Active Filters

  • (-) Journal = Materials and Design
  • (-) Empa Laboratories ≠ 401 Biomimetic Membranes and Textiles
Search Results 1 - 20 of 58
Select Page
Influence of sodium nitrate on the phases formed in the MgO-Al<sub>2</sub>O<sub>3</sub>-SiO<sub>2</sub>-H<sub>2</sub>O system
Bernard, E., Lothenbach, B., & Rentsch, D. (2021). Influence of sodium nitrate on the phases formed in the MgO-Al2O3-SiO2-H2O system. Materials and Design, 198, 109391 (13 pp.). https://doi.org/10.1016/j.matdes.2020.109391
Microstructure and defects in a Ni-Cr-Al-Ti γ/γ' model superalloy processed by laser powder bed fusion
De Luca, A., Kenel, C., Griffiths, S., Joglekar, S. S., Leinenbach, C., & Dunand, D. C. (2021). Microstructure and defects in a Ni-Cr-Al-Ti γ/γ' model superalloy processed by laser powder bed fusion. Materials and Design, 201, 109531 (14 pp.). https://doi.org/10.1016/j.matdes.2021.109531
{101<sup>-</sup>2} twinning mechanism during <em>in situ</em> micro-tensile loading of pure Mg: Role of basal slip and twin-twin interactions
Della Ventura, N. M., Kalácska, S., Casari, D., Edwards, T. E. J., Sharma, A., Michler, J., … Maeder, X. (2021). {101-2} twinning mechanism during in situ micro-tensile loading of pure Mg: Role of basal slip and twin-twin interactions. Materials and Design, 197, 109206 (15 pp.). https://doi.org/10.1016/j.matdes.2020.109206
Adhesion evaluation of thin films to dielectrics in multilayer stacks: a comparison of four-point bending and stressed overlayer technique.
Lassnig, A., Putz, B., Hirn, S., Többens, D. M., Mitterer, C., & Cordill, M. J. (2021). Adhesion evaluation of thin films to dielectrics in multilayer stacks: a comparison of four-point bending and stressed overlayer technique. Materials and Design, 200, 109451 (8 pp.). https://doi.org/10.1016/j.matdes.2021.109451
Primary creep regeneration in 10%Cr martensitic steel: <em>in-situ</em> and <em>ex-situ</em> microstructure studies
Li, X., Holdsworth, S. R., Kalácska, S., Balogh, L., Park, J. S., Sologubenko, A. S., … Hosseini, E. (2021). Primary creep regeneration in 10%Cr martensitic steel: in-situ and ex-situ microstructure studies. Materials and Design, 199, 109405 (13 pp.). https://doi.org/10.1016/j.matdes.2020.109405
The dark side of fungal competition and resource capture in wood: zone line spalting from science to application
Morris, H., Smith, K. T., Robinson, S. C., Göttelmann, M., Fink, S., & Schwarze, F. W. M. R. (2021). The dark side of fungal competition and resource capture in wood: zone line spalting from science to application. Materials and Design, 201, 109480 (14 pp.). https://doi.org/10.1016/j.matdes.2021.109480
Alkyl sulfone bridged phosphorus flame-retardants for polypropylene
Nazir, R., Gooneie, A., Lehner, S., Jovic, M., Rupper, P., Ott, N., … Gaan, S. (2021). Alkyl sulfone bridged phosphorus flame-retardants for polypropylene. Materials and Design, 200, 109459 (12 pp.). https://doi.org/10.1016/j.matdes.2021.109459
Template-free synthesis of hybrid silica nanoparticle with functionalized mesostructure for efficient methylene blue removal
Parida, D., Salmeia, K. A., Sadeghpour, A., Zhao, S., Maurya, A. K., Assaf, K. I., … Gaan, S. (2021). Template-free synthesis of hybrid silica nanoparticle with functionalized mesostructure for efficient methylene blue removal. Materials and Design, 201, 109494 (10 pp.). https://doi.org/10.1016/j.matdes.2021.109494
Harnessing nano oil reservoir network for generating low friction and wear in self-mating alumina
Rowthu, S., Deshpande, P., Annamalai, A., & Hoffmann, P. (2021). Harnessing nano oil reservoir network for generating low friction and wear in self-mating alumina. Materials and Design, 206, 109821 (13 pp.). https://doi.org/10.1016/j.matdes.2021.109821
Characterization, mechanical properties and dimensional accuracy of a Zr-based bulk metallic glass manufactured via laser powder-bed fusion
