Active Filters

  • (-) Keywords = morphology
Search Results 1 - 20 of 27
Select Page
Thermal stability of thin Au films deposited on salt whiskers
Almog, E., Derkach, V., Sharma, A., Novick-Cohen, A., Greer, J. R., & Rabkin, E. (2021). Thermal stability of thin Au films deposited on salt whiskers. Acta Materialia, 205, 116537 (11 pp.). https://doi.org/10.1016/j.actamat.2020.116537
Micromechanical surface investigation of bio-modified RAP binder
Cavalli, M. C., & Poulikakos, L. D. (2020). Micromechanical surface investigation of bio-modified RAP binder. In M. Pasetto, M. N. Partl, & G. Tebaldi (Eds.), Lecture notes in civil engineering: Vol. 48. Proceedings of the 5th international symposium on asphalt pavements & environment (APE) (pp. 14-22). https://doi.org/10.1007/978-3-030-29779-4_2
Exciton dynamics and effects of structural order in morphology-controlled J-aggregate assemblies
Anantharaman, S. B., Stöferle, T., Nüesch, F. A., Mahrt, R. F., & Heier, J. (2019). Exciton dynamics and effects of structural order in morphology-controlled J-aggregate assemblies. Advanced Functional Materials, 1806997 (8 pp.). https://doi.org/10.1002/adfm.201806997
Measuring particle size distribution of nanoparticle enabled medicinal products, the joint view of EUNCL and NCI-NCL. A step by step approach combining orthogonal measurements with increasing complexity
Caputo, F., Clogston, J., Calzolai, L., Rösslein, M., & Prina-Mello, A. (2019). Measuring particle size distribution of nanoparticle enabled medicinal products, the joint view of EUNCL and NCI-NCL. A step by step approach combining orthogonal measurements with increasing complexity. Journal of Controlled Release, 299, 31-43. https://doi.org/10.1016/j.jconrel.2019.02.030
Sn-decorated Cu for selective electrochemical CO<sub>2</sub> to CO conversion: precision architecture beyond composition design
Ju, W., Zeng, J., Bejtka, K., Ma, H., Rentsch, D., Castellino, M., … Battaglia, C. (2019). Sn-decorated Cu for selective electrochemical CO2 to CO conversion: precision architecture beyond composition design. ACS Applied Energy Materials, 2(1), 867-872. https://doi.org/10.1021/acsaem.8b01944
Study of the morphology of organic ferroelectric diodes with combined scanning force and scanning transmission X-ray microscopy
Bernard, L., Khikhlovskyi, V., van Breemen, A., Michels, J. J., Janssen, R., Kemerink, M., … Pilet, N. (2018). Study of the morphology of organic ferroelectric diodes with combined scanning force and scanning transmission X-ray microscopy. Organic Electronics, 53, 242-248. https://doi.org/10.1016/j.orgel.2017.11.012
Increasing photovoltaic performance of an organic cationic chromophore by anion exchange
Gesevičius, D., Neels, A., Jenatsch, S., Hack, E., Viani, L., Athanasopoulos, S., … Heier, J. (2018). Increasing photovoltaic performance of an organic cationic chromophore by anion exchange. Advanced Science, 5(2), 1700496 (9 pp.). https://doi.org/10.1002/advs.201700496
Morphology and crystallization of biobased polyamide 56 blended with polyethylene terephthalate
Yan, Y., Gooneie, A., Ye, H., Deng, L., Qiu, Z., Reifler, F. A., & Hufenus, R. (2018). Morphology and crystallization of biobased polyamide 56 blended with polyethylene terephthalate. Macromolecular Materials and Engineering, 303(9), 1800214 (10 pp.). https://doi.org/10.1002/mame.201800214
Melt-spun liquid core fibers: physical and morphological characteristics
Naeimirad, M., Zadhoush, A., Abrishamkar, A., Pishevar, A., & Leal, A. A. (2016). Melt-spun liquid core fibers: physical and morphological characteristics. Iranian Polymer Journal, 25(5), 397-403. https://doi.org/10.1007/s13726-016-0431-y
The capacitance and charge of agglomerated nanoparticles during sintering
Cao, L. N. Y., Wang, J., Fissan, H., Pratsinis, S. E., Eggersdorfer, M. L., & Pui, D. Y. H. (2015). The capacitance and charge of agglomerated nanoparticles during sintering. Journal of Aerosol Science, 83, 1-11. https://doi.org/10.1016/j.jaerosci.2015.01.002
Fine and ultrafine particles in the vicinity of industrial activities: a review
Riffault, V., Arndt, J., Marris, H., Mbengue, S., Setyan, A., Alleman, L. Y., … Wenger, J. (2015). Fine and ultrafine particles in the vicinity of industrial activities: a review. Critical Reviews in Environmental Science and Technology, 45(21), 2305-2356. https://doi.org/10.1080/10643389.2015.1025636
Composition and morphology of C-A-S-H in blended pastes
Rossen, J., Lothenbach, B., & Scrivener, K. (2015). Composition and morphology of C-A-S-H in blended pastes (p. (9 pp.). Presented at the 14th international congress on the chemistry of cement (ICCC 2015). .
