). Assessing bone ultrastructure via nanoscale X-Ray computed tomography and quantitative polarized raman spectroscopy. Presented at the 27th congress of the European Society of Biomechanics. Porto, Portugal. |
| Assessing jaw bone quality at the micro- and mesoscale
Kochetkova, T., Groetsch, A., Indermaur, M., Remund, S., Neuenschwander, B., Hofstetter, J., … Schwiedrzik, J. (2022). Assessing jaw bone quality at the micro- and mesoscale. Presented at the GCB symposium 2022. Bern, Switzerland. |
| Assessment of mechanical properties using instrumented indentation and inverse methods
Stauss-Ueno, S. N. (2006). Assessment of mechanical properties using instrumented indentation and inverse methods [Doctoral dissertation, EPF Lausanne]. https://doi.org/10.5075/epfl-thesis-3282 |
| Bio-coatings with controlled porosity by electrophoretic deposition of TiO<sub>2-</sub>polystyrene composite particles
Radice, S., Kern, P., Dietsch, H., Dittmann, R., Michler, J., & Mischler, S. (2007). Bio-coatings with controlled porosity by electrophoretic deposition of TiO2-polystyrene composite particles. Presented at the 21st European conference on biomaterials (ESB 2007). Brighton, UK. |
| Biomimetic ZnO@ZnS micro/nanostructures for pollutant remediation
Gómez, E., Serrà, A., Zhang, Y., Sepúlveda, B., Nogués, J., Michler, J., & Philippe, L. (2019). Biomimetic ZnO@ZnS micro/nanostructures for pollutant remediation. Presented at the 25th Topical Meeting of the International Society of Electrochemistry - New electrochemical processes for energy and the environment. Toledo, Spain. |
| Characterising the sticking coefficient of chemistries relevant for artificial solid electrolyte interphases
Lapeyre, L., Mackosz, K., Szmyt, W., Pethö, L., Michler, J., Raynaud, P., & Utke, I. (2023). Characterising the sticking coefficient of chemistries relevant for artificial solid electrolyte interphases. Presented at the EuroCVD/Baltic ALD 2023. Leuven. |
| Characterization of nozzle-based gas injection systems (GISs) by simulations and experiments
Friedli, V., Michler, J., & Utke, I. (2008). Characterization of nozzle-based gas injection systems (GISs) by simulations and experiments. Presented at the 2nd international workshop on focused electron beam induced processing FEBIP. Thun, Switzerland. |