Active Filters

  • (-) Journal = Wear
Search Results 1 - 20 of 21
Select Page
Acoustic emission and machine learning based classification of wear generated using a pin-on-disc tribometer equipped with a digital holographic microscope
Deshpande, P., Pandiyan, V., Meylan, B., & Wasmer, K. (2021). Acoustic emission and machine learning based classification of wear generated using a pin-on-disc tribometer equipped with a digital holographic microscope. Wear, 203622 (12 pp.). https://doi.org/10.1016/j.wear.2021.203622
Effects of laser surface texturing on the wear and failure mechanism of grey cast iron reciprocating against steel under starved lubrication conditions
Saeidi, F., Parlinska-Wojtan, M., Hoffmann, P., & Wasmer, K. (2017). Effects of laser surface texturing on the wear and failure mechanism of grey cast iron reciprocating against steel under starved lubrication conditions. Wear, 386-387, 29-38. https://doi.org/10.1016/j.wear.2017.05.015
Brittle to ductile transition of tribomaterial in relation to wear response at high temperatures
Viat, A., Guillonneau, G., Fouvry, S., Kermouche, G., Sao Joao, S., Wehrs, J., … Henne, J. F. (2017). Brittle to ductile transition of tribomaterial in relation to wear response at high temperatures. Wear, 392-393, 60-68. https://doi.org/10.1016/j.wear.2017.09.015
A simple, fast and low-cost method for in situ monitoring of topographical changes and wear rate of a complex tribo-system under mixed lubrication
Meylan, B., Dogan, P., Sage, D., & Wasmer, K. (2016). A simple, fast and low-cost method for in situ monitoring of topographical changes and wear rate of a complex tribo-system under mixed lubrication. Wear, 364-365, 22-30. https://doi.org/10.1016/j.wear.2016.06.006
Effect of surface texturing on cast iron reciprocating against steel under starved lubrication conditions: a parametric study
Saeidi, F., Meylan, B., Hoffmann, P., & Wasmer, K. (2016). Effect of surface texturing on cast iron reciprocating against steel under starved lubrication conditions: a parametric study. Wear, 348-349, 17-26. https://doi.org/10.1016/j.wear.2015.10.020
Study of the friction mechanisms of pile surfaces: measurement conditions and pile surface properties
Tourlonias, M., Bueno, M. A., Bocquet, R., Rossi, R., & Derler, S. (2015). Study of the friction mechanisms of pile surfaces: measurement conditions and pile surface properties. Wear, 328-329, 100-109. https://doi.org/10.1016/j.wear.2015.01.039
Low friction multi-lobed seal for pneumatic actuators
Belforte, G., Conte, M., & Mazza, L. (2014). Low friction multi-lobed seal for pneumatic actuators. Wear, 320, 7-15. https://doi.org/10.1016/j.wear.2014.08.008
Study of friction mechanisms of hairy textile fabrics
Bueno, M. A., Bocquet, R., Tourlonias, M., Rossi, R. M., & Derler, S. (2013). Study of friction mechanisms of hairy textile fabrics. Wear, 303(1-2), 343-353. https://doi.org/10.1016/j.wear.2013.03.035
Stick-slip phenomena in the friction of human skin
Derler, S., & Rotaru, G. M. (2013). Stick-slip phenomena in the friction of human skin. Wear, 301(1-2), 324-329. https://doi.org/10.1016/j.wear.2012.11.030
Brush model to predict the friction of hairy textile fabrics from indentation measurements
Camillieri, B., Bueno, M. A., Rossi, R. M., & Derler, S. (2012). Brush model to predict the friction of hairy textile fabrics from indentation measurements. Wear, 296(1-2), 519-527. https://doi.org/10.1016/j.wear.2012.07.027
Chromite vs. magnetite as an erodent for coatings to be applied in steam turbines
Wellmann, R. G., & Graça, S. (2012). Chromite vs. magnetite as an erodent for coatings to be applied in steam turbines. Wear, 296(1-2), 479-483. https://doi.org/10.1016/j.wear.2012.08.014
Experiments and modelling of skin-knitted fabric friction
Baussan, E., Bueno, M. A., Rossi, R. M., & Derler, S. (2010). Experiments and modelling of skin-knitted fabric friction. Wear, 268(9-10), 1103-1110. https://doi.org/10.1016/j.wear.2010.01.010
Influence of surface microstructure on the sliding friction of plantar skin against hard substrates
Derler, S., Huber, R., Feuz, H. P., & Hadad, M. (2009). Influence of surface microstructure on the sliding friction of plantar skin against hard substrates. Wear, 267(5-8), 1281-1288. https://doi.org/10.1016/j.wear.2008.12.053
Tribological behaviour of thermally sprayed Ti-Cr-Si coatings
Hadad, M., Bandyopadhyay, P. P., Michler, J., & Lesage, J. (2009). Tribological behaviour of thermally sprayed Ti-Cr-Si coatings. Wear, 267(5-8), 1002-1008. https://doi.org/10.1016/j.wear.2009.01.013
Tribofilm formation from ZnDTP on diamond-like carbon
Equey, S., Roos, S., Mueller, U., Hauert, R., Spencer, N. D., & Crockett, R. (2008). Tribofilm formation from ZnDTP on diamond-like carbon. Wear, 264(3-4), 316-321. https://doi.org/10.1016/j.wear.2007.03.012
Tribology of human skin and mechanical skin equivalents in contact with textiles
Derler, S., Schrade, U., & Gerhardt, L. C. (2007). Tribology of human skin and mechanical skin equivalents in contact with textiles. Wear, 263(7-12), 1112-1116. https://doi.org/10.1016/j.wear.2006.11.031
Wear performance of sandwich structured WC-Co-Cr thermally sprayed coatings using different intermediate layers
Hadad, M., Hitzek, R., Buergler, P., Rohr, L., & Siegmann, S. (2007). Wear performance of sandwich structured WC-Co-Cr thermally sprayed coatings using different intermediate layers. Wear, 263(1-6), 691-699. https://doi.org/10.1016/j.wear.2006.12.057
Tribological behaviour Of Si<SUB>3</SUB>N<SUB>4</SUB> and Si<SUB>3</SUB>N<SUB>4</SUB>-%TiN based composites and multi-layer laminates
Hadad, M., Blugan, G., Kübler, J., Rosset, E., Rohr, L., & Michler, J. (2006). Tribological behaviour Of Si3N4 and Si3N4-%TiN based composites and multi-layer laminates. Wear, 260(6), 634-641. https://doi.org/10.1016/j.wear.2005.03.027
Investigation of wear mechanisms through in situ observation during microscratching inside the scanning electron microscope
Michler, J., Rabe, R., Bucaille, J. L., Moser, B., Schwaller, P., & Breguet, J. M. (2005). Investigation of wear mechanisms through in situ observation during microscratching inside the scanning electron microscope. Wear, 259(1-6), 18-26. https://doi.org/10.1016/j.wear.2005.02.111
Tribochemical reaction on metal-on-metal hip joint bearings. A comparison between in-vitro and in-vivo results
Wimmer, M. A., Sprecher, C., Hauert, R., Täger, G., & Fischer, A. (2003). Tribochemical reaction on metal-on-metal hip joint bearings. A comparison between in-vitro and in-vivo results. Wear, 255(7-12), 1007-1014. https://doi.org/10.1016/S0043-1648(03)00127-3