Active Filters

  • (-) Keywords = micromechanics
  • (-) Journal ≠ Materialia
Search Results 1 - 20 of 38
Select Page
Interfacial fracture behavior and adhesive strength in tensile and shear loading of SiC-PyC-SiC composites by micro-scale specimens
Ast, J., Tian, C., Herre, P., Rohbeck, N., Casari, D., Michler, J., … Schwiedrzik, J. J. (2023). Interfacial fracture behavior and adhesive strength in tensile and shear loading of SiC-PyC-SiC composites by micro-scale specimens. Acta Materialia, 259, 119273 (12 pp.). https://doi.org/10.1016/j.actamat.2023.119273
Microscale 3D printing and tuning of cellulose nanocrystals reinforced polymer nanocomposites
Groetsch, A., Stelzl, S., Nagel, Y., Kochetkova, T., Scherrer, N. C., Ovsianikov, A., … Schwiedrzik, J. (2023). Microscale 3D printing and tuning of cellulose nanocrystals reinforced polymer nanocomposites. Small, 19(3), 2202470 (12 pp.). https://doi.org/10.1002/smll.202202470
Effects of aging on rheological, chemical, and micromechanical properties of waterborne epoxy resin modified bitumen emulsion
Li, R., Leng, Z., Li, G., Yang, B., & Lu, G. (2023). Effects of aging on rheological, chemical, and micromechanical properties of waterborne epoxy resin modified bitumen emulsion. International Journal of Pavement Engineering, 24(2), 2077943 (12 pp.). https://doi.org/10.1080/10298436.2022.2077943
The effect of orientation on the deformation behavior of Cr<sub>2</sub>AlC
Pürstl, J. T., Edwards, T. E. J., León-Cázares, F. D., Thompson, R. P., della Ventura, N. M., Jones, N. G., & Clegg, W. J. (2023). The effect of orientation on the deformation behavior of Cr2AlC. Acta Materialia, 257, 119136 (10 pp.). https://doi.org/10.1016/j.actamat.2023.119136
Abnormal grain growth in ultrafine grained Ni under high-cycle loading
Barrios, A., Zhang, Y., Maeder, X., Castelluccio, G., Pierron, O., & Zhu, T. (2022). Abnormal grain growth in ultrafine grained Ni under high-cycle loading. Scripta Materialia, 209, 114372 (6 pp.). https://doi.org/10.1016/j.scriptamat.2021.114372
On the thinnest Al<sub>2</sub>O<sub>3</sub> interlayers in Al‐based nanolaminates to enhance strength, and the role of constraint
Edwards, T. E. J., Xie, T., della Ventura, N. M., Casari, D., Guerra, C., Huszár, E., … Michler, J. (2022). On the thinnest Al2O3 interlayers in Al‐based nanolaminates to enhance strength, and the role of constraint. Acta Materialia, 240, 118345 (15 pp.). https://doi.org/10.1016/j.actamat.2022.118345
Micropillar compression of single crystal tungsten carbide, part 1: temperature and orientation dependence of deformation behaviour
Jones, H., Tong, V., Ramachandramoorthy, R., Mingard, K., Michler, J., & Gee, M. (2022). Micropillar compression of single crystal tungsten carbide, part 1: temperature and orientation dependence of deformation behaviour. International Journal of Refractory Metals and Hard Materials, 102, 105729 (12 pp.). https://doi.org/10.1016/j.ijrmhm.2021.105729
Anomalous high strain rate compressive behavior of additively manufactured copper micropillars
Ramachandramoorthy, R., Kalácska, S., Poras, G., Schwiedrzik, J., Edwards, T. E. J., Maeder, X., … Michler, J. (2022). Anomalous high strain rate compressive behavior of additively manufactured copper micropillars. Applied Materials Today, 27, 101415 (11 pp.). https://doi.org/10.1016/j.apmt.2022.101415
Dynamic cryo-mechanical properties of additively manufactured nanocrystalline nickel 3D microarchitectures
Schwiedrzik, J., Ramachandramoorthy, R., Edwards, T. E. J., Schürch, P., Casari, D., Duarte, M. J., … Michler, J. (2022). Dynamic cryo-mechanical properties of additively manufactured nanocrystalline nickel 3D microarchitectures. Materials and Design, 220, 110836 (14 pp.). https://doi.org/10.1016/j.matdes.2022.110836
Smooth or not: robust fused silica micro-components by femtosecond-laser-assisted etching
Widmer, R. N., Bischof, D., Jurczyk, J., Michler, M., Schwiedrzik, J., & Michler, J. (2021). Smooth or not: robust fused silica micro-components by femtosecond-laser-assisted etching. Materials and Design, 204, 109670 (9 pp.). https://doi.org/10.1016/j.matdes.2021.109670
