Active Filters

  • (-) Keywords = mechanical properties
Search Results 1 - 20 of 151

Pages

  • RSS Feed
Select Page
Enhanced mechanical properties and microstructural stability of ultrafine-grained biodegradable Zn–Li–Mn–Mg–Cu alloys produced by rapid solidification and high-pressure torsion
Bednarczyk, W., Wątroba, M., Cieślak, G., Ciemiorek, M., Hamułka, K., Schreiner, C., … Langdon, T. G. (2024). Enhanced mechanical properties and microstructural stability of ultrafine-grained biodegradable Zn–Li–Mn–Mg–Cu alloys produced by rapid solidification and high-pressure torsion. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 892, 146027 (16 pp.). https://doi.org/10.1016/j.msea.2023.146027
Microstructural engineering in carbon steel walls printed by directed energy deposition to enhance mechanical properties through heat-input control
Khebreh Farshchi, Y., Khodabakhshi, F., Mohri, M., Shirazi, H., & Nili-Ahmadabadi, M. (2024). Microstructural engineering in carbon steel walls printed by directed energy deposition to enhance mechanical properties through heat-input control. Journal of Materials Research and Technology, 28, 490-499. https://doi.org/10.1016/j.jmrt.2023.11.280
Superhard oxidation-resistant Ti<sub>1-x</sub>Al<sub>x</sub>B<sub>y</sub> thin films grown by hybrid HiPIMS/DCMS co-sputtering diboride targets without external substrate heating
Wicher, B., Pshyk, O. V., Li, X., Bakhit, B., Rogoz, V., Petrov, I., … Greczynski, G. (2024). Superhard oxidation-resistant Ti1-xAlxBy thin films grown by hybrid HiPIMS/DCMS co-sputtering diboride targets without external substrate heating. Materials and Design, 238, 112727 (14 pp.). https://doi.org/10.1016/j.matdes.2024.112727
Screw extrusion additive manufacturing of carbon fiber reinforced PA6 tools
Barera, G., Dul, S., & Pegoretti, A. (2023). Screw extrusion additive manufacturing of carbon fiber reinforced PA6 tools. Journal of Materials Engineering and Performance, 32, 9579-9597. https://doi.org/10.1007/s11665-023-08238-0
Microstructure, mechanical properties, and corrosion behavior of a biodegradable Zn-1.7Mg-1Ca alloy processed by KoBo extrusion
Kalhor, A., Rodak, K., Tkocz, M., Myalska-Głowacka, H., Chmiela, B., Wątroba, M., … Junak, G. (2023). Microstructure, mechanical properties, and corrosion behavior of a biodegradable Zn-1.7Mg-1Ca alloy processed by KoBo extrusion. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 887, 145771 (15 pp.). https://doi.org/10.1016/j.msea.2023.145771
Mechanical properties of Norway spruce (<em>Picea abies</em>) infested by the bark beetle (<em>Ips typographus</em>)
Künniger, T., Elsener, R., Heeb, M., & Huch, A. (2023). Mechanical properties of Norway spruce (Picea abies) infested by the bark beetle (Ips typographus). Wood Material Science and Engineering. https://doi.org/10.1080/17480272.2023.2226644
<em>In situ</em> fragmentation of Al/Al<sub>2</sub>O<sub>3</sub> multilayers on flexible substrates in biaxial tension
Putz, B., Edwards, T. E. J., Huszar, E., Pethö, L., Kreiml, P., Cordill, M. J., … Michler, J. (2023). In situ fragmentation of Al/Al2O3 multilayers on flexible substrates in biaxial tension. Materials and Design, 232, 112081 (15 pp.). https://doi.org/10.1016/j.matdes.2023.112081
Electromechanical behavior of Al/Al<sub>2</sub>O<sub>3</sub> multilayers on flexible substrates: insights from in situ film stress and resistance measurements
Putz, B., Edwards, T. E. J., Huszar, E., Gruber, P. A., Gradwohl, K. P., Kreiml, P., … Michler, J. (2023). Electromechanical behavior of Al/Al2O3 multilayers on flexible substrates: insights from in situ film stress and resistance measurements. Advanced Engineering Materials, 25(2), 2200951 (15 pp.). https://doi.org/10.1002/adem.202200951
Heat treatment response and mechanical properties of a Zr-modified AA2618 aluminum alloy fabricated by laser powder bed fusion
Schuster, M., De Luca, A., Kucajda, D., Hosseini, E., Widmer, R., Maeder, X., & Leinenbach, C. (2023). Heat treatment response and mechanical properties of a Zr-modified AA2618 aluminum alloy fabricated by laser powder bed fusion. Journal of Alloys and Compounds, 962, 171166 (14 pp.). https://doi.org/10.1016/j.jallcom.2023.171166
Use of modified deep eutectic solvent as an additional chemical in a flexible conductive natural rubber sensor for motion analysis
