Search Results 1 - 20 of 17,599

Pages

  • RSS Feed
Select Page
Effect of different ions on dissolution rates of silica and feldspars at high pH
Bagheri, M., Lothenbach, B., Shakoorioskooie, M., & Scrivener, K. (2022). Effect of different ions on dissolution rates of silica and feldspars at high pH. Cement and Concrete Research, 152, 106644 (19 pp.). https://doi.org/10.1016/j.cemconres.2021.106644
Abnormal grain growth in ultrafine grained Ni under high-cycle loading
Barrios, A., Zhang, Y., Maeder, X., Castelluccio, G., Pierron, O., & Zhu, T. (2022). Abnormal grain growth in ultrafine grained Ni under high-cycle loading. Scripta Materialia, 209, 114372 (6 pp.). https://doi.org/10.1016/j.scriptamat.2021.114372
Stability of hydrotalcite (Mg-Al layered double hydroxide) in presence of different anions
Bernard, E., Zucha, W. J., Lothenbach, B., & Mäder, U. (2022). Stability of hydrotalcite (Mg-Al layered double hydroxide) in presence of different anions. Cement and Concrete Research, 152, 106674 (16 pp.). https://doi.org/10.1016/j.cemconres.2021.106674
Characterizing plastics from large household appliances: brominated flame retardants, other additives and density profiles
Bill, A., Haarman, A., Gasser, M., Böni, H., Rösslein, M., & Wäger, P. A. (2022). Characterizing plastics from large household appliances: brominated flame retardants, other additives and density profiles. Resources, Conservation and Recycling, 177, 105956 (10 pp.). https://doi.org/10.1016/j.resconrec.2021.105956
Interlaboratory test to characterize the cyclic behavior of bituminous interlayers: an overview of testing equipment and protocols
Canestrari, F., Attia, T., Di Benedetto, H., Graziani, A., Jaskula, P., Kim, Y. R., … Zofka, A. (2022). Interlaboratory test to characterize the cyclic behavior of bituminous interlayers: an overview of testing equipment and protocols. In H. Di Benedetto, H. Baaj, E. Chailleux, G. Tebaldi, C. Sauzéat, & S. Mangiafico (Eds.), RILEM Bookseries: Vol. 27. ISBM 2020: Proceedings of the RILEM International Symposium on Bituminous Materials (pp. 29-36). https://doi.org/10.1007/978-3-030-46455-4_4
Determination of chlorinated paraffins (CPs): analytical conundrums and the pressing need for reliable and relevant standards
Fernandes, A. R., Vetter, W., Dirks, C., van Mourik, L., Cariou, R., Sprengel, J., … Krätschmer, K. (2022). Determination of chlorinated paraffins (CPs): analytical conundrums and the pressing need for reliable and relevant standards. Chemosphere, 286(3), 131878 (12 pp.). https://doi.org/10.1016/j.chemosphere.2021.131878
Enhanced gas-liquid absorption through natural convection studied by neutron imaging
Fumey, B., Borgschulte, A., Stoller, S., Fricker, R., Knechtle, R., Kaestner, A., … Baldini, L. (2022). Enhanced gas-liquid absorption through natural convection studied by neutron imaging. International Journal of Heat and Mass Transfer, 182, 121967 (11 pp.). https://doi.org/10.1016/j.ijheatmasstransfer.2021.121967
Solubility and speciation of iron in cementitious systems
Furcas, F. E., Lothenbach, B., Isgor, O. B., Mundra, S., Zhang, Z., & Angst, U. M. (2022). Solubility and speciation of iron in cementitious systems. Cement and Concrete Research, 151, 106620 (13 pp.). https://doi.org/10.1016/j.cemconres.2021.106620
Performance and dynamics of active greywater heat recovery in buildings
Hadengue, B., Morgenroth, E., Larsen, T. A., & Baldini, L. (2022). Performance and dynamics of active greywater heat recovery in buildings. Applied Energy, 305, 117677 (13 pp.). https://doi.org/10.1016/j.apenergy.2021.117677
Hydration of blended cement with high volume iron-rich slag from non-ferrous metallurgy
Hallet, V., Pedersen, M. T., Lothenbach, B., Winnefeld, F., De Belie, N., & Pontikes, Y. (2022). Hydration of blended cement with high volume iron-rich slag from non-ferrous metallurgy. Cement and Concrete Research, 151, 106624 (13 pp.). https://doi.org/10.1016/j.cemconres.2021.106624
Micropillar compression of single crystal tungsten carbide, part 1: temperature and orientation dependence of deformation behaviour
