Active Filters

  • (-) Publication Type = Proceedings Paper
Search Results 1 - 20 of 4,395

Pages

  • RSS Feed
Select Page
Soft magnetoactive morphing structures with self-sensing properties, using multi-material extrusion additive manufacturing
Mondal, S., Kwaśniowski, M., Georgopoulou, A., Sapiński, B., Graule, T., & Clemens, F. (2024). Soft magnetoactive morphing structures with self-sensing properties, using multi-material extrusion additive manufacturing. In C. Klahn, M. Meboldt, & J. Ferchow (Eds.), Springer tracts in additive manufacturing. Industrializing additive manufacturing. Proceedings of AMPA2023 (pp. 365-386). https://doi.org/10.1007/978-3-031-42983-5_25
Extrusion based additive manufacturing of polymer derived ceramics
Clemens, F., Sarraf, F., & Eckey, L. (2024). Extrusion based additive manufacturing of polymer derived ceramics. In Eighteenth European inter-regional conference on ceramics "CIEC-18" (pp. 1-5).
Computationally efficient reinforcement learning: targeted exploration leveraging simple rules
Di Natale, L., Svetozarevic, B., Heer, P., & Jones, C. N. (2024). Computationally efficient reinforcement learning: targeted exploration leveraging simple rules. In Proceedings of the IEEE conference on decision and control (CDC) (pp. 2334-2339). https://doi.org/10.1109/CDC49753.2023.10384283
Exponential BGK integrator for multiscale flow simulation
Garmirian, F., Gorji, H., & Pfeiffer, M. (2024). Exponential BGK integrator for multiscale flow simulation. In R. S. Myong, K. Xu, & J. S. Wu (Eds.), AIP conference proceedings: Vol. 2996. International symposium on rarefied gas dynamics (p. 060005). https://doi.org/10.1063/5.0187429
Experimental study on steel girder strengthened with adhesively bonded iron-based shape memory alloy
Wang, S., Li, L., Su, Q., Jiang, X., & Ghafoori, E. (2024). Experimental study on steel girder strengthened with adhesively bonded iron-based shape memory alloy. In X. L. Gu, M. Motavalli, A. Ilki, & Q. Q. Yu (Eds.), Lecture notes in civil engineering: Vol. 259. International conference on smart monitoring, assessment and rehabilitation of civil structures (pp. 691-698). https://doi.org/10.1007/978-981-99-3362-4_56
Seismic retrofitting of bridge piers using pre-stressed Fe-SMA rebars
Raza, S., Julien, M., Shafei, B., Saiidi, M. S., Motavalli, M., & Shahverdi, M. (2024). Seismic retrofitting of bridge piers using pre-stressed Fe-SMA rebars. In X. L. Gu, M. Motavalli, A. Ilki, & Q. Q. Yu (Eds.), Lecture notes in civil engineering: Vol. 259. International conference on smart monitoring, assessment and rehabilitation of civil structures (pp. 539-550). https://doi.org/10.1007/978-981-99-3362-4_43
Fatigue strengthening of U-rib butt welds in orthotropic steel bridge decks using CFRP sheets
Lv, Z. L., Jiang, X., Qiang, X. H., Bai, J., & Ghafoori, E. (2024). Fatigue strengthening of U-rib butt welds in orthotropic steel bridge decks using CFRP sheets. In X. L. Gu, M. Motavalli, A. Ilki, & Q. Q. Yu (Eds.), Lecture notes in civil engineering: Vol. 259. International conference on smart monitoring, assessment and rehabilitation of civil structures (pp. 699-707). https://doi.org/10.1007/978-981-99-3362-4_57
Sol-gel chemistry approaches for the manufacturing of innovative functional composites for the aerospace sector
Bifulco, A., Imparato, C., Passaro, J., Malucelli, G., Gaan, S., & Aronne, A. (2024). Sol-gel chemistry approaches for the manufacturing of innovative functional composites for the aerospace sector. In Journal of physics: conference series: Vol. 2716. 13th EASN international conference on: innovation in aviation & space for opening new horizons (p. 012035 (8 pp.). https://doi.org/10.1088/1742-6596/2716/1/012035
Schubsteifigkeit und Schubfestigkeit von Eschen-Brettschichtholz
Palma, P., Steiger, R., Strahm, T., & Gehri, E. (2023). Schubsteifigkeit und Schubfestigkeit von Eschen-Brettschichtholz. In Tagungsband. Von der Forschung zur Praxis: Neue Erkenntnisse für die Bemessung im Holzbau. Erhaltung Schweizer Holzbaukultur (pp. 22-29). S-WIN.
Ergebnisse aus Versuchen an mit OSB/3 beplankten Holzrahmenbau-Wänden
Manser, N., Zoller, N., Kramer, L., Steiger, R., Geiser, M., & Frangi, A. (2023). Ergebnisse aus Versuchen an mit OSB/3 beplankten Holzrahmenbau-Wänden. In Tagungsband. Von der Forschung zur Praxis: Neue Erkenntnisse für die Bemessung im Holzbau. Erhaltung Schweizer Holzbaukultur (pp. 5-13). S-WIN.