Toward ultraflat surface morphologies during focused electron beam induced nanosynthesis: disruption origins and compensation
Winkler, R., Szkudlarek, A., Fowlkes, J. D., Rack, P. D., Utke, I., & Plank, H. (2015). Toward ultraflat surface morphologies during focused electron beam induced nanosynthesis: disruption origins and compensation. ACS Applied Materials and Interfaces, 7(5), 3289-3297. https://doi.org/10.1021/am508052k
Liquid ammonia treatment of (cationic) nanofibrillated cellulose/vermiculite composites
Ho, T. T. T., Zimmermann, T., Caseri, W. R., & Smith, P. (2013). Liquid ammonia treatment of (cationic) nanofibrillated cellulose/vermiculite composites. Journal of Polymer Science. Part B: Polymer Physics, 51(8), 638-648. https://doi.org/10.1002/polb.23241
Effects of particle size and morphology on filtration of airborne nanoparticles
Wang, J. (2013). Effects of particle size and morphology on filtration of airborne nanoparticles. KONA Powder and Particle Journal, 30, 256-266. https://doi.org/10.14356/kona.2013024
The cutaneous lesions of dioxin exposure: lessons from the poisoning of Victor Yushchenko
Saurat, J. H., Kaya, G., Saxer-Sekulic, N., Pardo, B., Becker, M., Fontao, L., … Sorg, O. (2012). The cutaneous lesions of dioxin exposure: lessons from the poisoning of Victor Yushchenko. Toxicological Sciences, 125(1), 310-317. https://doi.org/10.1093/toxsci/kfr223
Diamond wire wafering: wafer morphology in comparison to slurry sawn wafers
Bidiville, A., Heiber, J., Wasmer, K., Habegger, S., & Assi, F. (2010). Diamond wire wafering: wafer morphology in comparison to slurry sawn wafers (pp. 1673-1676). Presented at the 25th European Photovoltaic Solar Energy Conference and Exhibition (25th EU PVSEC); 5th World Conference on Photovoltaic Energy Conversion (WCPEC-5). https://doi.org/10.4229/25thEUPVSEC2010-2CV.1.78
Reinforcing effect of carboxymethylated nanofibrillated cellulose powder on hydroxypropyl cellulose
Eyholzer, C., Lopez-Suevos, F., Tingaut, P., Zimmermann, T., & Oksman, K. (2010). Reinforcing effect of carboxymethylated nanofibrillated cellulose powder on hydroxypropyl cellulose. Cellulose, 17(4), 793-802. https://doi.org/10.1007/s10570-010-9423-9
Influence of bias voltage on the microstructure and physical properties of magnetron sputtered Zr-Si-N nanocomposite thin films
Sandu, C. S., Cusnir, N., Oezer, D., Sanjinés, R., & Patscheider, J. (2009). Influence of bias voltage on the microstructure and physical properties of magnetron sputtered Zr-Si-N nanocomposite thin films. Surface and Coatings Technology, 204(6-7), 969-972. https://doi.org/10.1016/j.surfcoat.2009.06.042
<I>Chimie douce</I> synthesis and thermochemical characterization of mesoporous perovskite-type titanate phases
Bocher, L., Aguirre, M. H., Robert, R., Trottmann, M., Logvinovich, D., Hug, P., & Weidenkaff, A. (2007). Chimie douce synthesis and thermochemical characterization of mesoporous perovskite-type titanate phases. Thermochimica Acta, 457(1-2), 11-19. https://doi.org/10.1016/j.tca.2007.02.013