Sripornsawat, B., Georgopoulou, A., Tulaphol, S., Thitithammawong, A., Johns, J., Nakaramontri, Y., & Clemens, F. (2023). Use of modified deep eutectic solvent as an additional chemical in a flexible conductive natural rubber sensor for motion analysis. eXPRESS Polymer Letters, 17(1), 69-89. https://doi.org/10.3144/expresspolymlett.2023.6
Multiscale mechanical analysis of the elastic modulus of skin
Wahlsten, A., Stracuzzi, A., Lüchtefeld, I., Restivo, G., Lindenblatt, N., Giampietro, C., … Mazza, E. (2023). Multiscale mechanical analysis of the elastic modulus of skin. Acta Biomaterialia, 170, 155-168. https://doi.org/10.1016/j.actbio.2023.08.030
Unlocking the potential of CuAgZr metallic classes: a comprehensive exploration with combinatorial synthesis, high-throughput characterization, and machine learning
Wieczerzak, K., Groetsch, A., Pajor, K., Jain, M., Müller, A. M., Vockenhuber, C., … Michler, J. (2023). Unlocking the potential of CuAgZr metallic classes: a comprehensive exploration with combinatorial synthesis, high-throughput characterization, and machine learning. Advanced Science, 10(31), 2302997 (15 pp.). https://doi.org/10.1002/advs.202302997
Recent advances on <em>α</em>-diimine Ni and Pd complexes for catalyzed ethylene (co)polymerization: a comprehensive review
Wu, R., Klingler Wu, W., Stieglitz, L., Gaan, S., Rieger, B., & Heuberger, M. (2023). Recent advances on α-diimine Ni and Pd complexes for catalyzed ethylene (co)polymerization: a comprehensive review. Coordination Chemistry Reviews, 474, 214844 (32 pp.). https://doi.org/10.1016/j.ccr.2022.214844
Hybrid hierarchical nanolattices with porous platinum coating
Almog, E., Sharma, A., Qi, Y., Zimmerman, J., & Rabkin, E. (2022). Hybrid hierarchical nanolattices with porous platinum coating. Acta Materialia, 225, 117552 (10 pp.). https://doi.org/10.1016/j.actamat.2021.117552
Inverse finite element approach to identify the post-necking hardening behavior of polyamide 12 under uniaxial tension
Amstutz, C., Weisse, B., Haeberlin, A., Burger, J., & Zurbuchen, A. (2022). Inverse finite element approach to identify the post-necking hardening behavior of polyamide 12 under uniaxial tension. Polymers, 14(17), 3476 (15 pp.). https://doi.org/10.3390/polym14173476
Investigations on the characterization of various adhesive joints by means of nanoindentation and computer tomography
Bernaczyk, A., Wagenführ, A., Zboray, R., Flisch, A., Lüthi, T., Vetter, B., … Niemz, P. (2022). Investigations on the characterization of various adhesive joints by means of nanoindentation and computer tomography. Materials, 15(23), 8604 (15 pp.). https://doi.org/10.3390/ma15238604
Height-to-diameter ratio and porosity strongly influence bulk compressive mechanical properties of 3D-printed polymer scaffolds
Contreras Raggio, J. I., Toro Arancibia, C., Millán, C., Ploeg, H. L., Aiyangar, A., & Vivanco, J. F. (2022). Height-to-diameter ratio and porosity strongly influence bulk compressive mechanical properties of 3D-printed polymer scaffolds. Polymers, 14(22), 5017 (15 pp.). https://doi.org/10.3390/polym14225017
Silicon nitride as a biomedical material: an overview
Du, X., Lee, S. S., Blugan, G., & Ferguson, S. J. (2022). Silicon nitride as a biomedical material: an overview. International Journal of Molecular Sciences, 23(12), 6551 (32 pp.). https://doi.org/10.3390/ijms23126551
Multiple assembly strategies for silica aerogel-fiber combinations - a review
Mazrouei-Sebdani, Z., Naeimirad, M., Peterek, S., Begum, H., Galmarini, S., Pursche, F., … Malfait, W. J. (2022). Multiple assembly strategies for silica aerogel-fiber combinations - a review. Materials and Design, 223, 111228 (32 pp.). https://doi.org/10.1016/j.matdes.2022.111228
Mechanical properties of atomic-layer-deposited Al<sub>2</sub>O<sub>3</sub>/Y<sub>2</sub>O<sub>3 </sub>nanolaminate films on aluminum toward protective coatings
Niemelä, J. P., Putz, B., Mata-Osoro, G., Guerra-Nuñez, C., Widmer, R. N., Rohbeck, N., … Utke, I. (2022). Mechanical properties of atomic-layer-deposited Al2O3/Y2O3 nanolaminate films on aluminum toward protective coatings. ACS Applied Nano Materials, 5(5), 6285-6296. https://doi.org/10.1021/acsanm.2c00378
 

Pages