Active Filters

  • (-) Empa Laboratories = 201 High Performance Ceramics
Search Results 1 - 20 of 706

Pages

  • RSS Feed
Select Page
Influence of tensile edge design and printing parameters on the flexural strength of ZrO<sub>2</sub> and ATZ bars prepared by UV-LCM-DLP
Borlaf, M., Conti, L., & Graule, T. (2021). Influence of tensile edge design and printing parameters on the flexural strength of ZrO2 and ATZ bars prepared by UV-LCM-DLP. Open Ceramics, 5, 100066 (5 pp.). https://doi.org/10.1016/j.oceram.2021.100066
Circular economy: national and global policy—overview
Braun, A., & Toth, R. (2021). Circular economy: national and global policy—overview. Clean Technologies and Environmental Policy, 23, 301-304. https://doi.org/10.1007/s10098-020-01988-8
From inert gas to fertilizer, fuel and fine chemicals: N<sub>2</sub> reduction and fixation
Braun, A., Bora, D. K., Lauterbach, L., Lettau, E., Wang, H., Cramer, S. P., … Guo, J. (2021). From inert gas to fertilizer, fuel and fine chemicals: N2 reduction and fixation. Catalysis Today. https://doi.org/10.1016/j.cattod.2021.04.020
Solar energy and the circular economy: an introduction
Braun, A., Toth, R., & Erat, S. (2021). Solar energy and the circular economy: an introduction. MRS Energy and Sustainability: A Review Journal. https://doi.org/10.1557/s43581-021-00003-x
2D printing of piezoresistive auxetic silicone sensor structures
Clemens, F., Melnykowycz, M., Bär, F., Goldenstein, D., & Georgopoulou, A. (2021). 2D printing of piezoresistive auxetic silicone sensor structures. IEEE Robotics and Automation Letters, 6(2), 2541-2546. https://doi.org/10.1109/LRA.2021.3062000
Debinding and sintering of dense ceramic structures made with fused deposition modeling
Clemens, F., Schulz, J., Gorjan, L., Liersch, A., Sebastian, T., & Sarraf, F. (2021). Debinding and sintering of dense ceramic structures made with fused deposition modeling. In M. Meboldt & C. Klahn (Eds.), Industrializing additive manufacturing. Proceedings of AMPA2020 (pp. 293-303). https://doi.org/10.1007/978-3-030-54334-1_21
Carbon- and copper- based composites for virus removal from water
Domagała, K. (2021). Carbon- and copper- based composites for virus removal from water [Doctoral dissertation]. AGH University of Science and Technology.
Study on crystallographic and electronic structure of micrometre-scale ZnO and ZnO:B rods via X-ray absorption fine-structure spectroscopy
Erat, S., Ozkendir, O. M., Yildirimcan, S., Gunaydin, S., Harfouche, M., Demir, B., & Braun, A. (2021). Study on crystallographic and electronic structure of micrometre-scale ZnO and ZnO:B rods via X-ray absorption fine-structure spectroscopy. Journal of Synchrotron Radiation, 28, 448-454. https://doi.org/10.1107/S1600577520015866
Process characterization and analysis of ceramic powder bed fusion
Florio, K., Puccio, D., Viganò, G., Pfeiffer, S., Verga, F., Grasso, M., … Wegener, K. (2021). Process characterization and analysis of ceramic powder bed fusion. International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-021-07625-y
Multi-material 3D printing of thermoplastic elastomers for development of soft robotic structures with integrated sensor elements
Georgopoulou, A., Vanderborght, B., & Clemens, F. (2021). Multi-material 3D printing of thermoplastic elastomers for development of soft robotic structures with integrated sensor elements. In M. Meboldt & C. Klahn (Eds.), Industrializing additive manufacturing. Proceedings of AMPA2020 (pp. 67-81). https://doi.org/10.1007/978-3-030-54334-1_6
Piezoresistive sensor fiber composites based on silicone elastomers for the monitoring of the position of a robot arm
Georgopoulou, A., Michel, S., Vanderborght, B., & Clemens, F. (2021). Piezoresistive sensor fiber composites based on silicone elastomers for the monitoring of the position of a robot arm. Sensors and Actuators A: Physical, 318, 112433 (11 pp.). https://doi.org/10.1016/j.sna.2020.112433
