Active Filters

  • (-) Keywords ≠ noise correlation
  • (-) Keywords = wood
Search Results 1 - 20 of 58
Select Page
Durability and detail design - the result of 15 years of systematic improvements
Kropf, F. W. (1996). Durability and detail design - the result of 15 years of systematic improvements. In Proceedings der national conference on wood transportation structures. Madison: sine nomine.
Weather protection of critical details for better durability - 15 years of systematic improvements
Kropf, F. W., & Meierhofer, U. A. (1996). Weather protection of critical details for better durability - 15 years of systematic improvements (p. (6 pp.). Presented at the International wood engineering conference '96. .
Modelling of wood products in life cycle assessment with special emphasis on recycling and end-of-life
Werner, F. (2001). Modelling of wood products in life cycle assessment with special emphasis on recycling and end-of-life. (Research and Work Report EMPA laboratory, Report No.: 115/48). Empa.
Porous ceramics derived from wood
Vogt, U., Herzog, A., Graule, T., Klingner, R., & Zimmermann, T. (2002). Porous ceramics derived from wood. C. Kermel, V. Lardot, D. Libert, & I. Urbain (Eds.), Key engineering materials: Vol. 206-213. (pp. 1941-1944). Presented at the European ceramic society (7th ECerS). https://doi.org/10.4028/www.scientific.net/KEM.206-213.1941
Interdependencies between LC-modelling and the use of LCA in product design-related decision situations with special emphasis on the influence of cognitive models and values on the modelling of reuse & recycling and other end-of-life options
Werner, F. (2002). Interdependencies between LC-modelling and the use of LCA in product design-related decision situations with special emphasis on the influence of cognitive models and values on the modelling of reuse & recycling and other end-of-life options [Doctoral dissertation, ETH Zürich]. https://doi.org/10.3929/ethz-a-004483981
Post-consumer wood in environmental decision-support tools
Werner, F., Althaus, H. J., & Richter, K. (2002). Post-consumer wood in environmental decision-support tools. Schweizerische Zeitschrift für Forstwesen, 153(3), 97-106. https://doi.org/10.3188/szf.2002.0097
Application of the ESEM technique in wood research
Turkulin, H., Holzer, L., & Sell, J. (2003). Application of the ESEM technique in wood research. (Research and Work Report EMPA wood laboratory, Report No.: 115/51). Empa.
Application of the ESEM technique in wood research. Part II. Comparison of operational modes
Turkulin, H., Holzer, L., Richter, K., & Sell, J. (2005). Application of the ESEM technique in wood research. Part II. Comparison of operational modes. Wood and Fiber Science, 37(4), 565-573.
Developments in wood and packaging materials life cycle inventories in ecoinvent
Hischier, R., Althaus, H. J., & Werner, F. (2005). Developments in wood and packaging materials life cycle inventories in ecoinvent. International Journal of Life Cycle Assessment, 10(1), 50-58. https://doi.org/10.1065/lca2004.11.181.6
Application of the ESEM technique in wood research: part I. Optimization of imaging parameters and working conditions
Turkulin, H., Holzer, L., Richter, K., & Sell, J. (2005). Application of the ESEM technique in wood research: part I. Optimization of imaging parameters and working conditions. Wood and Fiber Science, 37(4), 552-564.
Post-consumer waste wood in attributive product LCA. context specific evaluation of allocation procedures in a functionalistic conception of LCA
Werner, F., Althaus, H. J., Richter, K., & Scholz, R. W. (2007). Post-consumer waste wood in attributive product LCA. context specific evaluation of allocation procedures in a functionalistic conception of LCA. International Journal of Life Cycle Assessment, 12(3), 160-172. https://doi.org/10.1065/lca2006.05.249
Wooden building products in comparative LCA. A literature review
Werner, F., & Richter, K. (2007). Wooden building products in comparative LCA. A literature review. International Journal of Life Cycle Assessment, 12(7), 470-479. https://doi.org/10.1065/lca2007.04.317
Combined particle emission reduction and heat recovery from combustion exhaust-A novel approach for small wood-fired appliances
Messerer, A., Schmatloch, V., Pöschl, U., & Niessner, R. (2007). Combined particle emission reduction and heat recovery from combustion exhaust-A novel approach for small wood-fired appliances. Biomass and Bioenergy, 31(7), 512-521. https://doi.org/10.1016/j.biombioe.2007.01.022
Studying sulfur functional groups in Norway spruce year rings using S L-edge total electron yield spectroscopy
Struis, R. P. W. J., Ludwig, C., Barrelet, T., Krähenbühl, U., & Rennenberg, H. (2008). Studying sulfur functional groups in Norway spruce year rings using S L-edge total electron yield spectroscopy. Science of the Total Environment, 403(1-3), 196-206. https://doi.org/10.1016/j.scitotenv.2008.05.034
Influence of the microstructure on the vapour transport in wood
Zillig, W., Carmeliet, J., & Derome, D. (2008). Influence of the microstructure on the vapour transport in wood. In C. Rode (Ed.), Proceedings of the 8th symposium on building physics in the nordic countries: Copenhagen, June 16-18, 2008 (p. (8 pp.). Technical University of Denmark.
Model for hysteretic moisture behaviour of wood
Derome, D., Derluyn, H., Zillig, W., & Carmeliet, J. (2008). Model for hysteretic moisture behaviour of wood. In C. Rode (Ed.), Proceedings of the 8th symposium on building physics in the nordic countries: Copenhagen, June 16-18, 2008 (pp. 959-965). https://doi.org/10.4122/1.1000000840
Options to tailor wood surface properties
Arnold, M. (2012). Options to tailor wood surface properties. In S. Wieland & T. Schnabel (Eds.), Cost Action FP1006. Bringing new functions to wood through surface modification. Programme and book of abstracts (pp. 29-31). Salzburg University of Applied Sciences.
Density, mechanical properties, and morphology of densified wood in relation to compression temperature and steam environments
Kutnar, A., Widmann, R., & Kamke, F. A. (2012). Density, mechanical properties, and morphology of densified wood in relation to compression temperature and steam environments. In D. Jones, H. Militz, M. Petrič, F. Pohleven, M. Humar, & M. Pavlič (Eds.), Proceedings of the sixth European conference on wood modification 2012, Ljubljana, Slovenia (pp. 167-174). University of Ljubljana.
Characterization of wood surface degradation using activation spectra approach
Živković, V., Arnold, M., Richter, K., & Turkulin, H. (2013). Characterization of wood surface degradation using activation spectra approach. In S. Medved & A. Kutnar (Eds.), Characterization of modified wood in relation to wood bonding and coating performance. Workshop proceedings (pp. 268-278). University of Ljubljana; University of Primorska.
Novel approach in analysis of light source effects to spectral sensitivity of fir wood surfaces
Živković, V., Arnold, M., Pandey, K. K., Richter, K., & Turkulin, H. (2013). Novel approach in analysis of light source effects to spectral sensitivity of fir wood surfaces. CEEES Publication No. 16. (p. (13 pp.). Presented at the 6th European weathering symposium natural and artificial ageing of polymers 2013. .