Revealing nanoscale deformation mechanisms caused by shear-based material removal on individual grains of a Ni-based superalloy
Xu, D., Edwards, T. E. J., Liao, Z., Maeder, X., Ramachandramoorthy, R., Jain, M., … Axinte, D. (2021). Revealing nanoscale deformation mechanisms caused by shear-based material removal on individual grains of a Ni-based superalloy. Acta Materialia, 212, 116929 (15 pp.). https://doi.org/10.1016/j.actamat.2021.116929
Novel micro-scale specimens for mode-dependent fracture testing of brittle materials: a case study on GaAs single crystals
Ast, J., Schwiedrzik, J. J., Rohbeck, N., Maeder, X., & Michler, J. (2020). Novel micro-scale specimens for mode-dependent fracture testing of brittle materials: a case study on GaAs single crystals. Materials and Design, 193, 108765 (11 pp.). https://doi.org/10.1016/j.matdes.2020.108765
Relating fracture toughness to micro-pillar compression response for a laser powder bed additive manufactured bulk metallic glass
Best, J. P., Ast, J., Li, B., Stolpe, M., Busch, R., Yang, F., … Kruzic, J. J. (2020). Relating fracture toughness to micro-pillar compression response for a laser powder bed additive manufactured bulk metallic glass. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 770, 138535 (8 pp.). https://doi.org/10.1016/j.msea.2019.138535
A new viscoelastic micromechanical model for bitumen-filler mastic
Fadil, H., Jelagin, D., & Partl, M. N. (2020). A new viscoelastic micromechanical model for bitumen-filler mastic. Construction and Building Materials, 253, 119062 (13 pp.). https://doi.org/10.1016/j.conbuildmat.2020.119062
3D HR-EBSD characterization of the plastic zone around crack tips in tungsten single crystals at the micron scale
Kalácska, S., Ast, J., Ispánovity, P. D., Michler, J., & Maeder, X. (2020). 3D HR-EBSD characterization of the plastic zone around crack tips in tungsten single crystals at the micron scale. Acta Materialia, 200, 211-222. https://doi.org/10.1016/j.actamat.2020.09.009
Investigation of geometrically necessary dislocation structures in compressed Cu micropillars by 3-dimensional HR-EBSD
Kalácska, S., Dankházi, Z., Zilahi, G., Maeder, X., Michler, J., Ispánovity, P. D., & Groma, I. (2020). Investigation of geometrically necessary dislocation structures in compressed Cu micropillars by 3-dimensional HR-EBSD. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 770, 138499 (10 pp.). https://doi.org/10.1016/j.msea.2019.138499
Effect of high strain rates and temperature on the micromechanical properties of 3D-printed polymer structures made by two-photon lithography
Rohbeck, N., Ramachandramoorthy, R., Casari, D., Schürch, P., Edwards, T. E. J., Schilinsky, L., … Michler, J. (2020). Effect of high strain rates and temperature on the micromechanical properties of 3D-printed polymer structures made by two-photon lithography. Materials and Design, 195, 108977 (9 pp.). https://doi.org/10.1016/j.matdes.2020.108977
Slip bands in lamellar TiAl during high cycle fatigue microcompression by correlative total strain mapping, diffraction orientation mapping and transmission electron imaging
Edwards, T. E. J., Di Gioacchino, F., Goodfellow, A. J., & Clegg, W. J. (2019). Slip bands in lamellar TiAl during high cycle fatigue microcompression by correlative total strain mapping, diffraction orientation mapping and transmission electron imaging. International Journal of Fatigue, 124, 520-527. https://doi.org/10.1016/j.ijfatigue.2019.03.016
The role of β-titanium ligaments in the deformation of dual phase titanium alloys
Jun, T. S., Maeder, X., Bhowmik, A., Guillonneau, G., Michler, J., Giuliani, F., & Britton, T. B. (2019). The role of β-titanium ligaments in the deformation of dual phase titanium alloys. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 746, 394-405. https://doi.org/10.1016/j.msea.2019.01.032
Dynamic plasticity and failure of microscale glass: rate-dependent ductile–brittle–ductile transition
Ramachandramoorthy, R., Schwiedrzik, J., Petho, L., Guerra-Nuñez, C., Frey, D., Breguet, J. M., & Michler, J. (2019). Dynamic plasticity and failure of microscale glass: rate-dependent ductile–brittle–ductile transition. Nano Letters, 19(4), 2350-2359. https://doi.org/10.1021/acs.nanolett.8b05024