Active Filters

  • (-) Keywords = tensile test
  • (-) Empa Laboratories ≠ 505 Materials for Renewable Energy
  • (-) Keywords ≠ EQE
Search Results 1 - 13 of 13
  • RSS Feed
Select Page
Electromechanical behavior of Al/Al<sub>2</sub>O<sub>3</sub> multilayers on flexible substrates: insights from in situ film stress and resistance measurements
Putz, B., Edwards, T. E. J., Huszar, E., Gruber, P. A., Gradwohl, K. P., Kreiml, P., … Michler, J. (2023). Electromechanical behavior of Al/Al2O3 multilayers on flexible substrates: insights from in situ film stress and resistance measurements. Advanced Engineering Materials, 25(2), 2200951 (15 pp.). https://doi.org/10.1002/adem.202200951
Practical considerations on the application of the recent SIA 2052 guidelines on testing of ultra-high-performance fiberreinforced concrete
Loser, R., Justs, J., & Lura, P. (2020). Practical considerations on the application of the recent SIA 2052 guidelines on testing of ultra-high-performance fiberreinforced concrete. In B. Massicotte, B. Mobasher, F. Minelli, & G. Plizzari (Eds.), Fib Bulletin: Vol. 95. Proceedings of the ACI-fib-RILEM international workshop - FRC 2018 (pp. 504-513). https://doi.org/10.35789/fib.BULL.0095.Ch51
Damage evolution in wood: synchrotron radiation micro-computed tomography (SRμCT) as a complementary tool for interpreting acoustic emission (AE) behavior
Baensch, F., Zauner, M., Sanabria, S. J., Sause, M. G. R., Pinzer, B. R., Brunner, A. J., … Niemz, P. (2015). Damage evolution in wood: synchrotron radiation micro-computed tomography (SRμCT) as a complementary tool for interpreting acoustic emission (AE) behavior. Holzforschung, 69(8), 1015-1025. https://doi.org/10.1515/hf-2014-0152
Finite element modelling used to support wood failure identification based on acoustic emission signals
Vergeynst, L. L., Sause, M. G. R., Ritschel, F., Brunner, A. J., Niemz, P., & Steppe, K. (2014). Finite element modelling used to support wood failure identification based on acoustic emission signals. In S. Franke, B. Franke, & R. Widmann (Eds.), COST timber bridge conference (pp. 141-146). Bern University of Applied Sciences.
Combining image correlation from optical methods and acoustic analysis for investigating damage evolution in Plywood
Ritschel, F., Niemz, P., & Brunner, A. J. (2011). Combining image correlation from optical methods and acoustic analysis for investigating damage evolution in Plywood. In F. Divos (Ed.), 17th international nondestructive testing and evaluation of wood symposium (pp. 343-350). University of West Hungary.
Acoustic emission monitoring of tensile tests on welded wood-joints
Brunner, A. J., Tannert, T., & Vallée, T. (2010). Acoustic emission monitoring of tensile tests on welded wood-joints (p. (7 pp.). Presented at the 29th European Conference on Acoustic Emission Testing (EWGAE 2010). .
Waveform analysis of acoustic emission monitoring of tensile tests on welded wood-joints
Brunner, A. J., Tannert, T., & Vallée, T. (2010). Waveform analysis of acoustic emission monitoring of tensile tests on welded wood-joints. Journal of Acoustic Emission, 28, 59-67.
<I>In situ</I> electron microscopy mechanical testing of silicon nanowires using electrostatically actuated tensile stages
Zhang, D., Breguet, J. M., Clavel, R., Sivakov, V., Christiansen, S., & Michler, J. (2010). In situ electron microscopy mechanical testing of silicon nanowires using electrostatically actuated tensile stages. Journal of Microelectromechanical Systems, 19(3), 663-674. https://doi.org/10.1109/JMEMS.2010.2044746
A nano-tensile testing system for studying nanostructures inside an electron microscope: design, characterization and application
Zhang, D. (2010). A nano-tensile testing system for studying nanostructures inside an electron microscope: design, characterization and application [Doctoral dissertation, EPF Lausanne]. https://doi.org/10.5075/epfl-thesis-4605
Development and characterisation of functionalised e-spun bio-fibres for tissue engineering
Liu, X. (2009). Development and characterisation of functionalised e-spun bio-fibres for tissue engineering [Master thesis].
Acoustic emission rate behavior of laminated wood specimens under tensile loading
Brunner, A. J., Howald, M. T., & Niemz, P. (2006). Acoustic emission rate behavior of laminated wood specimens under tensile loading. Journal of Acoustic Emission, 24, 104-110.
Shearography for determination of 2D strain distributions
Kästle, R., Hack, E., & Sennhauser, U. (1999). Shearography for determination of 2D strain distributions. In M. Kujawinska & W. Osten (Eds.), Proceedings of SPIE: Vol. 3824. Europto. Optical measurement systems for industrial inspection (pp. 38-44). https://doi.org/10.1117/12.364286
Multi-wavelength shearography for evaluation of in-plane strain distributions
Kästle, R., Hack, E., & Sennhauser, U. (1998). Multi-wavelength shearography for evaluation of in-plane strain distributions. In K. G. Harding, D. J. Svetkoff, K. Creath, & J. S. Harris (Eds.), Proceedings of SPIE: Vol. 3520. Three-dimensional imaging, optical metrology, and inspection IV (pp. 248-253). https://doi.org/10.1117/12.334338