Active Filters

  • (-) Keywords ≠ piezoresistive material
  • (-) Publication Type = Conference Item
Search Results 1 - 20 of 290

Pages

  • RSS Feed
Select Page
SAM/AES analysis of grain boundaries in zirconia ceramics
Moser, E. M., Metzger, M., & Gauckler, L. J. (1994). SAM/AES analysis of grain boundaries in zirconia ceramics. Presented at the 8. Arbeitstagung angewandte Oberflächenanalytik (AOFA 8). Kaiserslautern.
Electrically conductive ceramic composites
van de Goor, G., Sägesser, P., & Berroth, K. (1996). Electrically conductive ceramic composites. Presented at the XIIIth international symposium on the reactivity of solids. Hamburg.
LCA and decision making - conclusions from a review and a case study about paper recycling
Reichart, I., Hischier, R., & Werner, F. (2002). LCA and decision making - conclusions from a review and a case study about paper recycling. Presented at the 12th annual meeting of SETAC Europe. Vienna, Austria.
Novel textile-based contact light diffuser for photodynamic therapy
Khan, T., Selm, B., Groenhoff, E., & Walt, H. (2005). Novel textile-based contact light diffuser for photodynamic therapy. Presented at the IPA biennial world congress. Munich, Germany.
Purified oxides with novel morphologies upon spark anodization of Ti-alloys
Kern, P., Michler, J., & Zinger, O. (2006). Purified oxides with novel morphologies upon spark anodization of Ti-alloys. Presented at the 20th European conference on biomaterials, ESB 2006. Nantes, France.
Prediction of impinging precursor molecule distribution for focused particle beam deposition and etching
Friedli, V., Utke, I., Michler, H., & Hoffmann, P. (2006). Prediction of impinging precursor molecule distribution for focused particle beam deposition and etching. Presented at the 50th international conference on electron, ion, and photon beam technology and nanofabrication (EIPBN 2006). Baltimore, Maryland, USA.
In-situ material testing devices and methods
Fahlbusch, S., Philippe, L., Moser, B., & Michler, J. (2006). In-situ material testing devices and methods. In johann.michler@empa.ch; stephan.fahlbusch@empa.ch. Stuttgart, Germany.
Bio-coatings with controlled porosity by electrophoretic deposition of TiO<sub>2-</sub>polystyrene composite particles
Radice, S., Kern, P., Dietsch, H., Dittmann, R., Michler, J., & Mischler, S. (2007). Bio-coatings with controlled porosity by electrophoretic deposition of TiO2-polystyrene composite particles. Presented at the 21st European conference on biomaterials (ESB 2007). Brighton, UK.
Mechanical and tribological investigations of new and locally refurbished WC-Co-Cr coatings (patent pending)
Hadad, M., Siegmann, S., Rohr, L., Hitzek, R., & Bürgler, P. (2007). Mechanical and tribological investigations of new and locally refurbished WC-Co-Cr coatings (patent pending). Presented at the Poster presented at the international thermal spray conference & exposition, ITSC 2007. Beijing, China.
Mechanical properties of Si and ZnO nanowires
Hoffmann, S., Michler, J., Fan, H., Schmidt, V., Zacharias, M., Christiansen, S., & Ballif, C. (2007). Mechanical properties of Si and ZnO nanowires. Presented at the Poster presented at the 397. WE-Heraeus-seminar, semiconducting nanowires: physics, materials and devices. Bad Honnef, Germany.
New tool for fast and precise chemical analysis of thin oxide layers: pulsed rf-glow-discharge time-of-flight mass spectrometry
Hohl, M., Nelis, T., Michler, J., Tanner, C., Gonin, M., & Fuhrer, K. (2007). New tool for fast and precise chemical analysis of thin oxide layers: pulsed rf-glow-discharge time-of-flight mass spectrometry. Presented at the 12th European conference on applications of surface and interface analysis (ECASIA 2007). Brussels, Belgium.
Mechanische und tribologische Untersuchungen an neuen und lokal aufgearbeiteten WC-Co-Cr Beschichtungen
Hadad, M., Siegmann, S., Rohr, L., Hitzek, R., & Buergler, P. (2007). Mechanische und tribologische Untersuchungen an neuen und lokal aufgearbeiteten WC-Co-Cr Beschichtungen. Presented at the Poster presented at the KTI / CTI medtech event 2007. Bern, Switzerland.
Focused electron beam induced etching and<em> in-situ</em> monitoring: fabrication of sub-beam sized nanoholes
Miyazoe, H., Utke, I., Michler, J., & Terashima, K. (2007). Focused electron beam induced etching and in-situ monitoring: fabrication of sub-beam sized nanoholes. Presented at the Poster presented at the 20th international microprocesses and nanotechnology conference. Kyoto, Japan.
Mass sensor for <em>in situ</em> monitoring of focused ion and electron beam induced processes
Friedli, V., Michler, H., Hoffmann, P., & Utke, I. (2007). Mass sensor for in situ monitoring of focused ion and electron beam induced processes. Presented at the Poster presented at the 23rd International Meeting of the Swiss Surface Analysis Community. Fribourg, Switzerland.
2CV.3.20: effect of strength test methods on silicon wafer strength measurements
Wasmer, K., Bidiville, A., Michler, J., Ballif, C., Van der Meer, M., & Nasch, P. (2007). 2CV.3.20: effect of strength test methods on silicon wafer strength measurements. Presented at the 22nd European photovoltaic solar energy & exhibition. Mailand, Italy.
Scaling laws for resolution in FEB induced deposition
Utke, I., Purrucker, M., Friedli, V., & Michler, J. (2007). Scaling laws for resolution in FEB induced deposition. Presented at the International conference on electron, ion, and photon beams and nanofabrication (EIPBN). Denver, USA.
Shape simulation in focused electron beam (FEB) induced deposition
Utke, I., Purrucker, M., Friedli, V., & Michler, J. (2007). Shape simulation in focused electron beam (FEB) induced deposition. Presented at the International conference on micro- and nanoengineering (MNE). Kopenhagen, Denmark.
2CV.3.19: Towards the correlation of mechanical properties and sawing parameters of silicon wafers
Bidiville, A., Wasmer, K., Michler, J., Ballif, C., Van der Meer, M., & Nasch, P. M. (2007). 2CV.3.19: Towards the correlation of mechanical properties and sawing parameters of silicon wafers. Presented at the Poster presented at the 22nd European Photovoltaic Solar Energy & Exhibition. Mailand, Italy.
Novel in-situ SEM nanoindentation system
Rzepiejewska-Malyska, K., Major, R., Cyrankowski, E., Buerki, G., Asif, S. A. S., & Michler, J. (2007). Novel in-situ SEM nanoindentation system. Presented at the 3nd PhD symposium 'exploring the future'. Dübendorf, Switzerland.
Nano-particle characterization by means of SEM and quantitative image analysis
Schmid, H., Leparoux, M., Schreuders, C., & Dvorak, M. (2007). Nano-particle characterization by means of SEM and quantitative image analysis. Presented at the POWTECH with PARTEC congress, 2007. Nürnberg, Germany.
 

Pages