| Site-specifically tailored microstructures with enhanced strength and hardening through laser powder bed fusion
Sofras, C., Čapek, J., Li, X., Roth, C. C., Leinenbach, C., Logé, R. E., … Polatidis, E. (2024). Site-specifically tailored microstructures with enhanced strength and hardening through laser powder bed fusion. Materials and Design, 237, 112539 (11 pp.). https://doi.org/10.1016/j.matdes.2023.112539 |
| Superhard oxidation-resistant Ti<sub>1-x</sub>Al<sub>x</sub>B<sub>y</sub> thin films grown by hybrid HiPIMS/DCMS co-sputtering diboride targets without external substrate heating
Wicher, B., Pshyk, O. V., Li, X., Bakhit, B., Rogoz, V., Petrov, I., … Greczynski, G. (2024). Superhard oxidation-resistant Ti1-xAlxBy thin films grown by hybrid HiPIMS/DCMS co-sputtering diboride targets without external substrate heating. Materials and Design, 238, 112727 (14 pp.). https://doi.org/10.1016/j.matdes.2024.112727 |
| High-power-density sputtering of industrial-scale targets: Case study of (Al,Cr)N
Klimashin, F. F., Klusoň, J., Učík, M., Žemlička, R., Jílek, M., Lümkemann, A., … Edwards, T. E. J. (2024). High-power-density sputtering of industrial-scale targets: Case study of (Al,Cr)N. Materials and Design, 237, 112553 (12 pp.). https://doi.org/10.1016/j.matdes.2023.112553 |
| Influence of wall thickness on microstructure and mechanical properties of thin-walled 316L stainless steel produced by laser powder bed fusion
Wrobel, R., Del Guidice, L., Scheel, P., Abando, N., Maeder, X., Vassiliou, M., … Leinenbach, C. (2024). Influence of wall thickness on microstructure and mechanical properties of thin-walled 316L stainless steel produced by laser powder bed fusion. Materials and Design, 238, 112652. https://doi.org/10.1016/j.matdes.2024.112652 |
| Crosslinking and pyrolysis of a methyl-silsesquioxane: effect of heating rate on fabrication of polymer derived mullite ceramics using thermoplastic shaping
Sarraf, F., Hadian, A., Gfeller, F., Churakov, S. V., & Clemens, F. (2024). Crosslinking and pyrolysis of a methyl-silsesquioxane: effect of heating rate on fabrication of polymer derived mullite ceramics using thermoplastic shaping. Materials and Design, 237, 112578 (13 pp.). https://doi.org/10.1016/j.matdes.2023.112578 |
| Crystalline or amorphous? A critical evaluation of phenomenological phase selection rules
Wieczerzak, K., Sharma, A., Hain, C., & Michler, J. (2023). Crystalline or amorphous? A critical evaluation of phenomenological phase selection rules. Materials and Design, 230, 111994 (26 pp.). https://doi.org/10.1016/j.matdes.2023.111994 |
| Polydimethylsiloxane based soft polymer optical fibers: from the processing-property relationship to pressure sensing applications
Sharma, K., Morlec, E., Valet, S., Camenzind, M., Weisse, B., Rossi, R. M., … Boesel, L. F. (2023). Polydimethylsiloxane based soft polymer optical fibers: from the processing-property relationship to pressure sensing applications. Materials and Design, 232, 112115 (14 pp.). https://doi.org/10.1016/j.matdes.2023.112115 |
| Flexible and ultrathin waterproof conductive cellular membranes based on conformally gold-coated PVDF nanofibers and their potential as gas diffusion electrode
Yu, R., Senocrate, A., Bernasconi, F., Künniger, T., Müller, L., Pauer, R., … Wang, J. (2023). Flexible and ultrathin waterproof conductive cellular membranes based on conformally gold-coated PVDF nanofibers and their potential as gas diffusion electrode. Materials and Design, 225, 111441 (11 pp.). https://doi.org/10.1016/j.matdes.2022.111441 |
| Direct 3D microprinting of highly conductive gold structures via localized electrodeposition
Schürch, P., Osenberg, D., Testa, P., Bürki, G., Schwiedrzik, J., Michler, J., & Koelmans, W. W. (2023). Direct 3D microprinting of highly conductive gold structures via localized electrodeposition. Materials and Design, 227, 111780 (8 pp.). https://doi.org/10.1016/j.matdes.2023.111780 |
| Determination of critical resolved shear stresses associated with slips in pure Zn and Zn-Ag alloys via micro-pillar compression