Jones, H., Tong, V., Ramachandramoorthy, R., Mingard, K., Michler, J., & Gee, M. (2022). Micropillar compression of single crystal tungsten carbide, part 1: temperature and orientation dependence of deformation behaviour. International Journal of Refractory Metals and Hard Materials, 102, 105729 (12 pp.). https://doi.org/10.1016/j.ijrmhm.2021.105729
Single nanosized graphene/TiO<sub>x</sub> multi-shells on TiO<sub>2</sub> core via rapid-concomitant reaction pathway on metal oxide/polymer interface
Kato, K., Xin, Y., Vaucher, S., & Shirai, T. (2022). Single nanosized graphene/TiOx multi-shells on TiO2 core via rapid-concomitant reaction pathway on metal oxide/polymer interface. Scripta Materialia, 208, 114358 (6 pp.). https://doi.org/10.1016/j.scriptamat.2021.114358
A structurally-consistent CASH+ sublattice solid solution model for fully hydrated C-S-H phases: thermodynamic basis, methods, and Ca-Si-H<sub>2</sub>O core sub-model
Kulik, D. A., Miron, G. D., & Lothenbach, B. (2022). A structurally-consistent CASH+ sublattice solid solution model for fully hydrated C-S-H phases: thermodynamic basis, methods, and Ca-Si-H2O core sub-model. Cement and Concrete Research, 151, 106585 (21 pp.). https://doi.org/10.1016/j.cemconres.2021.106585
External surface cracked offshore pipes reinforced with composite repair system: a numerical analysis
Li, Z., Jiang, X., & Hopman, H. (2022). External surface cracked offshore pipes reinforced with composite repair system: a numerical analysis. Theoretical and Applied Fracture Mechanics, 117, 103191 (13 pp.). https://doi.org/10.1016/j.tafmec.2021.103191
Comparison of ignition and early flame propagation in methane/air mixtures using nanosecond repetitively pulsed discharge and inductive ignition in a pre-chamber setup under engine relevant conditions
Merotto, L., Balmelli, M., Vera-Tudela, W., & Soltic, P. (2022). Comparison of ignition and early flame propagation in methane/air mixtures using nanosecond repetitively pulsed discharge and inductive ignition in a pre-chamber setup under engine relevant conditions. Combustion and Flame, 237, 111851 (16 pp.). https://doi.org/10.1016/j.combustflame.2021.111851
Extensions of CASH+ thermodynamic solid solution model for the uptake of alkali metals and alkaline earth metals in C-S-H
Miron, G. D., Kulik, D. A., Yan, Y., Tits, J., & Lothenbach, B. (2022). Extensions of CASH+ thermodynamic solid solution model for the uptake of alkali metals and alkaline earth metals in C-S-H. Cement and Concrete Research, 152, 106667 (27 pp.). https://doi.org/10.1016/j.cemconres.2021.106667
Mechanisms and thermodynamic modelling of iodide sorption on AFm phases
Nedyalkova, L., Tits, J., Renaudin, G., Wieland, E., Mäder, U., & Lothenbach, B. (2022). Mechanisms and thermodynamic modelling of iodide sorption on AFm phases. Journal of Colloid and Interface Science, 608, 683-691. https://doi.org/10.1016/j.jcis.2021.09.104
Life cycle assessment of rubberized semi-dense asphalt pavements; a hybrid comparative approach
Piao, Z., Bueno, M., Poulikakos, L. D., & Hellweg, S. (2022). Life cycle assessment of rubberized semi-dense asphalt pavements; a hybrid comparative approach. Resources, Conservation and Recycling, 176, 105950 (10 pp.). https://doi.org/10.1016/j.resconrec.2021.105950
Analysis of low temperature cracking behavior at binder, mastic and asphalt concrete levels
Raab, C., Arraigada, M., & Ibrahimi, H. (2022). Analysis of low temperature cracking behavior at binder, mastic and asphalt concrete levels. In H. Di Benedetto, H. Baaj, E. Chailleux, G. Tebaldi, C. Sauzéat, & S. Mangiafico (Eds.), RILEM Bookseries: Vol. 27. ISBM 2020: Proceedings of the RILEM International Symposium on Bituminous Materials (pp. 255-261). https://doi.org/10.1007/978-3-030-46455-4_32
Prospective life-cycle assessment of greenhouse gas emissions of electricity-based mobility options
Rüdisüli, M., Bach, C., Bauer, C., Beloin-Saint-Pierre, D., Elber, U., Georges, G., … Teske, S. L. (2022). Prospective life-cycle assessment of greenhouse gas emissions of electricity-based mobility options. Applied Energy, 306, 118065 (20 pp.). https://doi.org/10.1016/j.apenergy.2021.118065
 

Pages