Active Filters

  • (-) Keywords = plasticity
  • (-) Keywords ≠ activation parameters
Search Results 1 - 20 of 21
Select Page
Inverse finite element approach to identify the post-necking hardening behavior of polyamide 12 under uniaxial tension
Amstutz, C., Weisse, B., Haeberlin, A., Burger, J., & Zurbuchen, A. (2022). Inverse finite element approach to identify the post-necking hardening behavior of polyamide 12 under uniaxial tension. Polymers, 14(17), 3476 (15 pp.). https://doi.org/10.3390/polym14173476
Temperature-dependent dynamic plasticity of micro-scale fused silica
Widmer, R. N., Groetsch, A., Kermouche, G., Diaz, A., Pillonel, G., Jain, M., … Michler, J. (2022). Temperature-dependent dynamic plasticity of micro-scale fused silica. Materials and Design, 215, 110503 (11 pp.). https://doi.org/10.1016/j.matdes.2022.110503
On the extraction of yield stresses from micro-compression experiments
Pürstl, J. T., Jones, H. O., Edwards, T. E. J., Thompson, R. P., Di Gioacchino, F., Jones, N. G., & Clegg, W. J. (2021). On the extraction of yield stresses from micro-compression experiments. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 800, 140323 (8 pp.). https://doi.org/10.1016/j.msea.2020.140323
Investigation of geometrically necessary dislocation structures in compressed Cu micropillars by 3-dimensional HR-EBSD
Kalácska, S., Dankházi, Z., Zilahi, G., Maeder, X., Michler, J., Ispánovity, P. D., & Groma, I. (2020). Investigation of geometrically necessary dislocation structures in compressed Cu micropillars by 3-dimensional HR-EBSD. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 770, 138499 (10 pp.). https://doi.org/10.1016/j.msea.2019.138499
Variation of relief topography and hardness of surface layers of materials due to impact-oscillatory loading
Chausov, M., Maruschak, P., Pylypenko, A., Brezinová, J., Bishchak, R., & Burda, I. (2019). Variation of relief topography and hardness of surface layers of materials due to impact-oscillatory loading. Materials, 12(17), 2720 (16 pp.). https://doi.org/10.3390/ma12172720
An experimental study of the polycrystalline plasticity of lamellar titanium aluminide
Edwards, T. E. J., Di Gioacchino, F., & Clegg, W. J. (2019). An experimental study of the polycrystalline plasticity of lamellar titanium aluminide. International Journal of Plasticity, 118, 291-319. https://doi.org/10.1016/j.ijplas.2019.02.013
Dynamic plasticity and failure of microscale glass: rate-dependent ductile–brittle–ductile transition
Ramachandramoorthy, R., Schwiedrzik, J., Petho, L., Guerra-Nuñez, C., Frey, D., Breguet, J. M., & Michler, J. (2019). Dynamic plasticity and failure of microscale glass: rate-dependent ductile–brittle–ductile transition. Nano Letters, 19(4), 2350-2359. https://doi.org/10.1021/acs.nanolett.8b05024
Nanoindentation deformation and cracking in sapphire
Trabadelo, V., Pathak, S., Saeidi, F., Parlinska-Wojtan, M., & Wasmer, K. (2019). Nanoindentation deformation and cracking in sapphire. Ceramics International, 45(8), 9835-9845. https://doi.org/10.1016/j.ceramint.2019.02.022
Bending tests on timber-concrete composite members made of beech laminated veneer lumber with notched connection
Boccadoro, L., Zweidler, S., Steiger, R., & Frangi, A. (2017). Bending tests on timber-concrete composite members made of beech laminated veneer lumber with notched connection. Engineering Structures, 132, 14-28. https://doi.org/10.1016/j.engstruct.2016.11.029
Calculation model to assess the structural behavior of LVL-concrete composite members with ductile notched connection
Boccadoro, L., Zweidler, S., Steiger, R., & Frangi, A. (2017). Calculation model to assess the structural behavior of LVL-concrete composite members with ductile notched connection. Engineering Structures, 153, 106-117. https://doi.org/10.1016/j.engstruct.2017.10.024
Erosion mechanisms during abrasive waterjet machining: model microstructures and single particle experiments