Bestimmung des Norm-Trittschallpegels durch direkte Messung und mit Übertragungsfunktionen
Knuth, C., Schoenwald, S., Scheck, J., & Zeitler, B. (2023). Bestimmung des Norm-Trittschallpegels durch direkte Messung und mit Übertragungsfunktionen. In Fortschritte der Akustik - DAGA 2023. 49. Jahrestagung für Akustik (pp. 270-273). Deutsche Gesellschaft für Akustik e.V. (DEGA).
Thrust estimation for departing jet aircraft using position data based on a machine learning approach
Meister, J. (2023). Thrust estimation for departing jet aircraft using position data based on a machine learning approach. In Forum Acusticum 2023. Convention of the European Acoustics Association (p. (5 pp.). The European Acoustics Association (EAA).
Influence of acetate on the carbonation of brucite (Mg(OH)<sub>2</sub>)
Kamala Ilango, N., Nguyen, H., Winnefeld, F., & Kinnunen, P. (2023). Influence of acetate on the carbonation of brucite (Mg(OH)2). In Vol. 2. Further reduction of CO2-emission and circularity in the cement and concrete industry (pp. 241-244). ICCC Permanent Secretariat.
Synthesis of calcium sulfoaluminate-belite cement from lignite bottom ash using clinkerization and hydrothermal-calcination
Thala, M., Wattanachai, P., Wansom, S., Setthaya, N., Winnefeld, F., Chindaprasirt, P., & Pimraksa, K. (2023). Synthesis of calcium sulfoaluminate-belite cement from lignite bottom ash using clinkerization and hydrothermal-calcination. In Vol. 2. Further reduction of CO2-emission and circularity in the cement and concrete industry (pp. 246-249). ICCC Permanent Secretariat.
Formation and stability of magnesium silicate hydrate and hydromagnesite
Bernard, E., Lothenbach, B., Nguyen, H., Kuhn, R., & Winnefeld, F. (2023). Formation and stability of magnesium silicate hydrate and hydromagnesite. In Vol. 2. Further reduction of CO2-emission and circularity in the cement and concrete industry (pp. 39-42). ICCC Permanent Secretariat.
Upcycling of bio-waste ashes into additive for concrete
Wyrzykowski, M., Ghourchian, S., Toropovs, N., Sinthupinyo, S., Sisomphon, K., & Lura, P. (2023). Upcycling of bio-waste ashes into additive for concrete. In Vol. 3. Further reduction of CO2-emission and circularity in the cement and concrete industry (pp. 519-522). ICCC Permanent Secretariat.
Synthesis, characterization and solubility of sodium aluminosilicate hydrate (N-A-S-H) gel
Chen, Y., Miranda de Lima, L., Li, Z., Ma, B., Lothenbach, B., Ying, S., … Ye, G. (2023). Synthesis, characterization and solubility of sodium aluminosilicate hydrate (N-A-S-H) gel. In Vol. 2. Further reduction of CO2-emission and circularity in the cement and concrete industry (pp. 294-297). ICCC Permanent Secretariat.
Kinetics of iron (hydr)oxide precipitation in cementitious materials
Furcas, F. E., Mundra, S., Lothenbach, B., Isgor, O. B., & Angst, U. M. (2023). Kinetics of iron (hydr)oxide precipitation in cementitious materials. In Vol. 3. Further reduction of CO2-emission and circularity in the cement and concrete industry (pp. 287-290). ICCC Permanent Secretariat.
Push-out tests of wet-process adhesive-bonded beech timber-concrete and timber-polymer-concrete composite conections
Füchslin, M., Grönquist, P., Stucki, S., Mamie, T., Kelch, S., Burgert, I., & Frangi, A. (2023). Push-out tests of wet-process adhesive-bonded beech timber-concrete and timber-polymer-concrete composite conections. In A. Q. Nyrud, K. A. Malo, K. Nore, K. W. L. Alsen, S. Tulebekova, E. R. Staehr, … W. Wuyts (Eds.), Vol. 5. World conference on timber engineering (WCTE 2023) (pp. 3241-3247). https://doi.org/10.52202/069179-0422
Ultrafast control of exciton dynamics by optically-induced thermionic carrier injection in a metal-semiconductor heterojunction
Keller, K. R., Rojas-Aedo, R., Zhang, H., Schweizer, P., Allerbeck, J., Brida, D., … Maccaferri, N. (2023). Ultrafast control of exciton dynamics by optically-induced thermionic carrier injection in a metal-semiconductor heterojunction. In I. Rendina, L. Petti, D. Sagnelli, & G. Nenna (Eds.), Proceedings of SPIE: Vol. 12584. High-power, high-energy lasers and ultrafast optical technologies (p. 125840 (10 pp.). https://doi.org/10.1117/12.2665677
 

Pages