Sensorized robotic skin based on piezoresistive sensor fiber composites produced with injection molding of liquid silicone
Georgopoulou, A., Michel, S., & Clemens, F. (2021). Sensorized robotic skin based on piezoresistive sensor fiber composites produced with injection molding of liquid silicone. Polymers, 13(8), 1226 (16 pp.). https://doi.org/10.3390/polym13081226
Millisecond photonic sintering of iron oxide doped alumina ceramic coatings
Gilshtein, E., Pfeiffer, S., Rossell, M. D., Sastre, J., Gorjan, L., Erni, R., … Romanyuk, Y. E. (2021). Millisecond photonic sintering of iron oxide doped alumina ceramic coatings. Scientific Reports, 11(1), 3536 (10 pp.). https://doi.org/10.1038/s41598-021-82896-9
Characterization and estimation of dielectric constant of electrospun BaTiO&lt;sub&gt;3&lt;/sub&gt; nanofibers at different calcination temperatures using theoretical models
Hedayati, M., Taheri-Nassaj, E., Yourdkhani, A., Borlaf, M., Rasekh, S., Amirkhizi, P., … Clemens, F. J. (2021). Characterization and estimation of dielectric constant of electrospun BaTiO3 nanofibers at different calcination temperatures using theoretical models. Journal of the European Ceramic Society, 41(2), 1299-1309. https://doi.org/10.1016/j.jeurceramsoc.2020.09.072
Function and electronic structure of the SnO<sub>2</sub> buffer layer between the <em>α</em>-Fe<sub>2</sub>O<sub>3</sub> water oxidation photoelectrode and the transparent conducting oxide current collector
Hu, Y., Boudoire, F., Mayer, M. T., Yoon, S., Graetzel, M., & Braun, A. (2021). Function and electronic structure of the SnO2 buffer layer between the α-Fe2O3 water oxidation photoelectrode and the transparent conducting oxide current collector. Journal of Physical Chemistry C, 125(17), 9158-9168. https://doi.org/10.1021/acs.jpcc.1c01809
Electrochemical performance of polymer-derived SiOC and SiTiOC ceramic electrodes for artificial cardiac pacemaker applications
Jang, J., Warriam Sasikumar, P. V., Navaee, F., Hagelüken, L., Blugan, G., & Brugger, J. (2021). Electrochemical performance of polymer-derived SiOC and SiTiOC ceramic electrodes for artificial cardiac pacemaker applications. Ceramics International, 47(6), 7593-7601. https://doi.org/10.1016/j.ceramint.2020.11.098
Oxygen evolution reaction activity and underlying mechanism of perovskite electrocatalysts at different pH
Kim, B. J., Fabbri, E., Borlaf, M., Abbott, D. F., Castelli, I. E., Nachtegaal, M., … Schmidt, T. J. (2021). Oxygen evolution reaction activity and underlying mechanism of perovskite electrocatalysts at different pH. Materials Advances, 2(1), 345-355. https://doi.org/10.1039/D0MA00661K
Effect of loading and heating history on deformation of LaCoO<sub>3</sub>
Lugovy, M., Verbylo, D., Orlovskaya, N., Reece, M., Kuebler, J., Graule, T., & Blugan, G. (2021). Effect of loading and heating history on deformation of LaCoO3. Materials, 14(13), 3543 (15 pp.). https://doi.org/10.3390/ma14133543
Direct laser additive manufacturing of high performance oxide ceramics: a state-of-the-art review
Pfeiffer, S., Florio, K., Puccio, D., Grasso, M., Colosimo, B. M., Aneziris, C. G., … Graule, T. (2021). Direct laser additive manufacturing of high performance oxide ceramics: a state-of-the-art review. Journal of the European Ceramic Society. https://doi.org/10.1016/j.jeurceramsoc.2021.05.035
Effect of MgO sintering additive on mullite structures manufactured by fused deposition modeling (FDM) technology
Sarraf, F., Abbatinali, E., Gorjan, L., Sebastian, T., Colombo, P., Churakov, S. V., & Clemens, F. (2021). Effect of MgO sintering additive on mullite structures manufactured by fused deposition modeling (FDM) technology. Journal of the European Ceramic Society. https://doi.org/10.1016/j.jeurceramsoc.2021.06.012
 

Pages