Mieszala, M., Torrubia, P. L., Axinte, D. A., Schwiedrzik, J. J., Guo, Y., Mischler, S., … Philippe, L. (2017). Erosion mechanisms during abrasive waterjet machining: model microstructures and single particle experiments. Journal of Materials Processing Technology, 247, 92-102. https://doi.org/10.1016/j.jmatprotec.2017.04.003
Bridging room-temperature and high-temperature plasticity in decagonal Al–Ni–Co quasicrystals by micro-thermomechanical testing
Zou, Y., Wheeler, J. M., Sologubenko, A. S., Michler, J., Steurer, W., & Spolenak, R. (2016). Bridging room-temperature and high-temperature plasticity in decagonal Al–Ni–Co quasicrystals by micro-thermomechanical testing. Philosophical Magazine, 96(32-34), 3356-3378. https://doi.org/10.1080/14786435.2016.1234722
Effect of boundary conditions on plasticity and creep behavior analysis of particle reinforced composites by representative volume element approach
Cho, Y. J., Lee, W. J., & Park, Y. H. (2015). Effect of boundary conditions on plasticity and creep behavior analysis of particle reinforced composites by representative volume element approach. Computational Materials Science, 100, 67-75. https://doi.org/10.1016/j.commatsci.2014.11.036
Mechanical behavior of Cu/TiN multilayers at ambient and elevated temperatures: stress-assisted diffusion of Cu
Raghavan, R., Wheeler, J. M., Esqué-de los Ojos, D., Thomas, K., Almandoz, E., Fuentes, G. G., & Michler, J. (2015). Mechanical behavior of Cu/TiN multilayers at ambient and elevated temperatures: stress-assisted diffusion of Cu. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 620, 375-382. https://doi.org/10.1016/j.msea.2014.10.023
A continuous Masing approach for a physically motivated formulation of temperature and strain-rate dependent plasticity
Mayer, T., Mazza, E., & Holdsworth, S. R. (2013). A continuous Masing approach for a physically motivated formulation of temperature and strain-rate dependent plasticity. International Journal of Pressure Vessels and Piping, 102-103, 1-12. https://doi.org/10.1016/j.ijpvp.2012.11.001
Silicon micropillars: high stress plasticity
Rabier, J., Montagne, A., Wheeler, J. M., Demenet, J. L., Michler, J., & Ghisleni, R. (2013). Silicon micropillars: high stress plasticity. Physica Status Solidi C: Current Topics in Solid State Physics, 10(1), 11-15. https://doi.org/10.1002/pssc.201200546
Thermomechanical analysis of residual stresses in brazed diamond metal joints using Raman spectroscopy and finite element simulation
Akbari, M., Buhl, S., Leinenbach, C., Spolenak, R., & Wegener, K. (2012). Thermomechanical analysis of residual stresses in brazed diamond metal joints using Raman spectroscopy and finite element simulation. Mechanics of Materials, 52, 69-77. https://doi.org/10.1016/j.mechmat.2012.04.010
<I>In situ</I> deformation of micro-objects as a tool to uncover the micro-mechanisms of the brittle-to-ductile transition in semiconductors: the case of indium antimonide
Thilly, L., Ghisleni, R., Swistak, C., & Michler, J. (2012). In situ deformation of micro-objects as a tool to uncover the micro-mechanisms of the brittle-to-ductile transition in semiconductors: the case of indium antimonide. Philosophical Magazine, 92(25-27), 3315-3325. https://doi.org/10.1080/14786435.2012.704422
<I>In situ</I> micro-Raman compression: characterization of plasticity and fracture in GaAs
Ghisleni, R., Liu, J., Raghavan, R., Brodard, P., Lugstein, A., Wasmer, K., & Michler, J. (2011). In situ micro-Raman compression: characterization of plasticity and fracture in GaAs. Philosophical Magazine, 91(7-9), 1286-1292. https://doi.org/10.1080/14786435.2010.495358
Nanomechanics of rhenium wires: elastic modulus, yield strength and strain hardening
Philippe, L., Wang, Z., Peyrot, I., Hassel, A. W., & Michler, J. (2009). Nanomechanics of rhenium wires: elastic modulus, yield strength and strain hardening. Acta Materialia, 57(14), 4032-4035. https://doi.org/10.1016/j.actamat.2009.04.047