Bednarczyk, W., Wątroba, M., Jain, M., Mech, K., Bazarnik, P., Bała, P., … Wieczerzak, K. (2023). Determination of critical resolved shear stresses associated with slips in pure Zn and Zn-Ag alloys via micro-pillar compression. Materials and Design, 229, 111897 (11 pp.). https://doi.org/10.1016/j.matdes.2023.111897 |
| Shape memory and mechanical properties of a Fe-Mn-Si-based shape memory alloy: effect of crystallographic texture generated during additive manufacturing
Ferretto, I., Kim, D., Lee, W. J., Hosseini, E., della Ventura, N. M., Sharma, A., … Leinenbach, C. (2023). Shape memory and mechanical properties of a Fe-Mn-Si-based shape memory alloy: effect of crystallographic texture generated during additive manufacturing. Materials and Design, 229, 111928 (19 pp.). https://doi.org/10.1016/j.matdes.2023.111928 |
| Filament extrusion-based additive manufacturing of NiTi shape memory alloys
Wagner, M. A., Ocana-Pujol, J. L., Hadian, A., Clemens, F., & Spolenak, R. (2023). Filament extrusion-based additive manufacturing of NiTi shape memory alloys. Materials and Design, 225, 111418 (12 pp.). https://doi.org/10.1016/j.matdes.2022.111418 |
| Correlated disorder by defects clusters in LiNbO<sub>3</sub> single crystals after crystal ion-slicing
Dolabella, S., Reinhardt, A., Bartasyte, A., Margueron, S., Sharma, A., Maeder, X., … Borzì, A. (2023). Correlated disorder by defects clusters in LiNbO3 single crystals after crystal ion-slicing. Materials and Design, 231, 112001 (12 pp.). https://doi.org/10.1016/j.matdes.2023.112001 |
| Joining of alumina ceramics with Ti and Zr interlayers by spark plasma sintering
Stosz, M., Narayanasamy, S., Bell, J., Graule, T., Kata, D., & Blugan, G. (2023). Joining of alumina ceramics with Ti and Zr interlayers by spark plasma sintering. Materials and Design, 227, 111724 (8 pp.). https://doi.org/10.1016/j.matdes.2023.111724 |
| <em>In situ</em> fragmentation of Al/Al<sub>2</sub>O<sub>3</sub> multilayers on flexible substrates in biaxial tension
Putz, B., Edwards, T. E. J., Huszar, E., Pethö, L., Kreiml, P., Cordill, M. J., … Michler, J. (2023). In situ fragmentation of Al/Al2O3 multilayers on flexible substrates in biaxial tension. Materials and Design, 232, 112081 (15 pp.). https://doi.org/10.1016/j.matdes.2023.112081 |
| Orientation-dependent extreme shear strain in single-crystalline silicon - from elasticity to fracture
Lauener, C. M., Schwarz, F., Pethö, L., Wheeler, J. M., Michler, J., & Spolenak, R. (2023). Orientation-dependent extreme shear strain in single-crystalline silicon - from elasticity to fracture. Materials and Design, 235, 112423 (9 pp.). https://doi.org/10.1016/j.matdes.2023.112423 |
| 4D printing of recoverable buckling-induced architected iron-based shape memory alloys
Jafarabadi, A., Ferretto, I., Mohri, M., Leinenbach, C., & Ghafoori, E. (2023). 4D printing of recoverable buckling-induced architected iron-based shape memory alloys. Materials and Design, 233, 112216 (12 pp.). https://doi.org/10.1016/j.matdes.2023.112216 |
| Strengthening of 3D printed Cu micropillar in Cu-Ni core-shell structure
Jain, M., Sharma, A., Schürch, P., Della Ventura, N. M., Koelmans, W. W., Maeder, X., … Michler, J. (2023). Strengthening of 3D printed Cu micropillar in Cu-Ni core-shell structure. Materials and Design, 227, 111717 (12 pp.). https://doi.org/10.1016/j.matdes.2023.111717 |
| Self-Supervised Bayesian representation learning of acoustic emissions from laser powder bed Fusion process for in-situ monitoring
Pandiyan, V., Wróbel, R., Richter, R. A., Leparoux, M., Leinenbach, C., & Shevchik, S. (2023). Self-Supervised Bayesian representation learning of acoustic emissions from laser powder bed Fusion process for in-situ monitoring. Materials and Design, 235, 112458 (15 pp.). https://doi.org/10.1016/j.matdes.2023.112458 |
| Wire and arc additive manufacturing of Fe-based shape memory alloys: microstructure, mechanical and functional behavior
Felice, I. O., Shen, J., Barragan, A. F. C., Moura, I. A. B., Li, B., Wang, B., … Oliveira, J. P. (2023). Wire and arc additive manufacturing of Fe-based shape memory alloys: microstructure, mechanical and functional behavior. Materials and Design, 231, 112004 (15 pp.). https://doi.org/10.1016/j.matdes.2023.112004 |