In short wavelength FEL designs, bunch compression is obtained by making the beam passing through a magnetic chicane with an energy chirp typically of a percent level. At SwissFEL, before injection into the undulator it is foreseen to remove the residual chirp using the wakes in the C-band accelerating structures of the linac. This scheme works well for the hard X-ray undulator line, which includes the largest accumulation of wakefields, but it leaves a residual chirp in the other undulator line for the soft X-ray beam line, midway in the main linac. Another possibility to remove the residual chirp consists in using the longitudinal wakefields generated by a corrugated beam pipe, as recently proposed by G. Stupakov et al. Before planning a dechirper section in a FEL, an experimental verification of the analytical formulae describing the wakefields is crucial. The SwissFEL injector test facility (SITF) fulfils all the necessary criteria to perform such a proof of principle. We are investigating the technical implementation to perform an experiment in SITF in the second half of 2014. In this paper we present the tracking studies performed to optimize the experiment layout.