Sohrabi, N., Jhabvala, J., Kurtuldu, G., Stoica, M., Parrilli, A., Berns, S., … Logé, R. E. (2021). Characterization, mechanical properties and dimensional accuracy of a Zr-based bulk metallic glass manufactured via laser powder-bed fusion. Materials and Design, 199, 109400 (14 pp.). https://doi.org/10.1016/j.matdes.2020.109400
Smooth or not: robust fused silica micro-components by femtosecond-laser-assisted etching
Widmer, R. N., Bischof, D., Jurczyk, J., Michler, M., Schwiedrzik, J., & Michler, J. (2021). Smooth or not: robust fused silica micro-components by femtosecond-laser-assisted etching. Materials and Design, 204, 109670 (9 pp.). https://doi.org/10.1016/j.matdes.2021.109670
Ultrastrong nanocrystalline binary alloys discovered via high-throughput screening of the CoCr system
Wieczerzak, K., Nowicka, O., Michalski, S., Edwards, T. E. J., Jain, M., Xie, T., … Michler, J. (2021). Ultrastrong nanocrystalline binary alloys discovered via high-throughput screening of the CoCr system. Materials and Design, 205, 109710 (16 pp.). https://doi.org/10.1016/j.matdes.2021.109710
Novel micro-scale specimens for mode-dependent fracture testing of brittle materials: a case study on GaAs single crystals
Ast, J., Schwiedrzik, J. J., Rohbeck, N., Maeder, X., & Michler, J. (2020). Novel micro-scale specimens for mode-dependent fracture testing of brittle materials: a case study on GaAs single crystals. Materials and Design, 193, 108765 (11 pp.). https://doi.org/10.1016/j.matdes.2020.108765
Neutron dark-field imaging applied to porosity and deformation-induced phase transitions in additively manufactured steels
Bacak, M., Valsecchi, J., Čapek, J., Polatidis, E., Kaestner, A., Arabi-Hashemi, A., … Strobl, M. (2020). Neutron dark-field imaging applied to porosity and deformation-induced phase transitions in additively manufactured steels. Materials and Design, 195, 109009 (9 pp.). https://doi.org/10.1016/j.matdes.2020.109009
Stainless steel-like FeCrNi nanostructures <em>via</em> electrodeposition into AAO templates using a mixed-solvent Cr(III)-based electrolyte
Bertero, E., Manzano, C. V., Bürki, G., & Philippe, L. (2020). Stainless steel-like FeCrNi nanostructures via electrodeposition into AAO templates using a mixed-solvent Cr(III)-based electrolyte. Materials and Design, 190, 108559 (7 pp.). https://doi.org/10.1016/j.matdes.2020.108559
Fracture toughness determination of fused silica by cube corner indentation cracking and pillar splitting
Bruns, S., Petho, L., Minnert, C., Michler, J., & Durst, K. (2020). Fracture toughness determination of fused silica by cube corner indentation cracking and pillar splitting. Materials and Design, 186, 108311 (8 pp.). https://doi.org/10.1016/j.matdes.2019.108311
Fracture properties of thin film TiN at elevated temperatures
Buchinger, J., Löfler, L., Ast, J., Wagner, A., Chen, Z., Michler, J., … Bartosik, M. (2020). Fracture properties of thin film TiN at elevated temperatures. Materials and Design, 194, 108885 (10 pp.). https://doi.org/10.1016/j.matdes.2020.108885
Size-dependent plasticity and activation parameters of lithographically-produced silicon micropillars
Chen, M., Wehrs, J., Sologubenko, A. S., Rabier, J., Michler, J., & Wheeler, J. M. (2020). Size-dependent plasticity and activation parameters of lithographically-produced silicon micropillars. Materials and Design, 189, 108506 (13 pp.). https://doi.org/10.1016/j.matdes.2020.108506
Liquid-core polymer optical fibers for luminescent waveguide applications
Jakubowski, K., Kerkemeyer, W., Perret, E., Heuberger, M., & Hufenus, R. (2020). Liquid-core polymer optical fibers for luminescent waveguide applications. Materials and Design, 196, 109131 (10 pp.). https://doi.org/10.1016/j.matdes.2020.109131
Moisture stability of crystalline alkali-silica reaction products formed in concrete exposed to natural environment
Leemann, A., Shi, Z., Wyrzykowski, M., & Winnefeld, F. (2020). Moisture stability of crystalline alkali-silica reaction products formed in concrete exposed to natural environment. Materials and Design, 195, 109066 (9 pp.). https://doi.org/10.1016/j.matdes.2020.109066