Active Filters

  • (-) Empa Laboratories = 303 Structural Engineering
  • (-) Empa Authors ≠ Ghafoori, Elyas
Search Results 1 - 20 of 523

Pages

  • RSS Feed
Select Page
A wireless sensor network for force monitoring of cable stays
Feltrin, G., Meyer, J., Bischoff, R., & Saukh, O. (2006). A wireless sensor network for force monitoring of cable stays (pp. 277-284). Presented at the IABMAS 3rd International Conference on Bridge Maintenance, Safety and Management. .
Bond test concept for strands in post-tensioned concrete members
Ullner, R. (2006). Bond test concept for strands in post-tensioned concrete members (p. 7 pp.). Presented at the 6th International PhD Symposium in Civil Engineering. .
Iranian existing steel buildings: state of the practice. Part 2: Engineered practices
Shafei, B., Lestuzzi, P., Motavalli, M., & Mirghaderi, S. R. (2006). Iranian existing steel buildings: state of the practice. Part 2: Engineered practices (p. 10 pp.). Presented at the First European Conference on Earthquake Engineering and Seismology (Joint event of the 13th ECEE & 30th General Assembly of the ESC), Paper number 1780. .
Berechnungsmodelle für mehrschichtige Massivholzplatten
Gülzow, A., Steiger, R., Czaderski, C., & Olia, S. (2006). Berechnungsmodelle für mehrschichtige Massivholzplatten (p. 4 pp.). Presented at the SAH Statusseminar und Präsentation KTI-Projekt. .
Analytical models for strengthening of square RC columns with CFRP
Zarafshan, A., Motavalli, M., & Huth, O. (2006). Analytical models for strengthening of square RC columns with CFRP (p. 8 pp.). Presented at the First European Conference on Earthquake Engineering and Seismology (Joint event of the 13th ECEE & 30th General Assembly of the ESC), Paper number 422. .
Iranian existing steel buildings: state of the practice. Part 1: Non-engineered practices
Shafei, B., Lestuzzi, P., Motavalli, M., & Mirghaderi, S. R. (2006). Iranian existing steel buildings: state of the practice. Part 1: Non-engineered practices (p. 10 pp.). Presented at the First European Conference on Earthquake Engineering and Seismology (Joint event of the 13th ECEE & 30th General Assembly of the ESC), Paper number 1779. .
Fatigue of tubular bridge joints using welded or cast steel node solutions
Schumacher, A., Nussbaumer, A., Haldimann-Sturm, S., & Walbridge, S. (2006). Fatigue of tubular bridge joints using welded or cast steel node solutions (p. 11 pp.). Presented at the 7th International Conference on Short and Medium Span Bridges. .
Untersuchungen zur Ausbreitung von Ultraschallwellen in Holzstämmen
Bächle, F., & Schubert, S. (2006). Untersuchungen zur Ausbreitung von Ultraschallwellen in Holzstämmen (p. 3 pp.). Presented at the SAH Statusseminar und Präsentation KTI-Projekt. .
Identification of elastic material properties of solid wood panels
Schubert, S., Gsell, D., Feltrin, G., Gülzow, A., & Steiger, R. (2006). Identification of elastic material properties of solid wood panels (pp. 59-68). Presented at the 2nd International Symposium on Advanced Timber and Timber-Composite Elements for Buildings, Acoustic Performance and Low Frequency Vibration. .
Seismic evaluation of a commercial building according to SIA 2018 using a displacement-based assessment
Pfyl-Lang, K., Zwicky, P., & Kerland, G. (2006). Seismic evaluation of a commercial building according to SIA 2018 using a displacement-based assessment (p. 8 pp.). Presented at the First European Conference on Earthquake Engineering and Seismology (Joint event of the 13th ECEE & 30th General Assembly of the ESC), Paper number 327. .
ESPI-measurement of a strain gradients in a CFRP-reinforced bending beam
Hack, E., & Schumacher, A. (2006). ESPI-measurement of a strain gradients in a CFRP-reinforced bending beam (p. 2 pp.). Presented at the Photomechanics 2006, International Conference on Full-Field Measurement Techniques and their Applications in Experimental Solid Mechanics. .
Seismic assessment and retrofitting proposal of the tallest hotel in Tehran
Motavalli, M., & Beigi, B. (2006). Seismic assessment and retrofitting proposal of the tallest hotel in Tehran. In Proceedings of the 2nd International Congress, Fédération Internationale du Béton, Session 9, Seismic Evaluation of Concrete Structures (p. 10 pp.).
3-Dimensional FE-modeling of CFRP L-shaped plates glued on concrete block
Nemati, N., Czaderski, C., & Motavalli, M. (2006). 3-Dimensional FE-modeling of CFRP L-shaped plates glued on concrete block. IABSE Report: Vol. 92. (p. 7 pp.). Presented at the IABSE Report, Vol. 92, Responding to Tomorrow's Challenges in Structural Engineering, IABSE 2006 Symposium. .
Forschung an der EMPA - Dynamische Versuche zur Ermittlung der Steifigkeiten von Brettsperrholz-Plattenstrukturen
Gsell, D., Schubert, S., Feltrin, G., Gülzow, A., & Steiger, R. (2006). Forschung an der EMPA - Dynamische Versuche zur Ermittlung der Steifigkeiten von Brettsperrholz-Plattenstrukturen (pp. D1-D10). Presented at the 5. Grazer Holzbau-Fachtagung: Brettsperrholz - Ein Blick auf Forschung und Entwicklung. .
Bond behavior of seven-wire strands for post-tensioning
Ullner, R. (2006). Bond behavior of seven-wire strands for post-tensioning (p. 7 pp.). Presented at the Empa PhD Symposium 2006. .
Forschung an der EMPA - Statische Versuche an BSP-Plattenstrukturen
Czaderski, C., Olia, S., & Steiger, R. (2006). Forschung an der EMPA - Statische Versuche an BSP-Plattenstrukturen (pp. E1-E8). Presented at the 5. Grazer Holzbau-Fachtagung: Brettsperrholz - Ein Blick auf Forschung und Entwicklung. .
Seismic vulnerability functions for Switzerland
Pfyl-Lang, K., Zwicky, P., Kind, F., & Zbinden, A. (2006). Seismic vulnerability functions for Switzerland (p. 9 pp.). Presented at the First European Conference on Earthquake Engineering and Seismology (Joint event of the 13th ECEE & 30th General Assembly of the ESC), Paper number 331. .
Position controlled diamagnetic linear conveyor
Barrot, F., Burns, B., Chapuis, D., Bosgiraud, T., & Bleuler, H. (2006). Position controlled diamagnetic linear conveyor (p. 7 pp.). Presented at the 10th International Symposium on Magnetic Bearings. .
A low power wireless sensor network for structural health monitoring
Meyer, J., Bischoff, R., Feltrin, G., & Saukh, O. (2006). A low power wireless sensor network for structural health monitoring (pp. 671-678). Presented at the IABMAS 3rd International Conference on Bridge Maintenance, Safety and Management. .
Fatigue of bridge joints using welded tubes or cast steel node solutions
Nussbaumer, A., Haldimann-Sturm, S. C., & Schumacher, A. (2006). Fatigue of bridge joints using welded tubes or cast steel node solutions (p. 8 pp.). Presented at the 11th International Symposum and IIW International Conference on Tubular Structures. .
 

Pages